Re: [RFC PATCH 0/2] Boot time cpupools

[Juergen Gross <jgross@xxxxxxxx>]

On 18.11.21 03:19, Stefano Stabellini wrote:
> On Wed, 17 Nov 2021, Julien Grall wrote:
> > > > > > On 17 Nov 2021, at 10:26, Julien Grall <julien@xxxxxxx> wrote:
> > > > > >
> > > > > > Hi Luca,
> > > > > >
> > > > > > On 17/11/2021 09:57, Luca Fancellu wrote:
> > > > > > > Currently Xen creates a default cpupool0 that contains all the cpu
> > > > > > > brought up
> > > > > > > during boot and it assumes that the platform has only one kind of
> > > > > > > CPU.
> > > > > > > This assumption does not hold on big.LITTLE platform, but putting
> > > > > > > different
> > > > > > > type of CPU in the same cpupool can result in instability and
> > > > > > > security issues
> > > > > > > for the domains running on the pool.
> > > > > > I agree that you can't move a LITTLE vCPU to a big pCPU. However...
> > > > > >
> > > > > > > For this reason this serie introduces an architecture specific way
> > > > > > > to create
> > > > > > > different cpupool at boot time, this is particularly useful on ARM
> > > > > > > big.LITTLE
> > > > > > > platform where there might be the need to have different cpupools
> > > > > > > for each type
> > > > > > > of core, but also systems using NUMA can have different cpu pool for
> > > > > > > each node.
> > > > > > ... from my understanding, all the vCPUs of a domain have to be in the
> > > > > > same cpupool. So with this approach it is not possible:
> > > > > >     1) to have a mix of LITTLE and big vCPUs in the domain
> > > > > >     2) to create a domain spanning across two NUMA nodes
> > > > > >
> > > > > > So I think we need to make sure that any solutions we go through will
> > > > > > not prevent us to implement those setups.
> > > > > The point of this patch is to make all cores available without breaking
> > > > > the current behaviour of existing system.
> > > > I might be missing some context here. By breaking current behavior, do you
> > > > mean user that may want to add "hmp-unsafe" on the command line?
> > > Right, with hmp-unsafe the behaviour is now the same as without, only extra
> > > cores are parked in other cpupools.
> > >
> > > So you have a point in fact that behaviour is changed for someone who was
> > > using hmp-unsafe before if this is activated.
> > > The command line argument suggested by Jurgen definitely makes sense here.
> > >
> > > We could instead do the following:
> > > - when this is activated in the configuration, boot all cores and park them
> > > in different pools (depending on command line argument). Current behaviour
> > > not change if other pools are not used (but more cores will be on in xen)
> >  From my understanding, it is possible to move a pCPU in/out a pool afterwards.
> > So the security concern with big.LITTLE is still present, even though it would
> > be difficult to hit it.
> As far as I know moving a pCPU in/out of a pool is something that cannot
> happen automatically: it requires manual intervention to the user and it
> is uncommon. We could print a warning or simply return error to prevent
> the action from happening. Or something like:
>
> "This action might result in memory corruptions and invalid behavior. Do
> you want to continue? [Y/N]
This should only be rejected if the source and target pool are not
compatible. So a cpupool could be attributed to allow only specific
cpus (and maybe domains?) in it.

Otherwise it would be impossible to create new cpupools after boot on
such a system and populating them with cpus.

> > I am also concerned that it would be more difficult to detect any
> > misconfiguration. So I think this option would still need to be turned on only
> > if hmp-unsafe are the new command line one are both on.
> >
> > If we want to enable it without hmp-unsafe on, we would need to at least lock
> > the pools.
> Locking the pools is a good idea.
This would be another option, yes.

> My preference is not to tie this feature to the hmp-unsafe command line,
> more on this below.
I agree.

> > > - when hmp-unsafe is on, this feature will be turned of (if activated in
> > > configuration) and all cores would be added in the same pool.
> > >
> > > What do you think ?
> > I am split. On one hand, this is making easier for someone to try big.LITTLE
> > as you don't have manually pin vCPUs. On the other hand, this is handling a
> > single use-case and you would need to use hmp-unsafe and pinning if you want
> > to get more exotic setup (e.g. a domain with big.LITTLE).
> >
> > Another possible solution is to pin dom0 vCPUs (AFAIK they are just sticky by
> > default) and then create the pools from dom0 userspace. My assumption is for
> > dom0less we would want to use pinning instead.
> >
> > That said I would like to hear from Xilinx and EPAM as, IIRC, they are already
> > using hmp-unsafe in production.
> This discussion has been very interesting, it is cool to hear new ideas
> like this one. I have a couple of thoughts to share.
>
> First I think that the ability of creating cpupools at boot time is
> super important. It goes way beyond big.LITTLE. It would be incredibly
> useful to separate real-time (sched=null) and non-real-time
> (sched=credit2) workloads. I think it will only become more important
> going forward so I'd love to see an option to configure cpupools that
> works for dom0less. It could be based on device tree properties rather
> than kconfig options.
I think device tree AND command line option should be possible (think of
x86 here).

> It is true that if we had the devicetree-based cpupool configuration I
> mentioned, then somebody could use it to create cpupools matching
> big.LITTLE. So "in theory" it solves the problem. However, I think that
> for big.LITTLE it would be suboptimal. For big.LITTLE it would be best
> if Xen configured the cpupools automatically rather than based on the
> device tree configuration. That way, it is going to work automatically
> without extra steps even in the simplest Xen setups.
>
> So I think that it is a good idea to have a command line option (better
> than a kconfig option) to trigger the MIDR-based cpupool creation at
> boot time. The option could be called midr-cpupools=on/off or
> hw-cpupools=on/off for example.
I'd rather go for:

cpupools=<options>

With e.g. <options>:

- "auto-midr": split system into cpupools based on MIDR
- "auto-numa": split system into cpupools based on NUMA nodes
- "cpus=<list of cpus>[,sched=<scheduler>]

This would be rather flexible without adding more and more options
doing similar things. Other sub-options could be added rather easily.

> In terms of whether it should be the default or not, I don't feel
> strongly about it. Unfortunately we (Xilinx) rely on a number of
> non-default options already so we are already in the situation where we
> have to be extra-careful at the options passed. I don't think that
> adding one more would make a significant difference either way.
>
>
> But my preference is *not* to tie the new command line option with
> hmp-unsafe because if you use midr-cpupools and don't mess with the
> pools then it is actually safe. We could even lock the cpupools like
> Julien suggested or warn/return error on changing the cpupools. In this
> scenario, it would be detrimental to also pass hmp-unsafe: it would
> allow actually unsafe configurations that the user wanted to avoid by
> using midr-cpupools. It would end up disabling checks we could put in
> place to make midr-cpupools safer.
>
> So in short I think it should be:
>
> - midr-cpupools alone
> cpupools created at boot, warning/errors on changing cpupools
>
> - midr-cpupools + hmp-unsafe
> cpupools created at boot, changing cpupools is allowed (we could still
> warn but no errors)
I'd rather add an explicit ",locked" option to above cpupools parameter.

> - hmp-unsafe alone
> same as today with hmp-unsafe
>
>
> For the default as I said I don't have a strong preference. I think
> midr-cpupools could be "on" be default.
What about making this a Kconfig option?


Juergen

Attachment: OpenPGP_0xB0DE9DD628BF132F.asc
Description: OpenPGP public key

Attachment: OpenPGP_signature
Description: OpenPGP digital signature