Xen project Mailing List

[PATCH v8 2/2] xen: Add files needed for minimal riscv build

Add arch-specific makefiles and configs needed to build for riscv. Also add a minimal head.S that is a simple infinite loop. head.o can be built with $ make XEN_TARGET_ARCH=riscv64 SUBSYSTEMS=xen -C xen tiny64_defconfig $ make XEN_TARGET_ARCH=riscv64 SUBSYSTEMS=xen -C xen TARGET=riscv64/head.o No other TARGET is supported at the moment. Signed-off-by: Connor Davis <connojdavis@xxxxxxxxx> Reviewed-by: Alistair Francis <alistair.francis@xxxxxxx> --- MAINTAINERS | 9 +++++ config/riscv64.mk | 5 +++ xen/Makefile | 8 +++-- xen/arch/riscv/Kconfig | 48 +++++++++++++++++++++++++ xen/arch/riscv/Kconfig.debug | 0 xen/arch/riscv/Makefile | 2 ++ xen/arch/riscv/Rules.mk | 0 xen/arch/riscv/arch.mk | 14 ++++++++ xen/arch/riscv/configs/tiny64_defconfig | 13 +++++++ xen/arch/riscv/riscv64/asm-offsets.c | 0 xen/arch/riscv/riscv64/head.S | 6 ++++ xen/include/asm-riscv/config.h | 47 ++++++++++++++++++++++++ 12 files changed, 150 insertions(+), 2 deletions(-) create mode 100644 config/riscv64.mk create mode 100644 xen/arch/riscv/Kconfig create mode 100644 xen/arch/riscv/Kconfig.debug create mode 100644 xen/arch/riscv/Makefile create mode 100644 xen/arch/riscv/Rules.mk create mode 100644 xen/arch/riscv/arch.mk create mode 100644 xen/arch/riscv/configs/tiny64_defconfig create mode 100644 xen/arch/riscv/riscv64/asm-offsets.c create mode 100644 xen/arch/riscv/riscv64/head.S create mode 100644 xen/include/asm-riscv/config.h diff --git a/MAINTAINERS b/MAINTAINERS index d46b08a0d2..5a1f92422a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -456,6 +456,15 @@ F: tools/libs/light/libxl_nonetbuffer.c F: tools/hotplug/Linux/remus-netbuf-setup F: tools/hotplug/Linux/block-drbd-probe +RISCV +M: Bob Eshleman <bobbyeshleman@xxxxxxxxx> +M: Alistair Francis <alistair.francis@xxxxxxx> +R: Connor Davis <connojdavis@xxxxxxxxx> +S: Supported +F: config/riscv64.mk +F: xen/arch/riscv/ +F: xen/include/asm-riscv/ + RTDS SCHEDULER M: Dario Faggioli <dfaggioli@xxxxxxxx> M: Meng Xu <mengxu@xxxxxxxxxxxxx> diff --git a/config/riscv64.mk b/config/riscv64.mk new file mode 100644 index 0000000000..a5a21e5fa2 --- /dev/null +++ b/config/riscv64.mk @@ -0,0 +1,5 @@ +CONFIG_RISCV := y +CONFIG_RISCV_64 := y +CONFIG_RISCV_$(XEN_OS) := y + +CONFIG_XEN_INSTALL_SUFFIX := diff --git a/xen/Makefile b/xen/Makefile index 7ce7692354..89879fad4c 100644 --- a/xen/Makefile +++ b/xen/Makefile @@ -26,7 +26,9 @@ MAKEFLAGS += -rR EFI_MOUNTPOINT ?= $(BOOT_DIR)/efi ARCH=$(XEN_TARGET_ARCH) -SRCARCH=$(shell echo $(ARCH) | sed -e 's/x86.*/x86/' -e s'/arm$32\|64$/arm/g') +SRCARCH=$(shell echo $(ARCH) | \ + sed -e 's/x86.*/x86/' -e s'/arm$32\|64$/arm/g' \ + -e s'/riscv.*/riscv/g') # Don't break if the build process wasn't called from the top level # we need XEN_TARGET_ARCH to generate the proper config @@ -35,7 +37,8 @@ include $(XEN_ROOT)/Config.mk # Set ARCH/SUBARCH appropriately. export TARGET_SUBARCH := $(XEN_TARGET_ARCH) export TARGET_ARCH := $(shell echo $(XEN_TARGET_ARCH) | \ - sed -e 's/x86.*/x86/' -e s'/arm$32\|64$/arm/g') + sed -e 's/x86.*/x86/' -e s'/arm$32\|64$/arm/g' \ + -e s'/riscv.*/riscv/g') # Allow someone to change their config file export KCONFIG_CONFIG ?= .config @@ -335,6 +338,7 @@ _clean: delete-unfresh-files $(MAKE) $(clean) xsm $(MAKE) $(clean) crypto $(MAKE) $(clean) arch/arm + $(MAKE) $(clean) arch/riscv $(MAKE) $(clean) arch/x86 $(MAKE) $(clean) test $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) clean diff --git a/xen/arch/riscv/Kconfig b/xen/arch/riscv/Kconfig new file mode 100644 index 0000000000..468e250c86 --- /dev/null +++ b/xen/arch/riscv/Kconfig @@ -0,0 +1,48 @@ +config RISCV + def_bool y + +config RISCV_64 + def_bool y + select 64BIT + +config ARCH_DEFCONFIG + string + default "arch/riscv/configs/tiny64_defconfig" + +menu "Architecture Features" + +source "arch/Kconfig" + +endmenu + +menu "ISA Selection" + +choice + prompt "Base ISA" + default RISCV_ISA_RV64IMA if RISCV_64 + help + This selects the base ISA extensions that Xen will target. + +config RISCV_ISA_RV64IMA + bool "RV64IMA" + help + Use the RV64I base ISA, plus the "M" and "A" extensions + for integer multiply/divide and atomic instructions, respectively. + +endchoice + +config RISCV_ISA_C + bool "Compressed extension" + default y + help + Add "C" to the ISA subsets that the toolchain is allowed to + emit when building Xen, which results in compressed instructions + in the Xen binary. + + If unsure, say Y. + +endmenu + +source "common/Kconfig" + +source "drivers/Kconfig" diff --git a/xen/arch/riscv/Kconfig.debug b/xen/arch/riscv/Kconfig.debug new file mode 100644 index 0000000000..e69de29bb2 diff --git a/xen/arch/riscv/Makefile b/xen/arch/riscv/Makefile new file mode 100644 index 0000000000..942e4ffbc1 --- /dev/null +++ b/xen/arch/riscv/Makefile @@ -0,0 +1,2 @@ +.PHONY: include +include: diff --git a/xen/arch/riscv/Rules.mk b/xen/arch/riscv/Rules.mk new file mode 100644 index 0000000000..e69de29bb2 diff --git a/xen/arch/riscv/arch.mk b/xen/arch/riscv/arch.mk new file mode 100644 index 0000000000..53dadb8975 --- /dev/null +++ b/xen/arch/riscv/arch.mk @@ -0,0 +1,14 @@ +######################################## +# RISCV-specific definitions + +CFLAGS-$(CONFIG_RISCV_64) += -mabi=lp64 + +riscv-march-$(CONFIG_RISCV_ISA_RV64IMA) := rv64ima +riscv-march-$(CONFIG_RISCV_ISA_C) := $(riscv-march-y)c + +# Note that -mcmodel=medany is used so that Xen can be mapped +# into the upper half _or_ the lower half of the address space. +# -mcmodel=medlow would force Xen into the lower half. + +CFLAGS += -march=$(riscv-march-y) -mstrict-align -mcmodel=medany +CFLAGS += -I$(BASEDIR)/include diff --git a/xen/arch/riscv/configs/tiny64_defconfig b/xen/arch/riscv/configs/tiny64_defconfig new file mode 100644 index 0000000000..3c9a2ff941 --- /dev/null +++ b/xen/arch/riscv/configs/tiny64_defconfig @@ -0,0 +1,13 @@ +# CONFIG_SCHED_CREDIT is not set +# CONFIG_SCHED_RTDS is not set +# CONFIG_SCHED_NULL is not set +# CONFIG_SCHED_ARINC653 is not set +# CONFIG_TRACEBUFFER is not set +# CONFIG_HYPFS is not set +# CONFIG_GRANT_TABLE is not set +# CONFIG_SPECULATIVE_HARDEN_ARRAY is not set + +CONFIG_RISCV_64=y +CONFIG_DEBUG=y +CONFIG_DEBUG_INFO=y +CONFIG_EXPERT=y diff --git a/xen/arch/riscv/riscv64/asm-offsets.c b/xen/arch/riscv/riscv64/asm-offsets.c new file mode 100644 index 0000000000..e69de29bb2 diff --git a/xen/arch/riscv/riscv64/head.S b/xen/arch/riscv/riscv64/head.S new file mode 100644 index 0000000000..0dbc27ba75 --- /dev/null +++ b/xen/arch/riscv/riscv64/head.S @@ -0,0 +1,6 @@ +#include <asm/config.h> + + .text + +ENTRY(start) + j start diff --git a/xen/include/asm-riscv/config.h b/xen/include/asm-riscv/config.h new file mode 100644 index 0000000000..e2ae21de61 --- /dev/null +++ b/xen/include/asm-riscv/config.h @@ -0,0 +1,47 @@ +#ifndef __RISCV_CONFIG_H__ +#define __RISCV_CONFIG_H__ + +#if defined(CONFIG_RISCV_64) +# define LONG_BYTEORDER 3 +# define ELFSIZE 64 +# define MAX_VIRT_CPUS 128u +#else +# error "Unsupported RISCV variant" +#endif + +#define BYTES_PER_LONG (1 << LONG_BYTEORDER) +#define BITS_PER_LONG (BYTES_PER_LONG << 3) +#define POINTER_ALIGN BYTES_PER_LONG + +#define BITS_PER_LLONG 64 + +/* xen_ulong_t is always 64 bits */ +#define BITS_PER_XEN_ULONG 64 + +#define CONFIG_RISCV_L1_CACHE_SHIFT 6 +#define CONFIG_PAGEALLOC_MAX_ORDER 18 +#define CONFIG_DOMU_MAX_ORDER 9 +#define CONFIG_HWDOM_MAX_ORDER 10 + +#define OPT_CONSOLE_STR "dtuart" +#define INVALID_VCPU_ID MAX_VIRT_CPUS + +/* Linkage for RISCV */ +#ifdef __ASSEMBLY__ +#define ALIGN .align 2 + +#define ENTRY(name) \ + .globl name; \ + ALIGN; \ + name: +#endif + +#endif /* __RISCV_CONFIG_H__ */ +/* + * Local variables: + * mode: C + * c-file-style: "BSD" + * c-basic-offset: 4 + * indent-tabs-mode: nil + * End: + */ -- 2.31.1

©2013 Xen Project, A Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation.
Xen Project is a trademark of The Linux Foundation.