[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v2] libxl: Retry QMP PCI device_add



PCI device assignment to an HVM with stubdom is potentially racy.  First
the PCI device is assigned to the stubdom via the PV PCI protocol.  Then
QEMU is sent a QMP command to attach the PCI device to QEMU running
within the stubdom.  However, the sysfs entries within the stubdom may
not have appeared by the time QEMU receives the device_add command
resulting in errors like:

libxl_qmp.c:1838:qmp_ev_parse_error_messages:Domain 10:Could not open 
'/sys/bus/pci/devices/0000:00:1f.3/config': No such file or directory

This patch retries the device assignment up to 10 times with a 1 second
delay between.  That roughly matches the overall hotplug timeout for
pci_add_timeout.  pci_add_timeout's initialization is moved to
do_pci_add since retries call into pci_add_qmp_device_add again.

The qmp_ev_parse_error_messages error is still printed since it happens
at a lower level than the pci code controlling the retries.  With that,
the "Retrying PCI add %d" message is also printed at ERROR level to
clarify what is happening.

Signed-off-by: Jason Andryuk <jandryuk@xxxxxxxxx>
---
v2:
Only retry when a stubdom is present.
Move pci_add_timeout initialization.
Use pas->aodev->ao directly.
---
 tools/libs/light/libxl_pci.c | 44 +++++++++++++++++++++++++++++++-----
 1 file changed, 38 insertions(+), 6 deletions(-)

diff --git a/tools/libs/light/libxl_pci.c b/tools/libs/light/libxl_pci.c
index 4bbbfe9f16..96f88795b6 100644
--- a/tools/libs/light/libxl_pci.c
+++ b/tools/libs/light/libxl_pci.c
@@ -1109,8 +1109,10 @@ typedef struct pci_add_state {
     libxl__xswait_state xswait;
     libxl__ev_qmp qmp;
     libxl__ev_time timeout;
+    libxl__ev_time timeout_retries;
     libxl_device_pci pci;
     libxl_domid pci_domid;
+    int retries;
 } pci_add_state;
 
 static void pci_add_qemu_trad_watch_state_cb(libxl__egc *egc,
@@ -1118,6 +1120,8 @@ static void pci_add_qemu_trad_watch_state_cb(libxl__egc 
*egc,
 static void pci_add_qmp_device_add(libxl__egc *, pci_add_state *);
 static void pci_add_qmp_device_add_cb(libxl__egc *,
     libxl__ev_qmp *, const libxl__json_object *, int rc);
+static void pci_add_qmp_device_add_retry(libxl__egc *egc, libxl__ev_time *ev,
+    const struct timeval *requested_abs, int rc);
 static void pci_add_qmp_query_pci_cb(libxl__egc *,
     libxl__ev_qmp *, const libxl__json_object *, int rc);
 static void pci_add_timeout(libxl__egc *egc, libxl__ev_time *ev,
@@ -1137,7 +1141,9 @@ static void do_pci_add(libxl__egc *egc,
     libxl__xswait_init(&pas->xswait);
     libxl__ev_qmp_init(&pas->qmp);
     pas->pci_domid = domid;
+    pas->retries = 0;
     libxl__ev_time_init(&pas->timeout);
+    libxl__ev_time_init(&pas->timeout_retries);
 
     if (type == LIBXL_DOMAIN_TYPE_INVALID) {
         rc = ERROR_FAIL;
@@ -1157,6 +1163,11 @@ static void do_pci_add(libxl__egc *egc,
                 if (rc) goto out;
                 return;
             case LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN:
+                rc = libxl__ev_time_register_rel(ao, &pas->timeout,
+                                                 pci_add_timeout,
+                                                 LIBXL_QMP_CMD_TIMEOUT * 1000);
+                if (rc) goto out;
+
                 pci_add_qmp_device_add(egc, pas); /* must be last */
                 return;
             default:
@@ -1205,11 +1216,6 @@ static void pci_add_qmp_device_add(libxl__egc *egc, 
pci_add_state *pas)
     libxl_device_pci *pci = &pas->pci;
     libxl__ev_qmp *const qmp = &pas->qmp;
 
-    rc = libxl__ev_time_register_rel(ao, &pas->timeout,
-                                     pci_add_timeout,
-                                     LIBXL_QMP_CMD_TIMEOUT * 1000);
-    if (rc) goto out;
-
     libxl__qmp_param_add_string(gc, &args, "driver",
                                 "xen-pci-passthrough");
     QMP_PARAMETERS_SPRINTF(&args, "id", PCI_PT_QDEV_ID,
@@ -1255,7 +1261,23 @@ static void pci_add_qmp_device_add_cb(libxl__egc *egc,
     EGC_GC;
     pci_add_state *pas = CONTAINER_OF(qmp, *pas, qmp);
 
-    if (rc) goto out;
+    if (rc) {
+        /* Retry only applicable for HVM with stubdom. */
+        if (libxl_get_stubdom_id(CTX, qmp->domid) == 0)
+            goto out;
+
+        if (pas->retries++ < 10) {
+            LOGD(ERROR, qmp->domid, "Retrying PCI add %d", pas->retries);
+            rc = libxl__ev_time_register_rel(pas->aodev->ao,
+                                             &pas->timeout_retries,
+                                             pci_add_qmp_device_add_retry,
+                                             1000);
+            if (rc) goto out;
+            return; /* Wait for the timeout to then retry. */
+        } else {
+            goto out;
+        }
+    }
 
     qmp->callback = pci_add_qmp_query_pci_cb;
     rc = libxl__ev_qmp_send(egc, qmp, "query-pci", NULL);
@@ -1266,6 +1288,15 @@ out:
     pci_add_dm_done(egc, pas, rc); /* must be last */
 }
 
+static void pci_add_qmp_device_add_retry(libxl__egc *egc, libxl__ev_time *ev,
+                                         const struct timeval *requested_abs,
+                                         int rc)
+{
+    pci_add_state *pas = CONTAINER_OF(ev, *pas, timeout_retries);
+
+    pci_add_qmp_device_add(egc, pas);
+}
+
 static void pci_add_qmp_query_pci_cb(libxl__egc *egc,
                                      libxl__ev_qmp *qmp,
                                      const libxl__json_object *response,
@@ -1507,6 +1538,7 @@ out_no_irq:
         rc = 0;
 out:
     libxl__ev_time_deregister(gc, &pas->timeout);
+    libxl__ev_time_deregister(gc, &pas->timeout_retries);
     pas->callback(egc, pas, rc);
 }
 
-- 
2.35.1




 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.