|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [PATCH v3 5/6] x86/PCI: avoid re-evaluation of extended config space accessibility
When, during boot, we have already correctly determined availability of
the MMCFG access method for a given bus range, there's then no need to
invoke pci_check_extcfg() again for every of the devices. This in
particular avoids ->ext_cfg to transiently indicate the wrong state.
Switch to using Xen style on lines being touched and immediately adjacent
ones.
Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>
---
v3: New.
--- a/xen/arch/x86/physdev.c
+++ b/xen/arch/x86/physdev.c
@@ -528,6 +528,8 @@ ret_t do_physdev_op(int cmd, XEN_GUEST_H
if ( !ret )
ret = pci_segment_iterate(info.segment, physdev_check_pci_extcfg,
&info);
+ else if ( ret > 0 ) /* Indication of "no change". */
+ ret = 0;
if ( !ret && has_vpci(currd) && (info.flags & XEN_PCI_MMCFG_RESERVED) )
{
--- a/xen/arch/x86/x86_64/mmconfig.h
+++ b/xen/arch/x86/x86_64/mmconfig.h
@@ -74,6 +74,6 @@ int pci_mmcfg_reserved(uint64_t address,
unsigned int flags);
int pci_mmcfg_arch_init(void);
int pci_mmcfg_arch_enable(unsigned int idx);
-void pci_mmcfg_arch_disable(unsigned int idx);
+int pci_mmcfg_arch_disable(unsigned int idx);
#endif /* X86_64_MMCONFIG_H */
--- a/xen/arch/x86/x86_64/mmconfig-shared.c
+++ b/xen/arch/x86/x86_64/mmconfig-shared.c
@@ -388,8 +388,9 @@ static bool __init pci_mmcfg_reject_brok
(unsigned int)cfg->start_bus_number,
(unsigned int)cfg->end_bus_number);
- if (!is_mmconf_reserved(addr, size, i, cfg) ||
- pci_mmcfg_arch_enable(i)) {
+ if ( !is_mmconf_reserved(addr, size, i, cfg) ||
+ pci_mmcfg_arch_enable(i) < 0 )
+ {
pci_mmcfg_arch_disable(i);
valid = 0;
}
@@ -417,8 +418,8 @@ void __init acpi_mmcfg_init(void)
unsigned int i;
pci_mmcfg_arch_init();
- for (i = 0; i < pci_mmcfg_config_num; ++i)
- if (pci_mmcfg_arch_enable(i))
+ for ( i = 0; i < pci_mmcfg_config_num; ++i )
+ if ( pci_mmcfg_arch_enable(i) < 0 )
valid = 0;
} else {
acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
@@ -458,10 +459,11 @@ int pci_mmcfg_reserved(uint64_t address,
segment, start_bus, end_bus, address, cfg->address);
return -EIO;
}
- if (flags & XEN_PCI_MMCFG_RESERVED)
+
+ if ( flags & XEN_PCI_MMCFG_RESERVED )
return pci_mmcfg_arch_enable(i);
- pci_mmcfg_arch_disable(i);
- return 0;
+
+ return pci_mmcfg_arch_disable(i);
}
}
--- a/xen/arch/x86/x86_64/mmconfig_64.c
+++ b/xen/arch/x86/x86_64/mmconfig_64.c
@@ -138,8 +138,9 @@ int pci_mmcfg_arch_enable(unsigned int i
const typeof(pci_mmcfg_config[0]) *cfg = pci_mmcfg_virt[idx].cfg;
unsigned long start_mfn, end_mfn;
- if (pci_mmcfg_virt[idx].virt)
- return 0;
+ if ( pci_mmcfg_virt[idx].virt )
+ return 1;
+
pci_mmcfg_virt[idx].virt = mcfg_ioremap(cfg, idx, PAGE_HYPERVISOR_UC);
if (!pci_mmcfg_virt[idx].virt) {
printk(KERN_ERR "PCI: Cannot map MCFG aperture for segment %04x\n",
@@ -160,10 +161,13 @@ int pci_mmcfg_arch_enable(unsigned int i
return 0;
}
-void pci_mmcfg_arch_disable(unsigned int idx)
+int pci_mmcfg_arch_disable(unsigned int idx)
{
const typeof(pci_mmcfg_config[0]) *cfg = pci_mmcfg_virt[idx].cfg;
+ if ( !pci_mmcfg_virt[idx].virt )
+ return 1;
+
pci_mmcfg_virt[idx].virt = NULL;
/*
* Don't use destroy_xen_mappings() here, or make sure that at least
@@ -173,6 +177,8 @@ void pci_mmcfg_arch_disable(unsigned int
mcfg_ioremap(cfg, idx, 0);
printk(KERN_WARNING "PCI: Not using MCFG for segment %04x bus %02x-%02x\n",
cfg->pci_segment, cfg->start_bus_number, cfg->end_bus_number);
+
+ return 0;
}
bool pci_mmcfg_decode(unsigned long mfn, unsigned int *seg, unsigned int *bdf)
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |