[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v7 3/7] xen/arm: setup MMIO range trap handlers for hardware domain



Hi Oleksandr,

On 24/11/2021 07:59, Oleksandr Andrushchenko wrote:
From: Oleksandr Andrushchenko <oleksandr_andrushchenko@xxxxxxxx>

In order for vPCI to work it needs to maintain guest and hardware
domain's views of the configuration space. For example, BARs and
COMMAND registers require emulation for guests and the guest view
of the registers needs to be in sync with the real contents of the
relevant registers. For that ECAM address space needs to also be
trapped for the hardware domain, so we need to implement PCI host
bridge specific callbacks to properly setup MMIO handlers for those
ranges depending on particular host bridge implementation.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@xxxxxxxx>
---
Since v6:
- eliminate pci_host_get_num_bridges and make pci_host_iterate_bridges
   return the count
- extend comment in domain_vpci_init
- remove not yet relevant code for num MMIOs and virtual bus topology
- add extra check for has_vpci in domain_vpci_get_num_mmio_handlers
- remove code that fixes num MMIOs for guest domain as it doesn't belong
   to this patch
Since v5:
- add vpci_sbdf_from_gpa helper for gpa to SBDF translation
- take bridge's bus start into account while calculating SBDF
Since v4:
- unsigned int for functions working with count
- gate number of MMIO handlers needed for CONFIG_HAS_PCI_MSI
   and fix their number, e.g. single handler for PBA and
   MSI-X tables (Roger)
- re-work code for assigning MMIO handlers to be simpler
   and account on the fact that there could multiple host bridges
   exist for the hwdom
Since v3:
- fixed comment formatting
Since v2:
- removed unneeded assignment (count = 0)
- removed unneeded header inclusion
- update commit message
Since v1:
  - Dynamically calculate the number of MMIO handlers required for vPCI
    and update the total number accordingly
  - s/clb/cb
  - Do not introduce a new callback for MMIO handler setup
---
  xen/arch/arm/domain.c              |  2 +
  xen/arch/arm/pci/pci-host-common.c | 17 +++++++
  xen/arch/arm/vpci.c                | 79 +++++++++++++++++++++++++++---
  xen/arch/arm/vpci.h                |  6 +++
  xen/include/asm-arm/pci.h          |  4 ++
  5 files changed, 100 insertions(+), 8 deletions(-)

diff --git a/xen/arch/arm/domain.c b/xen/arch/arm/domain.c
index 96e1b235501d..92a6c509e5c5 100644
--- a/xen/arch/arm/domain.c
+++ b/xen/arch/arm/domain.c
@@ -739,6 +739,8 @@ int arch_domain_create(struct domain *d,
      if ( (rc = domain_vgic_register(d, &count)) != 0 )
          goto fail;
+ count += domain_vpci_get_num_mmio_handlers(d);
+
      if ( (rc = domain_io_init(d, count + MAX_IO_HANDLER)) != 0 )
          goto fail;
diff --git a/xen/arch/arm/pci/pci-host-common.c b/xen/arch/arm/pci/pci-host-common.c
index 9653b92b5b2e..18b09d5e6f10 100644
--- a/xen/arch/arm/pci/pci-host-common.c
+++ b/xen/arch/arm/pci/pci-host-common.c
@@ -296,6 +296,23 @@ int pci_get_host_bridge_segment(const struct 
dt_device_node *node,
      return -EINVAL;
  }
+int pci_host_iterate_bridges_and_count(struct domain *d,
+                                       int (*cb)(struct domain *d,
+                                                 struct pci_host_bridge 
*bridge))
+{
+    struct pci_host_bridge *bridge;
+    int err, count = 0;

NIT: err is only used within the loop, so I would suggest to move the declartion variable inside the loop.

+
+    list_for_each_entry( bridge, &pci_host_bridges, node )
+    {
+        err = cb(d, bridge);
+        if ( err )
+            return err;
+        count += err;

Something looks wrong here. You check that err is non-zero and bail out. So err would be 0 and by extend you would always return 0 in success?

+    }
+    return count;
+}
+
  /*
   * Local variables:
   * mode: C
diff --git a/xen/arch/arm/vpci.c b/xen/arch/arm/vpci.c
index 23f45386f4b3..ccd998d8dba2 100644
--- a/xen/arch/arm/vpci.c
+++ b/xen/arch/arm/vpci.c
@@ -16,16 +16,31 @@
#include <asm/mmio.h> +static pci_sbdf_t vpci_sbdf_from_gpa(const struct pci_host_bridge *bridge,
+                                     paddr_t gpa)
+{
+    pci_sbdf_t sbdf;
+
+    if ( bridge )
+    {
+        sbdf.sbdf = VPCI_ECAM_BDF(gpa - bridge->cfg->phys_addr);
+        sbdf.seg = bridge->segment;
+        sbdf.bus += bridge->cfg->busn_start;
+    }
+    else
+        sbdf.sbdf = VPCI_ECAM_BDF(gpa - GUEST_VPCI_ECAM_BASE);
+
+    return sbdf;
+}
+
  static int vpci_mmio_read(struct vcpu *v, mmio_info_t *info,
                            register_t *r, void *p)
  {
-    pci_sbdf_t sbdf;
+    struct pci_host_bridge *bridge = p;
+    pci_sbdf_t sbdf = vpci_sbdf_from_gpa(bridge, info->gpa);
      /* data is needed to prevent a pointer cast on 32bit */
      unsigned long data;
- /* We ignore segment part and always handle segment 0 */
-    sbdf.sbdf = VPCI_ECAM_BDF(info->gpa - GUEST_VPCI_ECAM_BASE);
-
      if ( vpci_ecam_read(sbdf, ECAM_REG_OFFSET(info->gpa),
                          1U << info->dabt.size, &data) )
      {
@@ -41,10 +56,8 @@ static int vpci_mmio_read(struct vcpu *v, mmio_info_t *info,
  static int vpci_mmio_write(struct vcpu *v, mmio_info_t *info,
                             register_t r, void *p)
  {
-    pci_sbdf_t sbdf;
-
-    /* We ignore segment part and always handle segment 0 */
-    sbdf.sbdf = VPCI_ECAM_BDF(info->gpa - GUEST_VPCI_ECAM_BASE);
+    struct pci_host_bridge *bridge = p;
+    pci_sbdf_t sbdf = vpci_sbdf_from_gpa(bridge, info->gpa);
return vpci_ecam_write(sbdf, ECAM_REG_OFFSET(info->gpa),
                             1U << info->dabt.size, r);
@@ -55,17 +68,67 @@ static const struct mmio_handler_ops vpci_mmio_handler = {
      .write = vpci_mmio_write,
  };
+static int vpci_setup_mmio_handler_cb(struct domain *d,
+                                      struct pci_host_bridge *bridge)
+{
+    struct pci_config_window *cfg = bridge->cfg;
+
+    register_mmio_handler(d, &vpci_mmio_handler,
+                          cfg->phys_addr, cfg->size, bridge);
+
+    /* We have registered a single MMIO handler. */
+    return 1;
+}
+
  int domain_vpci_init(struct domain *d)
  {
      if ( !has_vpci(d) )
          return 0;
+ /*
+     * The hardware domain gets as many MMIOs as required by the
+     * physical host bridge.
+     * Guests get the virtual platform layout: one virtual host bridge for now.
+     */
+    if ( is_hardware_domain(d) )
+    {
+        int count;
+
+        count = pci_host_iterate_bridges_and_count(d, 
vpci_setup_mmio_handler_cb);
+        if ( count < 0 )
+            return count;
+
+        return 0;

This could be simplified to "return (count < 0) ? count : 0;". Although my preference would be to move the guest part in an else.

+    }
+
      register_mmio_handler(d, &vpci_mmio_handler,
                            GUEST_VPCI_ECAM_BASE, GUEST_VPCI_ECAM_SIZE, NULL);
return 0;
  }
+static int vpci_get_num_handlers_cb(struct domain *d,
+                                    struct pci_host_bridge *bridge)
+{
+    /* Each bridge has a single MMIO handler for the configuration space. */
+    return 1;
+}
+
+unsigned int domain_vpci_get_num_mmio_handlers(struct domain *d)
+{
+    if ( !has_vpci(d) )
+        return 0;
+
+    if ( is_hardware_domain(d) )
+    {
+        int ret = pci_host_iterate_bridges_and_count(d, 
vpci_get_num_handlers_cb);
+
+        return ret < 0 ? 0 : ret;
+    }
+
+    return 0;
+}
+
  /*
   * Local variables:
   * mode: C
diff --git a/xen/arch/arm/vpci.h b/xen/arch/arm/vpci.h
index d8a7b0e3e802..3c713f3fcdb5 100644
--- a/xen/arch/arm/vpci.h
+++ b/xen/arch/arm/vpci.h
@@ -17,11 +17,17 @@
#ifdef CONFIG_HAS_VPCI
  int domain_vpci_init(struct domain *d);
+unsigned int domain_vpci_get_num_mmio_handlers(struct domain *d);
  #else
  static inline int domain_vpci_init(struct domain *d)
  {
      return 0;
  }
+
+static inline unsigned int domain_vpci_get_num_mmio_handlers(struct domain *d)
+{
+    return 0;
+}
  #endif
#endif /* __ARCH_ARM_VPCI_H__ */
diff --git a/xen/include/asm-arm/pci.h b/xen/include/asm-arm/pci.h
index c20eba643d86..4278d66e5eb9 100644
--- a/xen/include/asm-arm/pci.h
+++ b/xen/include/asm-arm/pci.h
@@ -110,6 +110,10 @@ void arch_pci_init_pdev(struct pci_dev *pdev);
int pci_get_new_domain_nr(void); +int pci_host_iterate_bridges_and_count(struct domain *d,
+                                       int (*cb)(struct domain *d,
+                                                 struct pci_host_bridge 
*bridge));
+
  #else   /*!CONFIG_HAS_PCI*/
struct arch_pci_dev { };


Cheers,

--
Julien Grall



 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.