[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v10 4/5] xen/riscv: enable GENERIC_BUG_FRAME



To have working BUG(), WARN(), ASSERT, run_in_exception_handler()
it is needed to enable GENERIC_BUG_FRAME.

Also, <xen/lib.h> is needed to be included for the reason that panic() and
printk() are used in common/bug.c and RISC-V fails if it is not included
with the following errors:
   common/bug.c:69:9: error: implicit declaration of function 'printk'
   [-Werror=implicit-function-declaration]
      69 |         printk("Xen WARN at %s%s:%d\n", prefix, filename,
   lineno);
         |         ^~~~~~
   common/bug.c:77:9: error: implicit declaration of function 'panic'
   [-Werror=implicit-function-declaration]
      77 |         panic("Xen BUG at %s%s:%d\n", prefix, filename,
   lineno);

Signed-off-by: Oleksii Kurochko <oleksii.kurochko@xxxxxxxxx>
---
Changes in V10:
 - put 'select GENERIC_BUG_FRAME' in "Config RISCV".
 - rework do_trap() to not fetch an instruction in case when the cause of trap
   is BUG_insn.
 - drop read_instr() and is_valid_bug_insn().
 - update the commit message.
---
Changes in V9:
 - Rebase on the top of current staging.
 - use GENERIC_BUG_FRAME as now we have common code available.
 - add xen/lib.h to bug.c to fix a compilation error around printk.
 - update the commit message.
 - update the code of read_instr() in traps.c
 - fold two-s if into 1 in do_trap.
---
Changes in V8:
  - remove Pointless initializer of id.
  - make bug_frames[] array constant.
  - remove cast_to_bug_frame(addr).
  - rename is_valig_bugaddr to is_valid_bug_insn().
  - add check that read_instr is used only on xen code
  - update the commit message.
---
Changes in V7:
 - move to this patch the definition of cast_to_bug_frame() from the previous 
patch.
 - update the comment in bug.h.
 - update the comment above do_bug_frame().
 - fix code style.
 - add comment to read_instr func.
 - add space for bug_frames in lds.S.
---
Changes in V6:
  - Avoid LINK_TO_LOAD() as bug.h functionality expected to be used
    after MMU is enabled.
  - Change early_printk() to printk()
---
Changes in V5:
  - Remove "#include <xen/types.h>" from <asm/bug.h> as there is no any need in 
it anymore
  - Update macros GET_INSN_LENGTH: remove UL and 'unsigned int len;' from it
  - Remove " include <xen/bug.h>" from risc/setup.c. it is not needed in the 
current version of
    the patch
  - change an argument type from vaddr_t to uint32_t for is_valid_bugaddr and 
introduce read_instr() to
    read instruction properly as the length of qinstruction can be either 32 or 
16 bits.
  - Code style fixes
  - update the comments before do_bug_frame() in riscv/trap.c
  - Refactor is_valid_bugaddr() function.
  - introduce macros cast_to_bug_frame(addr) to hide casts.
  - use LINK_TO_LOAD() for addresses which are linker time relative.
---
Changes in V4:
  - Updates in RISC-V's <asm/bug.h>:
    * Add explanatory comment about why there is only defined for 32-bits length
      instructions and 16/32-bits BUG_INSN_{16,32}.
    * Change 'unsigned long' to 'unsigned int' inside GET_INSN_LENGTH().
    * Update declaration of is_valid_bugaddr(): switch return type from int to 
bool
      and the argument from 'unsigned int' to 'vaddr'.
  - Updates in RISC-V's traps.c:
    * replace /xen and /asm includes
    * update definition of is_valid_bugaddr():switch return type from int to 
bool
      and the argument from 'unsigned int' to 'vaddr'. Code style inside 
function
      was updated too.
    * do_bug_frame() refactoring:
      * local variables start and bug became 'const struct bug_frame'
      * bug_frames[] array became 'static const struct bug_frame[] = ...'
      * remove all casts
      * remove unneeded comments and add an explanatory comment that the 
do_bug_frame()
        will be switched to a generic one.
    * do_trap() refactoring:
      * read 16-bits value instead of 32-bits as compressed instruction can
        be used and it might happen than only 16-bits may be accessible.
      * code style updates
      * re-use instr variable instead of re-reading instruction.
  - Updates in setup.c:
    * add blank line between xen/ and asm/ includes.
---
Changes in V3:
  - Rebase the patch "xen/riscv: introduce an implementation of macros
    from <asm/bug.h>" on top of patch series [introduce generic implementation
    of macros from bug.h]
---
Changes in V2:
  - Remove __ in define namings
  - Update run_in_exception_handler() with
    register void *fn_ asm(__stringify(BUG_FN_REG)) = (fn);
  - Remove bug_instr_t type and change it's usage to uint32_t
---
 xen/arch/riscv/Kconfig |  1 +
 xen/arch/riscv/traps.c | 25 ++++++++++++++++++++++++-
 xen/common/bug.c       |  1 +
 3 files changed, 26 insertions(+), 1 deletion(-)

diff --git a/xen/arch/riscv/Kconfig b/xen/arch/riscv/Kconfig
index b4b354a778..f531e96657 100644
--- a/xen/arch/riscv/Kconfig
+++ b/xen/arch/riscv/Kconfig
@@ -1,6 +1,7 @@
 config RISCV
        def_bool y
        select FUNCTION_ALIGNMENT_16B
+       select GENERIC_BUG_FRAME
 
 config RISCV_64
        def_bool y
diff --git a/xen/arch/riscv/traps.c b/xen/arch/riscv/traps.c
index cb18b30ff2..e39603dc95 100644
--- a/xen/arch/riscv/traps.c
+++ b/xen/arch/riscv/traps.c
@@ -5,6 +5,7 @@
  * RISC-V Trap handlers
  */
 
+#include <xen/bug.h>
 #include <xen/lib.h>
 #include <xen/sched.h>
 
@@ -103,7 +104,29 @@ static void do_unexpected_trap(const struct cpu_user_regs 
*regs)
 
 void do_trap(struct cpu_user_regs *cpu_regs)
 {
-    do_unexpected_trap(cpu_regs);
+    register_t pc = cpu_regs->sepc;
+    unsigned long cause = csr_read(CSR_SCAUSE);
+
+    switch ( cause )
+    {
+    case CAUSE_BREAKPOINT:
+        if ( do_bug_frame(cpu_regs, pc) >= 0 )
+        {
+            if ( !pc ||
+                 !(is_kernel_text(pc + 1) || is_kernel_inittext(pc + 1)) )
+            {
+                printk("Something wrong with PC: 0x%lx\n", pc);
+                die();
+            }
+
+            cpu_regs->sepc += GET_INSN_LENGTH(*(uint16_t *)pc);
+            return;
+        }
+
+        break;
+    default:
+        do_unexpected_trap(cpu_regs);
+    }
 }
 
 void vcpu_show_execution_state(struct vcpu *v)
diff --git a/xen/common/bug.c b/xen/common/bug.c
index b7c5d8fd4d..75cb35fcfa 100644
--- a/xen/common/bug.c
+++ b/xen/common/bug.c
@@ -1,6 +1,7 @@
 #include <xen/bug.h>
 #include <xen/errno.h>
 #include <xen/kernel.h>
+#include <xen/lib.h>
 #include <xen/livepatch.h>
 #include <xen/string.h>
 #include <xen/types.h>
-- 
2.45.2




 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.