Re: [PATCH 2/9] drm/aspeed: replace struct drm_simple_display_pipe with regular atomic helpers

[Thomas Zimmermann <tzimmermann@xxxxxxx>]

Hi,

common points from my arcgpu review applied here as well. See below for 
a new other things.
Am 04.07.26 um 20:31 schrieb Ze Huang:
> Replace simple display pipe with explicit plane, CRTC and encoder
> objects. Move callbacks to plane and CRTC helpers, with vblank handling
> through drm_crtc_funcs.
>
> This removes intermediate simple-pipe layer and uses standard atomic
> helper wiring.
>
> Signed-off-by: Ze Huang <ze.huang@xxxxxxxxxxxxxxxx>
> ---
>   drivers/gpu/drm/aspeed/aspeed_gfx.h      |   5 +-
>   drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c | 156 +++++++++++++++++++++++--------
>   drivers/gpu/drm/aspeed/aspeed_gfx_drv.c  |   3 +-
>   3 files changed, 123 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx.h 
> b/drivers/gpu/drm/aspeed/aspeed_gfx.h
> index 4e6a442c3886..a34811564c0d 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx.h
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h
> @@ -2,7 +2,6 @@
>   /* Copyright 2018 IBM Corporation */
>   
>   #include <drm/drm_device.h>
> -#include <drm/drm_simple_kms_helper.h>
>   
>   struct aspeed_gfx {
>         struct drm_device               drm;
> @@ -17,7 +16,9 @@ struct aspeed_gfx {
>         u32                             throd_val;
>         u32                             scan_line_max;
>   
> -	struct drm_simple_display_pipe	pipe;
> +       struct drm_plane                plane;
> +       struct drm_crtc                 crtc;
> +       struct drm_encoder              encoder;
>         struct drm_connector            connector;
>   };
>   #define to_aspeed_gfx(x) container_of(x, struct aspeed_gfx, drm)
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c 
> b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
> index 7877a57b8e26..3294795c31c4 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
> @@ -5,6 +5,8 @@
>   #include <linux/reset.h>
>   #include <linux/regmap.h>
>   
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_atomic_helper.h>
>   #include <drm/drm_device.h>
>   #include <drm/drm_fb_dma_helper.h>
>   #include <drm/drm_fourcc.h>
> @@ -12,20 +14,13 @@
>   #include <drm/drm_gem_atomic_helper.h>
>   #include <drm/drm_gem_dma_helper.h>
>   #include <drm/drm_panel.h>
> -#include <drm/drm_simple_kms_helper.h>
>   #include <drm/drm_vblank.h>
>   
>   #include "aspeed_gfx.h"
>   
> -static struct aspeed_gfx *
> -drm_pipe_to_aspeed_gfx(struct drm_simple_display_pipe *pipe)
> -{
> -       return container_of(pipe, struct aspeed_gfx, pipe);
> -}
> -
Please create a new helper

  struct drm_aspeed_gfx *to_aspeed_gfx(drm_device *drm)

that does the upcast.

>   static int aspeed_gfx_set_pixel_fmt(struct aspeed_gfx *priv, u32 *bpp)
>   {
> -       struct drm_crtc *crtc = &priv->pipe.crtc;
> +       struct drm_crtc *crtc = &priv->crtc;
>         struct drm_device *drm = crtc->dev;
>         const u32 format = crtc->primary->state->fb->format->format;
>         u32 ctrl1;
> @@ -79,7 +74,7 @@ static void aspeed_gfx_disable_controller(struct aspeed_gfx 
> *priv)
>   
>   static void aspeed_gfx_crtc_mode_set_nofb(struct aspeed_gfx *priv)
>   {
> -       struct drm_display_mode *m = &priv->pipe.crtc.state->adjusted_mode;
> +       struct drm_display_mode *m = &priv->crtc.state->adjusted_mode;
>         u32 ctrl1, d_offset, t_count, bpp;
>         int err;
>   
> @@ -139,33 +134,31 @@ static void aspeed_gfx_crtc_mode_set_nofb(struct aspeed_gfx *priv)
>         writel(priv->throd_val, priv->base + CRT_THROD);
>   }
>   
> -static void aspeed_gfx_pipe_enable(struct drm_simple_display_pipe *pipe,
> -                             struct drm_crtc_state *crtc_state,
> -                             struct drm_plane_state *plane_state)
> +static void aspeed_gfx_crtc_helper_atomic_enable(struct drm_crtc *crtc,
> +                                                struct drm_atomic_commit 
> *state)
Please see my comment on arcgpu for the new naming of 'state'.

>   {
> -       struct aspeed_gfx *priv = drm_pipe_to_aspeed_gfx(pipe);
> -       struct drm_crtc *crtc = &pipe->crtc;
> +       struct aspeed_gfx *priv = container_of(crtc, struct aspeed_gfx, crtc);
Please use  your helper  to_aspeed_gfx(crtc->dev)  to do the upcast.  
Here any in other places.
>   
>   	aspeed_gfx_crtc_mode_set_nofb(priv);
>         aspeed_gfx_enable_controller(priv);
>         drm_crtc_vblank_on(crtc);
>   }
>   
> -static void aspeed_gfx_pipe_disable(struct drm_simple_display_pipe *pipe)
> +static void aspeed_gfx_crtc_helper_atomic_disable(struct drm_crtc *crtc,
> +                                                 struct drm_atomic_commit 
> *state)
>   {
> -       struct aspeed_gfx *priv = drm_pipe_to_aspeed_gfx(pipe);
> -       struct drm_crtc *crtc = &pipe->crtc;
> +       struct aspeed_gfx *priv = container_of(crtc, struct aspeed_gfx, crtc);
Another upcast issue

>   
>   	drm_crtc_vblank_off(crtc);
>         aspeed_gfx_disable_controller(priv);
>   }
>   
> -static void aspeed_gfx_pipe_update(struct drm_simple_display_pipe *pipe,
> -                                  struct drm_plane_state *plane_state)
> +static void aspeed_gfx_plane_helper_atomic_update(struct drm_plane *plane,
> +                                                 struct drm_atomic_commit 
> *state)
>   {
> -       struct aspeed_gfx *priv = drm_pipe_to_aspeed_gfx(pipe);
> -       struct drm_crtc *crtc = &pipe->crtc;
> -       struct drm_framebuffer *fb = pipe->plane.state->fb;
> +       struct aspeed_gfx *priv = container_of(plane, struct aspeed_gfx, plane);
to_aspeed_gfx(plane->dev)

> +       struct drm_crtc *crtc = &priv->crtc;
> +       struct drm_framebuffer *fb = plane->state->fb;
>         struct drm_pending_vblank_event *event;
>         struct drm_gem_dma_object *gem;
>   
> @@ -190,9 +183,9 @@ static void aspeed_gfx_pipe_update(struct drm_simple_display_pipe *pipe,
>         writel(gem->dma_addr, priv->base + CRT_ADDR);
>   }
>   
> -static int aspeed_gfx_enable_vblank(struct drm_simple_display_pipe *pipe)
> +static int aspeed_gfx_crtc_enable_vblank(struct drm_crtc *crtc)
>   {
> -       struct aspeed_gfx *priv = drm_pipe_to_aspeed_gfx(pipe);
> +       struct aspeed_gfx *priv = container_of(crtc, struct aspeed_gfx, crtc);
>         u32 reg = readl(priv->base + CRT_CTRL1);
>   
>   	/* Clear pending VBLANK IRQ */
> @@ -204,9 +197,9 @@ static int aspeed_gfx_enable_vblank(struct 
> drm_simple_display_pipe *pipe)
>         return 0;
>   }
>   
> -static void aspeed_gfx_disable_vblank(struct drm_simple_display_pipe *pipe)
> +static void aspeed_gfx_crtc_disable_vblank(struct drm_crtc *crtc)
>   {
> -       struct aspeed_gfx *priv = drm_pipe_to_aspeed_gfx(pipe);
> +       struct aspeed_gfx *priv = container_of(crtc, struct aspeed_gfx, crtc);
>         u32 reg = readl(priv->base + CRT_CTRL1);
>   
>   	reg &= ~CRT_CTRL_VERTICAL_INTR_EN;
> @@ -216,12 +209,75 @@ static void aspeed_gfx_disable_vblank(struct 
> drm_simple_display_pipe *pipe)
>         writel(reg | CRT_CTRL_VERTICAL_INTR_STS, priv->base + CRT_CTRL1);
>   }
>   
> -static const struct drm_simple_display_pipe_funcs aspeed_gfx_funcs = {
> -       .enable         = aspeed_gfx_pipe_enable,
> -       .disable        = aspeed_gfx_pipe_disable,
> -       .update         = aspeed_gfx_pipe_update,
> -       .enable_vblank  = aspeed_gfx_enable_vblank,
> -       .disable_vblank = aspeed_gfx_disable_vblank,
> +static int aspeed_gfx_plane_helper_atomic_check(struct drm_plane *plane,
> +                                               struct drm_atomic_commit *state)
> +{
> +       struct drm_plane_state *plane_state = 
> drm_atomic_get_new_plane_state(state, plane);
> +       struct drm_crtc *crtc = plane_state->crtc;
> +       struct drm_crtc_state *crtc_state = NULL;
> +       int ret;
> +
> +       if (crtc)
> +               crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
> +
> +       ret = drm_atomic_helper_check_plane_state(plane_state, crtc_state,
> +                                                 DRM_PLANE_NO_SCALING,
> +                                                 DRM_PLANE_NO_SCALING,
> +                                                 false, false);
> +       return ret;
> +}
Return directly.

> +
> +static const struct drm_plane_helper_funcs aspeed_gfx_plane_helper_funcs = {
> +       .prepare_fb     = drm_gem_plane_helper_prepare_fb,
> +       .atomic_check   = aspeed_gfx_plane_helper_atomic_check,
> +       .atomic_update  = aspeed_gfx_plane_helper_atomic_update,
> +};
> +
> +static const struct drm_plane_funcs aspeed_gfx_plane_funcs = {
> +       .update_plane           = drm_atomic_helper_update_plane,
> +       .disable_plane          = drm_atomic_helper_disable_plane,
> +       .destroy                = drm_plane_cleanup,
> +       .reset                  = drm_atomic_helper_plane_reset,
> +       .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
> +       .atomic_destroy_state   = drm_atomic_helper_plane_destroy_state,
> +};
> +
> +static int aspeed_gfx_crtc_helper_atomic_check(struct drm_crtc *crtc,
> +                                              struct drm_atomic_commit *state)
> +{
> +       struct drm_crtc_state *crtc_state = 
> drm_atomic_get_new_crtc_state(state, crtc);
> +       int ret;
> +
> +       if (!crtc_state->enable)
> +               goto out;
> +
> +       ret = drm_atomic_helper_check_crtc_primary_plane(crtc_state);
> +       if (ret)
> +               return ret;
> +
> +out:
> +       return drm_atomic_add_affected_planes(state, crtc);
> +}
See arcpgu on a possible style improvement.

Best regards
Thomas

> +
> +static const struct drm_crtc_helper_funcs aspeed_gfx_crtc_helper_funcs = {
> +       .atomic_check   = aspeed_gfx_crtc_helper_atomic_check,
> +       .atomic_enable  = aspeed_gfx_crtc_helper_atomic_enable,
> +       .atomic_disable = aspeed_gfx_crtc_helper_atomic_disable,
> +};
> +
> +static const struct drm_crtc_funcs aspeed_gfx_crtc_funcs = {
> +       .reset                  = drm_atomic_helper_crtc_reset,
> +       .destroy                = drm_crtc_cleanup,
> +       .set_config             = drm_atomic_helper_set_config,
> +       .page_flip              = drm_atomic_helper_page_flip,
> +       .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
> +       .atomic_destroy_state   = drm_atomic_helper_crtc_destroy_state,
> +       .enable_vblank          = aspeed_gfx_crtc_enable_vblank,
> +       .disable_vblank         = aspeed_gfx_crtc_disable_vblank,
> +};
> +
> +static const struct drm_encoder_funcs aspeed_gfx_encoder_funcs = {
> +       .destroy = drm_encoder_cleanup,
>   };
>   
>   static const uint32_t aspeed_gfx_formats[] = {
> @@ -232,10 +288,36 @@ static const uint32_t aspeed_gfx_formats[] = {
>   int aspeed_gfx_create_pipe(struct drm_device *drm)
>   {
>         struct aspeed_gfx *priv = to_aspeed_gfx(drm);
> +       struct drm_plane *plane = &priv->plane;
> +       struct drm_crtc *crtc = &priv->crtc;
> +       struct drm_encoder *encoder = &priv->encoder;
> +       int ret;
> +
> +       ret = drm_universal_plane_init(drm, plane, 0,
> +                                      &aspeed_gfx_plane_funcs,
> +                                      aspeed_gfx_formats,
> +                                      ARRAY_SIZE(aspeed_gfx_formats),
> +                                      NULL,
> +                                      DRM_PLANE_TYPE_PRIMARY, NULL);
> +       if (ret)
> +               return ret;
> +       drm_plane_helper_add(plane, &aspeed_gfx_plane_helper_funcs);
> +
> +       ret = drm_crtc_init_with_planes(drm, crtc, plane, NULL,
> +                                       &aspeed_gfx_crtc_funcs, NULL);
> +       if (ret)
> +               return ret;
> +       drm_crtc_helper_add(crtc, &aspeed_gfx_crtc_helper_funcs);
> +
> +       ret = drm_encoder_init(drm, encoder, &aspeed_gfx_encoder_funcs,
> +                              DRM_MODE_ENCODER_NONE, NULL);
> +       if (ret)
> +               return ret;
> +       encoder->possible_crtcs = drm_crtc_mask(crtc);
> +
> +       ret = drm_connector_attach_encoder(&priv->connector, encoder);
> +       if (ret)
> +               return ret;
>   
> -	return drm_simple_display_pipe_init(drm, &priv->pipe, &aspeed_gfx_funcs,
> -                                           aspeed_gfx_formats,
> -                                           ARRAY_SIZE(aspeed_gfx_formats),
> -                                           NULL,
> -                                           &priv->connector);
> +       return 0;
>   }
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c 
> b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> index 46094cca2974..b2d805f0c16d 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> @@ -21,7 +21,6 @@
>   #include <drm/drm_gem_framebuffer_helper.h>
>   #include <drm/drm_module.h>
>   #include <drm/drm_probe_helper.h>
> -#include <drm/drm_simple_kms_helper.h>
>   #include <drm/drm_vblank.h>
>   #include <drm/drm_drv.h>
>   
> @@ -130,7 +129,7 @@ static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data)
>         reg = readl(priv->base + CRT_CTRL1);
>   
>   	if (reg & CRT_CTRL_VERTICAL_INTR_STS) {
> -               drm_crtc_handle_vblank(&priv->pipe.crtc);
> +               drm_crtc_handle_vblank(&priv->crtc);
>                 writel(reg, priv->base + priv->int_clr_reg);
>                 return IRQ_HANDLED;
>         }
--
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstr. 146, 90461 Nürnberg, Germany, www.suse.com
GF: Jochen Jaser, Andrew McDonald, Werner Knoblich, (HRB 36809, AG Nürnberg)