[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [PATCH V5 1/2] xen/arm: Add i.MX lpuart driver



> Subject: Re: [PATCH V5 1/2] xen/arm: Add i.MX lpuart driver
> 
> On Thu, 14 Apr 2022, Peng Fan (OSS) wrote:
> > From: Peng Fan <peng.fan@xxxxxxx>
> >
> > The i.MX LPUART Documentation:
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.
> >
> nxp.com%2Fwebapp%2FDownload%3FcolCode%3DIMX8QMIEC&amp;data=04
> %7C01%7Cp
> >
> eng.fan%40nxp.com%7Caf595d02a1dd4ed5825b08da1f2f0e78%7C686ea1d3bc
> 2b4c6
> >
> fa92cd99c5c301635%7C0%7C0%7C637856584221931187%7CUnknown%7CTW
> FpbGZsb3d
> >
> 8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D
> %7C
> >
> 3000&amp;sdata=3N2TsMqzhHF5dem1Cyeo2HVdgfTJFnPHSoMW7KrNph8%3D
> &amp;rese
> > rved=0 Chatper 13.6 Low Power Universal Asynchronous Receiver/
> > Transmitter (LPUART)
> >
> > Tested-by: Henry Wang <Henry.Wang@xxxxxxx>
> > Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> > ---
> >  xen/arch/arm/include/asm/imx-lpuart.h |  64 ++++++
> >  xen/drivers/char/Kconfig              |   7 +
> >  xen/drivers/char/Makefile             |   1 +
> >  xen/drivers/char/imx-lpuart.c         | 276 ++++++++++++++++++++++++++
> >  4 files changed, 348 insertions(+)
> >  create mode 100644 xen/arch/arm/include/asm/imx-lpuart.h
> >  create mode 100644 xen/drivers/char/imx-lpuart.c
> >
> > diff --git a/xen/arch/arm/include/asm/imx-lpuart.h
> > b/xen/arch/arm/include/asm/imx-lpuart.h
> > new file mode 100644
> > index 0000000000..fe859045dc
> > --- /dev/null
> > +++ b/xen/arch/arm/include/asm/imx-lpuart.h
> > @@ -0,0 +1,64 @@
> > +/*
> > + * xen/arch/arm/include/asm/imx-lpuart.h
> > + *
> > + * Common constant definition between early printk and the LPUART
> > +driver
> > + *
> > + * Peng Fan <peng.fan@xxxxxxx>
> > + * Copyright 2022 NXP
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify
> > + * it under the terms of the GNU General Public License as published
> > +by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#ifndef __ASM_ARM_IMX_LPUART_H__
> > +#define __ASM_ARM_IMX_LPUART_H__
> > +
> > +/* 32-bit register definition */
> > +#define UARTBAUD          (0x10)
> > +#define UARTSTAT          (0x14)
> > +#define UARTCTRL          (0x18)
> > +#define UARTDATA          (0x1C)
> > +#define UARTMATCH         (0x20)
> > +#define UARTMODIR         (0x24)
> > +#define UARTFIFO          (0x28)
> > +#define UARTWATER         (0x2c)
> > +
> > +#define UARTSTAT_TDRE     BIT(23, UL)
> > +#define UARTSTAT_TC       BIT(22, UL)
> > +#define UARTSTAT_RDRF     BIT(21, UL)
> > +#define UARTSTAT_OR       BIT(19, UL)
> > +
> > +#define UARTBAUD_OSR_SHIFT    (24)
> > +#define UARTBAUD_OSR_MASK     (0x1f)
> > +#define UARTBAUD_SBR_MASK     (0x1fff)
> > +#define UARTBAUD_BOTHEDGE     (0x00020000)
> > +#define UARTBAUD_TDMAE        (0x00800000)
> > +#define UARTBAUD_RDMAE        (0x00200000)
> > +
> > +#define UARTCTRL_TIE      BIT(23, UL)
> > +#define UARTCTRL_TCIE     BIT(22, UL)
> > +#define UARTCTRL_RIE      BIT(21, UL)
> > +#define UARTCTRL_ILIE     BIT(20, UL)
> > +#define UARTCTRL_TE       BIT(19, UL)
> > +#define UARTCTRL_RE       BIT(18, UL)
> > +#define UARTCTRL_M        BIT(4, UL)
> > +
> > +#define UARTWATER_RXCNT_OFF     24
> > +
> > +#endif /* __ASM_ARM_IMX_LPUART_H__ */
> > +
> > +/*
> > + * Local variables:
> > + * mode: C
> > + * c-file-style: "BSD"
> > + * c-basic-offset: 4
> > + * indent-tabs-mode: nil
> > + * End:
> > + */
> > diff --git a/xen/drivers/char/Kconfig b/xen/drivers/char/Kconfig index
> > 2ff5b288e2..e5f7b1d8eb 100644
> > --- a/xen/drivers/char/Kconfig
> > +++ b/xen/drivers/char/Kconfig
> > @@ -13,6 +13,13 @@ config HAS_CADENCE_UART
> >       This selects the Xilinx Zynq Cadence UART. If you have a Xilinx Zynq
> >       based board, say Y.
> >
> > +config HAS_IMX_LPUART
> > +   bool "i.MX LPUART driver"
> > +   default y
> > +   depends on ARM_64
> > +   help
> > +     This selects the i.MX LPUART. If you have i.MX8QM based board, say Y.
> > +
> >  config HAS_MVEBU
> >     bool "Marvell MVEBU UART driver"
> >     default y
> > diff --git a/xen/drivers/char/Makefile b/xen/drivers/char/Makefile
> > index 7c646d771c..14e67cf072 100644
> > --- a/xen/drivers/char/Makefile
> > +++ b/xen/drivers/char/Makefile
> > @@ -8,6 +8,7 @@ obj-$(CONFIG_HAS_MVEBU) += mvebu-uart.o
> >  obj-$(CONFIG_HAS_OMAP) += omap-uart.o
> >  obj-$(CONFIG_HAS_SCIF) += scif-uart.o
> >  obj-$(CONFIG_HAS_EHCI) += ehci-dbgp.o
> > +obj-$(CONFIG_HAS_IMX_LPUART) += imx-lpuart.o
> >  obj-$(CONFIG_ARM) += arm-uart.o
> >  obj-y += serial.o
> >  obj-$(CONFIG_XEN_GUEST) += xen_pv_console.o diff --git
> > a/xen/drivers/char/imx-lpuart.c b/xen/drivers/char/imx-lpuart.c new
> > file mode 100644 index 0000000000..df44f91e5d
> > --- /dev/null
> > +++ b/xen/drivers/char/imx-lpuart.c
> > @@ -0,0 +1,276 @@
> > +/*
> > + * xen/drivers/char/imx-lpuart.c
> > + *
> > + * Driver for i.MX LPUART.
> > + *
> > + * Peng Fan <peng.fan@xxxxxxx>
> > + * Copyright 2022 NXP
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify
> > + * it under the terms of the GNU General Public License as published
> > +by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <xen/errno.h>
> > +#include <xen/init.h>
> > +#include <xen/irq.h>
> > +#include <xen/mm.h>
> > +#include <xen/serial.h>
> > +#include <asm/device.h>
> > +#include <asm/imx-lpuart.h>
> > +#include <asm/io.h>
> > +
> > +#define imx_lpuart_read(uart, off)       readl((uart)->regs + off)
> > +#define imx_lpuart_write(uart, off, val) writel((val), (uart)->regs +
> > +off)
> > +
> > +static struct imx_lpuart {
> > +    uint32_t baud, clock_hz, data_bits, parity, stop_bits, fifo_size;
> > +    uint32_t irq;
> > +    char __iomem *regs;
> > +    struct irqaction irqaction;
> > +    struct vuart_info vuart;
> > +} imx8_com;
> > +
> > +static void imx_lpuart_interrupt(int irq, void *data,
> > +                                 struct cpu_user_regs *regs) {
> > +    struct serial_port *port = data;
> > +    struct imx_lpuart *uart = port->uart;
> > +    uint32_t sts, rxcnt;
> > +
> > +    sts = imx_lpuart_read(uart, UARTSTAT);
> > +    rxcnt = imx_lpuart_read(uart, UARTWATER) >> UARTWATER_RXCNT_OFF;
> > +
> > +    if ( (sts & UARTSTAT_RDRF) || (rxcnt > 0) )
> > +       serial_rx_interrupt(port, regs);
> > +
> > +    if ( sts & UARTSTAT_TDRE )
> > +       serial_tx_interrupt(port, regs);
> > +
> > +    imx_lpuart_write(uart, UARTSTAT, sts); }
> > +
> > +static void __init imx_lpuart_init_preirq(struct serial_port *port) {
> > +    struct imx_lpuart *uart = port->uart;
> > +    uint32_t ctrl, old_ctrl, bd;
> > +
> > +    old_ctrl = imx_lpuart_read(uart, UARTCTRL);
> > +    ctrl = (old_ctrl & ~UARTCTRL_M) | UARTCTRL_TE | UARTCTRL_RE;
> > +    bd = imx_lpuart_read(uart, UARTBAUD);
> > +
> > +    while ( !(imx_lpuart_read(uart, UARTSTAT) & UARTSTAT_TC) )
> > +       cpu_relax();
> > +
> > +    /* Disable transmit and receive */
> > +    imx_lpuart_write(uart, UARTCTRL, old_ctrl & ~(UARTCTRL_TE |
> > + UARTCTRL_RE));
> > +
> > +    /* Reuse firmware baudrate settings, only disable DMA here */
> > +    bd &= ~(UARTBAUD_TDMAE | UARTBAUD_RDMAE);
> > +
> > +    imx_lpuart_write(uart, UARTMODIR, 0);
> > +    imx_lpuart_write(uart, UARTBAUD, bd);
> > +    imx_lpuart_write(uart, UARTCTRL, ctrl); }
> > +
> > +static void __init imx_lpuart_init_postirq(struct serial_port *port)
> > +{
> > +    struct imx_lpuart *uart = port->uart;
> > +    uint32_t temp;
> > +
> > +    uart->irqaction.handler = imx_lpuart_interrupt;
> > +    uart->irqaction.name = "imx_lpuart";
> > +    uart->irqaction.dev_id = port;
> > +
> > +    if ( setup_irq(uart->irq, 0, &uart->irqaction) != 0 )
> > +    {
> > +        dprintk(XENLOG_ERR, "Failed to allocate imx_lpuart IRQ %d\n",
> > +                uart->irq);
> > +        return;
> > +    }
> > +
> > +    /* Enable interrupts */
> > +    temp = imx_lpuart_read(uart, UARTCTRL);
> > +    temp |= (UARTCTRL_RIE | UARTCTRL_TIE);
> > +    temp |= UARTCTRL_ILIE;
> > +    imx_lpuart_write(uart, UARTCTRL, temp); }
> > +
> > +static void imx_lpuart_suspend(struct serial_port *port) {
> > +    BUG();
> > +}
> > +
> > +static void imx_lpuart_resume(struct serial_port *port) {
> > +    BUG();
> > +}
> > +
> > +static int imx_lpuart_tx_ready(struct serial_port *port) {
> > +    struct imx_lpuart *uart = port->uart;
> > +
> > +    return imx_lpuart_read(uart, UARTSTAT) & UARTSTAT_TC; }
> > +
> > +static void imx_lpuart_putc(struct serial_port *port, char c) {
> > +    struct imx_lpuart *uart = port->uart;
> > +
> > +    while ( !(imx_lpuart_read(uart, UARTSTAT) & UARTSTAT_TDRE) )
> > +        cpu_relax();
> > +
> > +    imx_lpuart_write(uart, UARTDATA, c); }
> > +
> > +static int imx_lpuart_getc(struct serial_port *port, char *pc) {
> > +    struct imx_lpuart *uart = port->uart;
> > +    int ch;
> > +
> > +    while ( !(imx_lpuart_read(uart, UARTSTAT) & UARTSTAT_RDRF) )
> > +       return 0;
> > +
> > +    ch = imx_lpuart_read(uart, UARTDATA);
> > +    *pc = ch & 0xff;
> > +
> > +    if ( imx_lpuart_read(uart, UARTSTAT) &  UARTSTAT_OR )
> > +        imx_lpuart_write(uart, UARTSTAT, UARTSTAT_OR);
> > +
> > +    return 1;
> > +}
> > +
> > +static int __init imx_lpuart_irq(struct serial_port *port) {
> > +    struct imx_lpuart *uart = port->uart;
> > +
> > +    return ((uart->irq > 0) ? uart->irq : -1); }
> > +
> > +static const struct vuart_info *imx_lpuart_vuart_info(struct
> > +serial_port *port) {
> > +    struct imx_lpuart *uart = port->uart;
> > +
> > +    return &uart->vuart;
> > +}
> > +
> > +static void imx_lpuart_start_tx(struct serial_port *port) {
> > +    struct imx_lpuart *uart = port->uart;
> > +    uint32_t temp;
> > +
> > +    temp = imx_lpuart_read(uart, UARTSTAT);
> > +    /* Wait until empty */
> > +    while ( !(temp & UARTSTAT_TDRE) )
> > +       cpu_relax();
> 
> It looks like this is looping over a stale variable?

Oh, yeah, good catch.


Thanks,
Peng.

> 
> 
> > +    temp = imx_lpuart_read(uart, UARTCTRL);
> > +    imx_lpuart_write(uart, UARTCTRL, (temp | UARTCTRL_TIE)); }
> > +
> > +static void imx_lpuart_stop_tx(struct serial_port *port) {
> > +    struct imx_lpuart *uart = port->uart;
> > +    uint32_t temp;
> > +
> > +    temp = imx_lpuart_read(uart, UARTCTRL);
> > +    temp &= ~(UARTCTRL_TIE | UARTCTRL_TCIE);
> > +    imx_lpuart_write(uart, UARTCTRL, temp); }
> > +
> > +static struct uart_driver __read_mostly imx_lpuart_driver = {
> > +    .init_preirq = imx_lpuart_init_preirq,
> > +    .init_postirq = imx_lpuart_init_postirq,
> > +    .endboot = NULL,
> > +    .suspend = imx_lpuart_suspend,
> > +    .resume = imx_lpuart_resume,
> > +    .tx_ready = imx_lpuart_tx_ready,
> > +    .putc = imx_lpuart_putc,
> > +    .getc = imx_lpuart_getc,
> > +    .irq = imx_lpuart_irq,
> > +    .start_tx = imx_lpuart_start_tx,
> > +    .stop_tx = imx_lpuart_stop_tx,
> > +    .vuart_info = imx_lpuart_vuart_info, };
> > +
> > +static int __init imx_lpuart_init(struct dt_device_node *dev,
> > +                                  const void *data) {
> > +    const char *config = data;
> > +    struct imx_lpuart *uart;
> > +    int res;
> > +    u64 addr, size;
> > +
> > +    if ( strcmp(config, "") )
> > +        printk("WARNING: UART configuration is not supported\n");
> > +
> > +    uart = &imx8_com;
> > +
> > +    uart->baud = 115200;
> > +    uart->data_bits = 8;
> > +    uart->parity = 0;
> > +    uart->stop_bits = 1;
> > +
> > +    res = dt_device_get_address(dev, 0, &addr, &size);
> > +    if ( res )
> > +    {
> > +        printk("imx8-lpuart: Unable to retrieve the base"
> > +               " address of the UART\n");
> > +        return res;
> > +    }
> > +
> > +    res = platform_get_irq(dev, 0);
> > +    if ( res < 0 )
> > +    {
> > +        printk("imx8-lpuart: Unable to retrieve the IRQ\n");
> > +        return -EINVAL;
> > +    }
> > +    uart->irq = res;
> > +
> > +    uart->regs = ioremap_nocache(addr, size);
> > +    if ( !uart->regs )
> > +    {
> > +        printk("imx8-lpuart: Unable to map the UART memory\n");
> > +        return -ENOMEM;
> > +    }
> > +
> > +    uart->vuart.base_addr = addr;
> > +    uart->vuart.size = size;
> > +    uart->vuart.data_off = UARTDATA;
> > +    /* tmp from uboot */
> > +    uart->vuart.status_off = UARTSTAT;
> > +    uart->vuart.status = UARTSTAT_TDRE;
> > +
> > +    /* Register with generic serial driver */
> > +    serial_register_uart(SERHND_DTUART, &imx_lpuart_driver, uart);
> > +
> > +    dt_device_set_used_by(dev, DOMID_XEN);
> > +
> > +    return 0;
> > +}
> > +
> > +static const struct dt_device_match imx_lpuart_dt_compat[]
> > +__initconst = {
> > +    DT_MATCH_COMPATIBLE("fsl,imx8qm-lpuart"),
> > +    { /* sentinel */ },
> > +};
> > +
> > +DT_DEVICE_START(imx_lpuart, "i.MX LPUART", DEVICE_SERIAL)
> > +    .dt_match = imx_lpuart_dt_compat,
> > +    .init = imx_lpuart_init,
> > +DT_DEVICE_END
> > +
> > +/*
> > + * Local variables:
> > + * mode: C
> > + * c-file-style: "BSD"
> > + * c-basic-offset: 4
> > + * indent-tabs-mode: nil
> > + * End:
> > + */
> > --
> > 2.35.1
> >



 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.