| 
    
 [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [PATCH v7 7/8] xen/arm: enable dom0 to use PCI devices with pci-passthrough=no
 From: Stewart Hildebrand <stewart.hildebrand@xxxxxxx>
Enable the use of IOMMU + PCI in dom0 without having to specify
"pci-passthrough=yes". We rely on dom0 to initialize the PCI controller
and perform a PHYSDEVOP_pci_device_add call to add each device to SMMU.
Enable pci_init() for initializing Xen's internal PCI subsystem, and
allow PHYSDEVOP_pci_device_add when pci-passthrough is disabled.
is_pci_passthrough_enabled() is not an Arm-only construct, so remove the
x86 definition of the function.
Signed-off-by: Stewart Hildebrand <stewart.hildebrand@xxxxxxx>
Signed-off-by: Mykyta Poturai <mykyta_poturai@xxxxxxxx>
---
hmm. Since
  dec9e02f3190 ("xen: avoid generation of stub <asm/pci.h> header")
Should we also move is_pci_passthrough_enabled() back to 
xen/arch/arm/include/asm/pci.h ?
Not sure if PPC/RISC-V will plan on using this check.
v6->v7:
* remove x86 definition of is_pci_passthrough_enabled()
* update comments
* make pci_physdev_op checks stricter
v5->v6:
* new patch - this effectively replaces
  ("Revert "xen/arm: Add cmdline boot option "pci-passthrough = <boolean>""")
---
 xen/arch/arm/pci/pci.c         | 5 +++--
 xen/arch/x86/include/asm/pci.h | 6 ------
 xen/drivers/pci/physdev.c      | 4 ++--
 3 files changed, 5 insertions(+), 10 deletions(-)
diff --git a/xen/arch/arm/pci/pci.c b/xen/arch/arm/pci/pci.c
index 78b97beaef..f2281e81aa 100644
--- a/xen/arch/arm/pci/pci.c
+++ b/xen/arch/arm/pci/pci.c
@@ -16,6 +16,7 @@
 #include <xen/device_tree.h>
 #include <xen/errno.h>
 #include <xen/init.h>
+#include <xen/iommu.h>
 #include <xen/param.h>
 #include <xen/pci.h>
 
@@ -83,9 +84,9 @@ static int __init pci_init(void)
 {
     /*
      * Enable PCI passthrough when has been enabled explicitly
-     * (pci-passthrough=on).
+     * (pci-passthrough=on) or IOMMU is present and enabled.
      */
-    if ( !pci_passthrough_enabled )
+    if ( !is_pci_passthrough_enabled() && !iommu_enabled )
         return 0;
 
     pci_segments_init();
diff --git a/xen/arch/x86/include/asm/pci.h b/xen/arch/x86/include/asm/pci.h
index fd5480d67d..720fcc7f09 100644
--- a/xen/arch/x86/include/asm/pci.h
+++ b/xen/arch/x86/include/asm/pci.h
@@ -49,12 +49,6 @@ bool pci_ro_mmcfg_decode(unsigned long mfn, unsigned int 
*seg,
 extern int pci_mmcfg_config_num;
 extern struct acpi_mcfg_allocation *pci_mmcfg_config;
 
-/* Unlike ARM, PCI passthrough is always enabled for x86. */
-static always_inline bool is_pci_passthrough_enabled(void)
-{
-    return true;
-}
-
 void arch_pci_init_pdev(struct pci_dev *pdev);
 
 static inline bool pci_check_bar(const struct pci_dev *pdev,
diff --git a/xen/drivers/pci/physdev.c b/xen/drivers/pci/physdev.c
index 0161a85e1e..d8a49cadf3 100644
--- a/xen/drivers/pci/physdev.c
+++ b/xen/drivers/pci/physdev.c
@@ -19,7 +19,7 @@ ret_t pci_physdev_op(int cmd, XEN_GUEST_HANDLE_PARAM(void) 
arg)
         struct pci_dev_info pdev_info;
         nodeid_t node = NUMA_NO_NODE;
 
-        if ( !is_pci_passthrough_enabled() )
+        if ( !is_pci_passthrough_enabled() && !iommu_enabled )
             return -EOPNOTSUPP;
 
         ret = -EFAULT;
@@ -57,7 +57,7 @@ ret_t pci_physdev_op(int cmd, XEN_GUEST_HANDLE_PARAM(void) 
arg)
     case PHYSDEVOP_pci_device_remove: {
         struct physdev_pci_device dev;
 
-        if ( !is_pci_passthrough_enabled() )
+        if ( !is_pci_passthrough_enabled() && !iommu_enabled )
             return -EOPNOTSUPP;
 
         ret = -EFAULT;
-- 
2.34.1
 
 
  | 
  
![]()  | 
            
         Lists.xenproject.org is hosted with RackSpace, monitoring our  |