| 
    
 [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [PATCH v4 05/21] IOMMU/x86: restrict IO-APIC mappings for PV Dom0
 On Wed, May 04, 2022 at 12:51:25PM +0200, Jan Beulich wrote:
> On 04.05.2022 12:30, Roger Pau Monné wrote:
> > On Wed, May 04, 2022 at 11:32:51AM +0200, Jan Beulich wrote:
> >> On 03.05.2022 16:50, Jan Beulich wrote:
> >>> On 03.05.2022 15:00, Roger Pau Monné wrote:
> >>>> On Mon, Apr 25, 2022 at 10:34:23AM +0200, Jan Beulich wrote:
> >>>>> While already the case for PVH, there's no reason to treat PV
> >>>>> differently here, though of course the addresses get taken from another
> >>>>> source in this case. Except that, to match CPU side mappings, by default
> >>>>> we permit r/o ones. This then also means we now deal consistently with
> >>>>> IO-APICs whose MMIO is or is not covered by E820 reserved regions.
> >>>>>
> >>>>> Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>
> >>>>> ---
> >>>>> [integrated] v1: Integrate into series.
> >>>>> [standalone] v2: Keep IOMMU mappings in sync with CPU ones.
> >>>>>
> >>>>> --- a/xen/drivers/passthrough/x86/iommu.c
> >>>>> +++ b/xen/drivers/passthrough/x86/iommu.c
> >>>>> @@ -275,12 +275,12 @@ void iommu_identity_map_teardown(struct
> >>>>>      }
> >>>>>  }
> >>>>>  
> >>>>> -static bool __hwdom_init hwdom_iommu_map(const struct domain *d,
> >>>>> -                                         unsigned long pfn,
> >>>>> -                                         unsigned long max_pfn)
> >>>>> +static unsigned int __hwdom_init hwdom_iommu_map(const struct domain 
> >>>>> *d,
> >>>>> +                                                 unsigned long pfn,
> >>>>> +                                                 unsigned long max_pfn)
> >>>>>  {
> >>>>>      mfn_t mfn = _mfn(pfn);
> >>>>> -    unsigned int i, type;
> >>>>> +    unsigned int i, type, perms = IOMMUF_readable | IOMMUF_writable;
> >>>>>  
> >>>>>      /*
> >>>>>       * Set up 1:1 mapping for dom0. Default to include only 
> >>>>> conventional RAM
> >>>>> @@ -289,44 +289,60 @@ static bool __hwdom_init hwdom_iommu_map
> >>>>>       * that fall in unusable ranges for PV Dom0.
> >>>>>       */
> >>>>>      if ( (pfn > max_pfn && !mfn_valid(mfn)) || xen_in_range(pfn) )
> >>>>> -        return false;
> >>>>> +        return 0;
> >>>>>  
> >>>>>      switch ( type = page_get_ram_type(mfn) )
> >>>>>      {
> >>>>>      case RAM_TYPE_UNUSABLE:
> >>>>> -        return false;
> >>>>> +        return 0;
> >>>>>  
> >>>>>      case RAM_TYPE_CONVENTIONAL:
> >>>>>          if ( iommu_hwdom_strict )
> >>>>> -            return false;
> >>>>> +            return 0;
> >>>>>          break;
> >>>>>  
> >>>>>      default:
> >>>>>          if ( type & RAM_TYPE_RESERVED )
> >>>>>          {
> >>>>>              if ( !iommu_hwdom_inclusive && !iommu_hwdom_reserved )
> >>>>> -                return false;
> >>>>> +                perms = 0;
> >>>>>          }
> >>>>> -        else if ( is_hvm_domain(d) || !iommu_hwdom_inclusive || pfn > 
> >>>>> max_pfn )
> >>>>> -            return false;
> >>>>> +        else if ( is_hvm_domain(d) )
> >>>>> +            return 0;
> >>>>> +        else if ( !iommu_hwdom_inclusive || pfn > max_pfn )
> >>>>> +            perms = 0;
> >>>>>      }
> >>>>>  
> >>>>>      /* Check that it doesn't overlap with the Interrupt Address Range. 
> >>>>> */
> >>>>>      if ( pfn >= 0xfee00 && pfn <= 0xfeeff )
> >>>>> -        return false;
> >>>>> +        return 0;
> >>>>>      /* ... or the IO-APIC */
> >>>>> -    for ( i = 0; has_vioapic(d) && i < d->arch.hvm.nr_vioapics; i++ )
> >>>>> -        if ( pfn == PFN_DOWN(domain_vioapic(d, i)->base_address) )
> >>>>> -            return false;
> >>>>> +    if ( has_vioapic(d) )
> >>>>> +    {
> >>>>> +        for ( i = 0; i < d->arch.hvm.nr_vioapics; i++ )
> >>>>> +            if ( pfn == PFN_DOWN(domain_vioapic(d, i)->base_address) )
> >>>>> +                return 0;
> >>>>> +    }
> >>>>> +    else if ( is_pv_domain(d) )
> >>>>> +    {
> >>>>> +        /*
> >>>>> +         * Be consistent with CPU mappings: Dom0 is permitted to 
> >>>>> establish r/o
> >>>>> +         * ones there, so it should also have such established for 
> >>>>> IOMMUs.
> >>>>> +         */
> >>>>> +        for ( i = 0; i < nr_ioapics; i++ )
> >>>>> +            if ( pfn == PFN_DOWN(mp_ioapics[i].mpc_apicaddr) )
> >>>>> +                return rangeset_contains_singleton(mmio_ro_ranges, pfn)
> >>>>> +                       ? IOMMUF_readable : 0;
> >>>>
> >>>> If we really are after consistency with CPU side mappings, we should
> >>>> likely take the whole contents of mmio_ro_ranges and d->iomem_caps
> >>>> into account, not just the pages belonging to the IO-APIC?
> >>>>
> >>>> There could also be HPET pages mapped as RO for PV.
> >>>
> >>> Hmm. This would be a yet bigger functional change, but indeed would 
> >>> further
> >>> improve consistency. But shouldn't we then also establish r/w mappings for
> >>> stuff in ->iomem_caps but not in mmio_ro_ranges? This would feel like 
> >>> going
> >>> too far ...
> >>
> >> FTAOD I didn't mean to say that I think such mappings shouldn't be there;
> >> I have been of the opinion that e.g. I/O directly to/from the linear
> >> frame buffer of a graphics device should in principle be permitted. But
> >> which specific mappings to put in place can imo not be derived from
> >> ->iomem_caps, as we merely subtract certain ranges after initially having
> >> set all bits in it. Besides ranges not mapping any MMIO, even something
> >> like the PCI ECAM ranges (parts of which we may also force to r/o, and
> >> which we would hence cover here if I followed your suggestion) are
> >> questionable in this regard.
> > 
> > Right, ->iomem_caps is indeed too wide for our purpose.  What
> > about using something like:
> > 
> > else if ( is_pv_domain(d) )
> > {
> >     if ( !iomem_access_permitted(d, pfn, pfn) )
> >         return 0;
> 
> We can't return 0 here (as RAM pages also make it here when
> !iommu_hwdom_strict), so I can at best take this as a vague outline
> of what you really mean. And I don't want to rely on RAM pages being
> (imo wrongly) represented by set bits in Dom0's iomem_caps.
Well, yes, my suggestion was taking into account that ->iomem_caps for
dom0 has mostly holes for things that shouldn't be mapped, but
otherwise contains everything else as allowed (including RAM).
We could instead do:
else if ( is_pv_domain(d) && type != RAM_TYPE_CONVENTIONAL )
{
    ...
So that we don't rely on RAM being 'allowed' in ->iomem_caps?
> >     if ( rangeset_contains_singleton(mmio_ro_ranges, pfn) )
> >         return IOMMUF_readable;
> > }
> > 
> > That would get us a bit closer to allowed CPU side mappings, and we
> > don't need to special case IO-APIC or HPET addresses as those are
> > already added to ->iomem_caps or mmio_ro_ranges respectively by
> > dom0_setup_permissions().
> 
> This won't fit in a region of code framed by a (split) comment
> saying "Check that it doesn't overlap with ...". Hence if anything
> I could put something like this further down. Yet even then the
> question remains what to do with ranges which pass
> iomem_access_permitted() but
> - aren't really MMIO,
> - are inside MMCFG,
> - are otherwise special.
> 
> Or did you perhaps mean to suggest something like
> 
> else if ( is_pv_domain(d) && iomem_access_permitted(d, pfn, pfn) &&
>           rangeset_contains_singleton(mmio_ro_ranges, pfn) )
>     return IOMMUF_readable;
I don't think this would be fully correct, as we would still allow
mappings of IO-APIC pages explicitly banned in ->iomem_caps by not
handling those?
> ? Then there would only remain the question of whether mapping r/o
> MMCFG pages is okay (I don't think it is), but that could then be
> special-cased similar to what's done further down for vPCI (by not
> returning in the "else if", but merely updating "perms").
Well part of the point of this is to make CPU and Device mappings
more similar.  I don't think devices have any business in poking at
the MMCFG range, so it's fine to explicitly ban that range.  But I
would have also said the same for IO-APIC pages, so I'm unsure why are
IO-APIC pages fine to be mapped RO, but not the MMCFG range.
Thanks, Roger.
 
 
  | 
  
![]()  | 
            
         Lists.xenproject.org is hosted with RackSpace, monitoring our  |