|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [PATCH v6 00/11] xen/arm: Add Armv8-R64 MPU support to Xen - Part#1
The Armv-R architecture profile was designed to support use cases
that have a high sensitivity to deterministic execution. (e.g.
Fuel Injection, Brake control, Drive trains, Motor control etc)
Arm announced Armv8-R in 2013, it is the latest generation Arm
architecture targeted at the Real-time profile. It introduces
virtualization at the highest security level while retaining the
Protected Memory System Architecture (PMSA) based on a Memory
Protection Unit (MPU). In 2020, Arm announced Cortex-R82,
which is the first Arm 64-bit Cortex-R processor based on Armv8-R64.
The latest Armv8-R64 document can be found [1]. And the features of
Armv8-R64 architecture:
- An exception model that is compatible with the Armv8-A model
- Virtualization with support for guest operating systems
- PMSA virtualization using MPUs In EL2.
- Adds support for the 64-bit A64 instruction set.
- Supports up to 48-bit physical addressing.
- Supports three Exception Levels (ELs)
- Secure EL2 - The Highest Privilege
- Secure EL1 - RichOS (MMU) or RTOS (MPU)
- Secure EL0 - Application Workloads
- Supports only a single Security state - Secure.
- MPU in EL1 & EL2 is configurable, MMU in EL1 is configurable.
These patch series are implementing the Armv8-R64 MPU support
for Xen, which are based on the discussion of
"Proposal for Porting Xen to Armv8-R64 - DraftC" [1].
We will implement the Armv8-R64 and MPU support in three stages:
1. Boot Xen itself to idle thread, do not create any guests on it.
2. Support to boot MPU and MMU domains on Armv8-R64 Xen.
3. SMP and other advanced features of Xen support on Armv8-R64.
We will split these patches to several parts, this series is the
part#1, the full PoC can be found in [3]. More software for
Armv8-R64 can be found in [4];
[1] https://developer.arm.com/documentation/ddi0600/latest
[2] https://lists.xenproject.org/archives/html/xen-devel/2022-05/msg00643.html
[3]
https://gitlab.com/xen-project/people/bmarquis/xen-arm-poc/-/tree/poc/r82-mpu-v2
[4] https://armv8r64-refstack.docs.arm.com/en/v4.0/
Penny Zheng (3):
xen/arm64: create boot-time MPU protection regions
xen/arm64: introduce helpers for MPU enable/disable
xen/arm64: add setup_fixmap and remove_identity_mapping for MPU
Wei Chen (8):
xen/arm: remove xen_phys_start and xenheap_phys_end from config.h
xen/arm: add iounmap after initrd has been loaded in domain_build
xen/arm: disable EFI boot services for MPU systems
xen/arm: adjust Xen TLB helpers for Armv8-R64 PMSA
xen/arm: define Xen start address for FVP BaseR platform
xen/arm: split MMU and MPU config files from config.h
xen/arm: implement FIXMAP_ADDR for MPU systems
xen/arm64: move MMU related code from head.S to head_mmu.S
xen/arch/arm/Kconfig | 15 +-
xen/arch/arm/arm64/Makefile | 5 +
xen/arch/arm/arm64/head.S | 429 ++----------------
xen/arch/arm/arm64/head_mmu.S | 364 +++++++++++++++
xen/arch/arm/arm64/head_mpu.S | 154 +++++++
xen/arch/arm/domain_build.c | 2 +
xen/arch/arm/include/asm/arm64/flushtlb.h | 25 +
xen/arch/arm/include/asm/arm64/macros.h | 52 ++-
xen/arch/arm/include/asm/arm64/mpu.h | 13 +
xen/arch/arm/include/asm/arm64/sysregs.h | 89 ++++
xen/arch/arm/include/asm/config.h | 99 +---
xen/arch/arm/include/asm/config_mmu.h | 119 +++++
xen/arch/arm/include/asm/config_mpu.h | 29 ++
xen/arch/arm/include/asm/fixmap.h | 25 +
xen/arch/arm/include/asm/flushtlb.h | 22 +
.../arm/include/asm/platforms/fvp_baser.h | 18 +
xen/arch/arm/platforms/Kconfig | 16 +-
17 files changed, 976 insertions(+), 500 deletions(-)
create mode 100644 xen/arch/arm/arm64/head_mmu.S
create mode 100644 xen/arch/arm/arm64/head_mpu.S
create mode 100644 xen/arch/arm/include/asm/arm64/mpu.h
create mode 100644 xen/arch/arm/include/asm/config_mmu.h
create mode 100644 xen/arch/arm/include/asm/config_mpu.h
create mode 100644 xen/arch/arm/include/asm/platforms/fvp_baser.h
--
2.25.1
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |