Re: [PATCH v4 1/2] xen-pciback: prepare for the split for stub and PV

[Stefano Stabellini <sstabellini@xxxxxxxxxx>]

On Mon, 27 Sep 2021, Juergen Gross wrote:
> On 27.09.21 09:35, Oleksandr Andrushchenko wrote:
> > 
> > On 27.09.21 10:26, Jan Beulich wrote:
> > > On 27.09.2021 08:58, Oleksandr Andrushchenko wrote:
> > > > From: Oleksandr Andrushchenko <oleksandr_andrushchenko@xxxxxxxx>
> > > > 
> > > > Currently PCI backend implements multiple functionalities at a time.
> > > > To name a few:
> > > > 1. It is used as a database for assignable PCI devices, e.g. xl
> > > >      pci-assignable-{add|remove|list} manipulates that list. So,
> > > > whenever
> > > >      the toolstack needs to know which PCI devices can be passed through
> > > >      it reads that from the relevant sysfs entries of the pciback.
> > > > 2. It is used to hold the unbound PCI devices list, e.g. when passing
> > > >      through a PCI device it needs to be unbound from the relevant
> > > > device
> > > >      driver and bound to pciback (strictly speaking it is not required
> > > >      that the device is bound to pciback, but pciback is again used as a
> > > >      database of the passed through PCI devices, so we can re-bind the
> > > >      devices back to their original drivers when guest domain shuts
> > > > down)
> > > > 3. Device reset for the devices being passed through
> > > > 4. Para-virtualised use-cases support
> > > > 
> > > > The para-virtualised part of the driver is not always needed as some
> > > > architectures, e.g. Arm or x86 PVH Dom0, are not using backend-frontend
> > > > model for PCI device passthrough. For such use-cases make the very
> > > > first step in splitting the xen-pciback driver into two parts: Xen
> > > > PCI stub and PCI PV backend drivers.
> > > > 
> > > > Signed-off-by: Oleksandr Andrushchenko
> > > > <oleksandr_andrushchenko@xxxxxxxx>
> > > > 
> > > > ---
> > > > Changes since v3:
> > > > - Move CONFIG_XEN_PCIDEV_STUB to the second patch
> > > I'm afraid this wasn't fully done:
> > > 
> > > > --- a/drivers/xen/xen-pciback/Makefile
> > > > +++ b/drivers/xen/xen-pciback/Makefile
> > > > @@ -1,5 +1,6 @@
> > > >    # SPDX-License-Identifier: GPL-2.0
> > > >    obj-$(CONFIG_XEN_PCIDEV_BACKEND) += xen-pciback.o
> > > > +obj-$(CONFIG_XEN_PCIDEV_STUB) += xen-pciback.o
> > > While benign when added here, this addition still doesn't seem to
> > > belong here.
> > 
> > My bad. So, it seems without CONFIG_XEN_PCIDEV_STUB the change seems
> > 
> > to be non-functional. With CONFIG_XEN_PCIDEV_STUB we fail to build on 32-bit
> > 
> > architectures...
> > 
> > What would be the preference here? Stefano suggested that we still define
> > 
> > CONFIG_XEN_PCIDEV_STUB, but in disabled state, e.g. we add tristate to it
> > 
> > in the second patch
> > 
> > Another option is just to squash the two patches.
> 
> Squashing would be fine for me.
 
It is fine for me to squash the two patches.

But in any case, wouldn't it be better to modify that specific change to:

diff --git a/drivers/xen/xen-pciback/Makefile b/drivers/xen/xen-pciback/Makefile
index e2cb376444a6..e23c758b85ae 100644
--- a/drivers/xen/xen-pciback/Makefile
+++ b/drivers/xen/xen-pciback/Makefile
@@ -1,6 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_XEN_PCIDEV_BACKEND) += xen-pciback.o
-obj-$(CONFIG_XEN_PCIDEV_STUB) += xen-pciback.o
+obj-$(CONFIG_XEN_PCI_STUB) += xen-pciback.o
 
 xen-pciback-y := pci_stub.o pciback_ops.o xenbus.o
 xen-pciback-y += conf_space.o conf_space_header.o \


instead?