RE: [Xen-devel] Compiling nouveau open source nvidia graphics card drivers for Xen paravirt-operations domain 0 kernel

["Teo En Ming (Zhang Enming)" <enming.teo@xxxxxxxxxxxxxxx>]

Nope. What is the link?

 

Regards,
 

Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)

Technical Support Engineer

Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541

Republic of Singapore
Mobile: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx

---

From: Boris Derzhavets [mailto:bderzhavets@xxxxxxxxx]
Sent: Saturday, August 22, 2009 9:23 PM
To: enming.teo@xxxxxxxxxxxxxxx
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-devel] Compiling nouveau open source nvidia graphics card drivers for Xen paravirt-operations domain 0 kernel

 

All what i do on F11:-

# yum install vncserver

Then put in /etc/rc.local

export HOME=/root
vncserver :1 -geometry 1280x1024 -depth 16

Reboot Xen Host and connect remotely via vncviewer  , using local X-server and GDM on Xen Host. KDM fails to with Xen.

There was one feed from Ian Campbell regarding Nvidia support by pvops kernel,
followed by Jeremy Fitzhardinge notice. :(

 Do you remember that ?

Boris.
P.S. GeForce 8500 GT installed on my box.
--- On Sat, 8/22/09, Mr. Teo En Ming (Zhang Enming) <enming.teo@xxxxxxxxxxxxxxx> wrote:

From: Mr. Teo En Ming (Zhang Enming) <enming.teo@xxxxxxxxxxxxxxx>
Subject: Re: [Xen-devel] Compiling nouveau open source nvidia graphics card drivers for Xen paravirt-operations domain 0 kernel
To: enming.teo@xxxxxxxxxxxxxxx
Cc: bderzhavets@xxxxxxxxx, xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Saturday, August 22, 2009, 8:57 AM

I might give Driver "intel" a try in xorg.conf.. Let me reboot to Intel GMA4500 first.

-- 

Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) 

Technical Support Engineer 

Information Technology Department

Asiasoft Online Pte Ltd

Tampines Central 1 #04-01 Tampines Plaza 

Singapore 529541

Republic of Singapore

Mobile: +65-9648-9798

MSN: teoenming@xxxxxxxxxxx

Alma Maters: Singapore Polytechnic, National University of Singapore

On 08/22/2009 08:53 PM, Mr. Teo En Ming (Zhang Enming) wrote:

Dear Boris,

Could you get X.org X server to work with Xen pv-ops dom 0 kernels 2.6.30-rc3 and 2.6.31-rc6 under Fedora 11 64-bit?

There is no nouveau driver for jeremy's dom 0 kernel. And when I tried to compiled nouveau against Jeremy's kernel, it would not work.

Although I could compile and install official nvidia drivers against Jeremy's kernel, X server will hang and freeze.

So I tried to use driver "nv" and "vesa" for X server when I booted Jeremy's kernel. But X still would not work and give me a backtrace.

All this is when I am using NVIDIA Geforce 8400 GS PCI Express x16.

If I switch over to using onboard integrated graphics Intel GMA 4500, is it supported under Jeremy Fitzhardinge's pvops dom 0 kernel? What driver can I use in xorg.conf?

Thank you.

-- 

Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) 

Technical Support Engineer 

Information Technology Department

Asiasoft Online Pte Ltd

Tampines Central 1 #04-01 Tampines Plaza 

Singapore 529541

Republic of Singapore

Mobile: +65-9648-9798

MSN: teoenming@xxxxxxxxxxx

Alma Maters: Singapore Polytechnic, National University of Singapore

On 08/22/2009 08:44 PM, Boris Derzhavets wrote:

> Do I need to request nouveau and tungsten developers to make ttm and nouveau
> code Xen pvops dom 0 aware?

Why would you expect them to take care of Xen pvops ?


Boris.

--- On Sat, 8/22/09, Mr. Teo En Ming (Zhang Enming) <enming.teo@xxxxxxxxxxxxxxx> wrote:

From: Mr. Teo En Ming (Zhang Enming) <enming.teo@xxxxxxxxxxxxxxx>
Subject: Re: [Xen-devel] Compiling nouveau open source nvidia graphics card drivers for Xen paravirt-operations domain 0 kernel
To: enming.teo@xxxxxxxxxxxxxxx
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Saturday, August 22, 2009, 8:31 AM

Dear Pasi,

I have compiled ttm and nouveau successfully against the stock/vanilla 2.6.31-rc6 kernel WITHOUT Xen paravirt-ops Domain 0 patch.

So it seems that nouveau could not be compiled against Xen pv-ops dom 0 kernel and could not work with it.

Do I need to request nouveau and tungsten developers to make ttm and nouveau code Xen pvops dom 0 aware?

-- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
Alma Maters: Singapore Polytechnic, National University of Singapore



On 08/22/2009 07:43 PM, Mr. Teo En Ming (Zhang Enming) wrote:
> Dear Pasi,
>
> I am now trying to compile ttm and nouveau against stock vanilla 2.6.31-rc6 kernel with-out dom 0 patch.
>




_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

 

 

_______________________________________________

Xen-devel mailing list

  Xen-devel@xxxxxxxxxxxxxxxxxxx

  http://lists.xensource.com/xen-devel

  

 

 

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.63/2316 - Release Date: 08/20/09 18:06:00

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel