[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen-unstable-smoke test] 162411: regressions - FAIL
flight 162411 xen-unstable-smoke real [real] flight 162415 xen-unstable-smoke real-retest [real] http://logs.test-lab.xenproject.org/osstest/logs/162411/ http://logs.test-lab.xenproject.org/osstest/logs/162415/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: test-amd64-amd64-libvirt 17 guest-saverestore fail REGR. vs. 162327 Tests which did not succeed, but are not blocking: test-amd64-amd64-libvirt 15 migrate-support-check fail never pass test-arm64-arm64-xl-xsm 15 migrate-support-check fail never pass test-arm64-arm64-xl-xsm 16 saverestore-support-check fail never pass test-armhf-armhf-xl 15 migrate-support-check fail never pass test-armhf-armhf-xl 16 saverestore-support-check fail never pass version targeted for testing: xen 75f13e9b221e2c8603f15ee1d53318526cf56113 baseline version: xen 5268b2dcf7e5342c8a51ceb4bed3e7740c69f5c1 Last test of basis 162327 2021-06-01 16:01:37 Z 4 days Failing since 162370 2021-06-04 17:01:35 Z 1 days 8 attempts Testing same since 162374 2021-06-04 20:03:35 Z 1 days 7 attempts ------------------------------------------------------------ People who touched revisions under test: Christian Lindig <christian.lindig@xxxxxxxxxx> George Dunlap <george.dunlap@xxxxxxxxxx> Jan Beulich <jbeulich@xxxxxxxx> Juergen Gross <jgross@xxxxxxxx> Wei Liu <wl@xxxxxxx> jobs: build-arm64-xsm pass build-amd64 pass build-armhf pass build-amd64-libvirt pass test-armhf-armhf-xl pass test-arm64-arm64-xl-xsm pass test-amd64-amd64-xl-qemuu-debianhvm-amd64 pass test-amd64-amd64-libvirt fail ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary Not pushing. ------------------------------------------------------------ commit 75f13e9b221e2c8603f15ee1d53318526cf56113 Author: Juergen Gross <jgross@xxxxxxxx> Date: Fri Jun 4 08:02:14 2021 +0200 tools/libs/guest: make some definitions private to libxenguest There are some definitions which are used in libxenguest only now. Move them from libxenctrl over to libxenguest. Remove an unused macro. Signed-off-by: Juergen Gross <jgross@xxxxxxxx> Acked-by: Wei Liu <wl@xxxxxxx> commit 455790573d3bbad6d5a1bb7e9d28b6dd71075693 Author: Juergen Gross <jgross@xxxxxxxx> Date: Fri Jun 4 08:02:13 2021 +0200 tools/libs: move xc_core* from libxenctrl to libxenguest The functionality in xc_core* should be part of libxenguest instead of libxenctrl. Users are already either in libxenguest, or in xl. There is one single exception: xc_core_arch_auto_translated_physmap() is being used by xc_domain_memory_mapping(), which is used by qemu. So leave the xc_core_arch_auto_translated_physmap() functionality in libxenctrl. This will make it easier to merge common functionality of xc_core* and xg_sr_save*. Signed-off-by: Juergen Gross <jgross@xxxxxxxx> Acked-by: Wei Liu <wl@xxxxxxx> commit bf1fc18901dfea05a69f661493b934c0db7d3503 Author: Juergen Gross <jgross@xxxxxxxx> Date: Fri Jun 4 08:02:12 2021 +0200 tools/libs: move xc_resume.c to libxenguest The guest suspend functionality is already part of libxenguest. Move the resume functionality from libxenctrl to libxenguest, too. Signed-off-by: Juergen Gross <jgross@xxxxxxxx> Acked-by: Wei Liu <wl@xxxxxxx> commit f183854facad996fe891c086c024bca7cbcdc1e4 Author: Juergen Gross <jgross@xxxxxxxx> Date: Fri Jun 4 08:02:11 2021 +0200 tools/libs/ctrl: use common p2m mapping code in xc_domain_resume_any() Instead of open coding the mapping of the p2m list use the already existing xc_core_arch_map_p2m() call, especially as the current code does not support guests with the linear p2m map. It should be noted that this code is needed for colo/remus only. Switching to xc_core_arch_map_p2m() drops the need to bail out for bitness of tool stack and guest differing. Signed-off-by: Juergen Gross <jgross@xxxxxxxx> Acked-by: Christian Lindig <christian.lindig@xxxxxxxxxx> Acked-by: Wei Liu <wl@xxxxxxx> commit bd7a29c3d0b937ab542abea06ff1b575abe7247a Author: Juergen Gross <jgross@xxxxxxxx> Date: Fri Jun 4 08:02:10 2021 +0200 tools/libs/ctrl: fix xc_core_arch_map_p2m() to support linear p2m table The core of a pv linux guest produced via "xl dump-core" is nor usable as since kernel 4.14 only the linear p2m table is kept if Xen indicates it is supporting that. Unfortunately xc_core_arch_map_p2m() is still supporting the 3-level p2m tree only. Fix that by copying the functionality of map_p2m() from libxenguest to libxenctrl. Additionally the mapped p2m isn't of a fixed length now, so the interface to the mapping functions needs to be adapted. In order not to add even more parameters, expand struct domain_info_context and use a pointer to that as a parameter. Fixes: dc6d60937121 ("libxc: set flag for support of linear p2m list in domain builder") Signed-off-by: Juergen Gross <jgross@xxxxxxxx> Acked-by: Wei Liu <wl@xxxxxxx> commit 7bd8989ab77b6ade3b7a5f4b640a55248d1791a3 Author: Juergen Gross <jgross@xxxxxxxx> Date: Fri Jun 4 08:02:09 2021 +0200 tools/libs/guest: fix max_pfn setting in map_p2m() When setting the highest pfn used in the guest, don't subtract 1 from the value read from the shared_info data. The value read already is the correct pfn. Fixes: 91e204d37f449 ("libxc: try to find last used pfn when migrating") Signed-off-by: Juergen Gross <jgross@xxxxxxxx> Acked-by: Wei Liu <wl@xxxxxxx> commit 1a0f2fe2297d122a08fee2b26de5de995fdeca13 Author: George Dunlap <george.dunlap@xxxxxxxxxx> Date: Thu May 6 13:38:02 2021 +0100 SUPPORT.md: Un-shimmed 32-bit PV guests are no longer supported The support status of 32-bit guests doesn't seem particularly useful. With it changed to fully unsupported outside of PV-shim, adjust the PV32 Kconfig default accordingly. Reported-by: Jann Horn <jannh@xxxxxxxxxx> Signed-off-by: George Dunlap <george.dunlap@xxxxxxxxxx> Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> (qemu changes not included)
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |