[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH 12/13] xenpm: Add set-cpufreq-hwp subcommand



set-cpufreq-hwp allows setting the Hardware P-State (HWP) parameters.

It can be run on all or just a single cpu.  There are presets of
balance, powersave & performance.  Those can be further tweaked by
param:val arguments as explained in the usage description.

Parameter names are just checked to the first 3 characters to shorten
typing.

Some options are hardware dependent, and ranges can be found in
get-cpufreq-para.

Signed-off-by: Jason Andryuk <jandryuk@xxxxxxxxx>
---
 tools/misc/xenpm.c | 240 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 240 insertions(+)

diff --git a/tools/misc/xenpm.c b/tools/misc/xenpm.c
index a686f8f46e..d3bcaf3b58 100644
--- a/tools/misc/xenpm.c
+++ b/tools/misc/xenpm.c
@@ -67,6 +67,25 @@ void show_help(void)
             " set-max-cstate        <num>|'unlimited' [<num2>|'unlimited']\n"
             "                                     set the C-State limitation 
(<num> >= 0) and\n"
             "                                     optionally the C-sub-state 
limitation (<num2> >= 0)\n"
+            " set-cpufreq-hwp       [cpuid] [balance|performance|powersave] 
<param:val>*\n"
+            "                                     set Hardware P-State (HWP) 
parameters\n"
+            "                                     optionally a preset of one 
of\n"
+            "                                       
balance|performance|powersave\n"
+            "                                     an optional list of 
param:val arguments\n"
+            "                                       minimum:N  hw_lowest ... 
hw_highest\n"
+            "                                       maximum:N  hw_lowest ... 
hw_highest\n"
+            "                                       desired:N  hw_lowest ... 
hw_highest\n"
+            "                                           Set explicit 
performance target.\n"
+            "                                           non-zero disables 
auto-HWP mode.\n"
+            "                                       energy_perf:0-255 (or 
0-15)\n"
+            "                                                   
energy/performance hint\n"
+            "                                                   lower favor 
performance\n"
+            "                                                   higher favor 
powersave\n"
+            "                                                   127 (or 7) 
balance\n"
+            "                                       act_window:N{,m,u}s range 
0us-1270s\n"
+            "                                           window for internal 
calculations.\n"
+            "                                           0 lets the hardware 
decide.\n"
+            "                                     get-cpufreq-para returns 
hw_lowest/highest.\n"
             " start [seconds]                     start collect Cx/Px 
statistics,\n"
             "                                     output after CTRL-C or 
SIGINT or several seconds.\n"
             " enable-turbo-mode     [cpuid]       enable Turbo Mode for 
processors that support it.\n"
@@ -1309,6 +1328,226 @@ void disable_turbo_mode(int argc, char *argv[])
                 errno, strerror(errno));
 }
 
+/*
+ * Parse activity_window:NNN{us,ms,s} and validate range.
+ *
+ * Activity window is a 7bit mantissa (0-127) with a 3bit exponent (0-7) base
+ * 10 in microseconds.  So the range is 1 microsecond to 1270 seconds.  A value
+ * of 0 lets the hardware autonomously select the window.
+ *
+ * Return 0 on success
+ *       -1 on error
+ *        1 Not activity_window. i.e. try parsing as another argument
+ */
+static int parse_activity_window(xc_set_hwp_para_t *set_hwp, char *p)
+{
+    char *param = NULL, *val = NULL, *suffix = NULL;
+    unsigned int u;
+    unsigned int exponent = 0;
+    unsigned int multiplier = 1;
+    int ret;
+
+    ret = sscanf(p, "%m[a-z_A-Z]:%ms", &param, &val);
+    if ( ret != 2 )
+    {
+        return -1;
+    }
+
+    if ( strncasecmp(param, "act", 3) != 0 )
+    {
+        ret = 1;
+
+        goto out;
+    }
+
+    free(param);
+    param = NULL;
+
+    ret = sscanf(val, "%u%ms", &u, &suffix);
+    if ( ret != 1 && ret != 2 )
+    {
+        fprintf(stderr, "invalid activity window: %s\n", val);
+
+        ret = -1;
+
+        goto out;
+    }
+
+    if ( ret == 2 && suffix )
+    {
+        if ( strcasecmp(suffix, "s") == 0 )
+        {
+            multiplier = 1000 * 1000;
+            exponent = 6;
+        }
+        else if ( strcasecmp(suffix, "ms") == 0 )
+        {
+            multiplier = 1000;
+            exponent = 3;
+        }
+        else if ( strcasecmp(suffix, "us") == 0 )
+        {
+            multiplier = 1;
+            exponent = 0;
+        }
+        else
+        {
+            fprintf(stderr, "invalid activity window units: %s\n", suffix);
+
+            ret = -1;
+            goto out;
+        }
+    }
+
+    if ( u > 1270 * 1000 * 1000 / multiplier )
+    {
+        fprintf(stderr, "activity window %s too large\n", val);
+
+        ret = -1;
+        goto out;
+    }
+
+    /* looking for 7 bits of mantissa and 3 bits of exponent */
+    while ( u > 127 )
+    {
+        u /= 10;
+        exponent += 1;
+    }
+
+    set_hwp->activity_window = ( exponent & 0x7 ) << 7 | ( u & 0x7f );
+    set_hwp->set_params |= XEN_SYSCTL_HWP_SET_ACT_WINDOW;
+
+    ret = 0;
+
+ out:
+    free(suffix);
+    free(param);
+    free(val);
+
+    return ret;
+}
+
+static int parse_hwp_opts(xc_set_hwp_para_t *set_hwp, int *cpuid,
+                          int argc, char *argv[])
+{
+    int i = 0;
+
+    if ( argc < 1 )
+        return -1;
+
+    if ( parse_cpuid_non_fatal(argv[i], cpuid) == 0 )
+    {
+        i++;
+    }
+
+    if ( i == argc )
+        return -1;
+
+    if ( strcasecmp(argv[i], "powersave") == 0 )
+    {
+        set_hwp->set_params = XEN_SYSCTL_HWP_SET_PRESET_POWERSAVE;
+        i++;
+    }
+    else if ( strcasecmp(argv[i], "performance") == 0 )
+    {
+        set_hwp->set_params = XEN_SYSCTL_HWP_SET_PRESET_PERFORMANCE;
+        i++;
+    }
+    else if ( strcasecmp(argv[i], "balance") == 0 )
+    {
+        set_hwp->set_params = XEN_SYSCTL_HWP_SET_PRESET_BALANCE;
+        i++;
+    }
+
+    for ( ; i < argc; i++)
+    {
+        unsigned int val;
+        char *param;
+        int ret;
+
+        ret = parse_activity_window(set_hwp, argv[i]);
+        switch ( ret )
+        {
+        case -1:
+            return -1;
+        case 0:
+            continue;
+            break;
+        case 1:
+            /* try other parsing */
+            break;
+        }
+
+        /* sscanf can't handle split on ':' for "%ms:%u'  */
+        ret = sscanf(argv[i], "%m[a-zA-Z_]:%u", &param, &val);
+        if ( ret != 2 )
+        {
+            fprintf(stderr, "%s is an invalid hwp parameter.\n", argv[i]);
+            return -1;
+        }
+
+        if ( val > 255 )
+        {
+            fprintf(stderr, "%s value %u is out of range.\n", param, val);
+            return -1;
+        }
+
+        if ( strncasecmp(param, "min", 3) == 0 )
+        {
+            set_hwp->minimum = val;
+            set_hwp->set_params |= XEN_SYSCTL_HWP_SET_MINIMUM;
+        }
+        else if ( strncasecmp(param, "max", 3) == 0 )
+        {
+            set_hwp->maximum = val;
+            set_hwp->set_params |= XEN_SYSCTL_HWP_SET_MAXIMUM;
+        }
+        else if ( strncasecmp(param, "des", 3) == 0 )
+        {
+            set_hwp->desired = val;
+            set_hwp->set_params |= XEN_SYSCTL_HWP_SET_DESIRED;
+        }
+        else if ( strncasecmp(param, "ene", 3) == 0 )
+        {
+            set_hwp->energy_perf = val;
+            set_hwp->set_params |= XEN_SYSCTL_HWP_SET_ENERGY_PERF;
+        }
+        else
+        {
+            fprintf(stderr, "%s is an invalid parameter\n.", param);
+            return -1;
+        }
+
+        free(param);
+    }
+
+    return 0;
+}
+
+static void hwp_set_func(int argc, char *argv[])
+{
+    xc_set_hwp_para_t set_hwp = {};
+    int cpuid = -1;
+    int i = 0;
+
+    if ( parse_hwp_opts(&set_hwp, &cpuid, argc, argv) )
+    {
+        fprintf(stderr, "Missing, excess, or invalid argument(s)\n");
+        exit(EINVAL);
+    }
+
+    if ( cpuid != -1 )
+    {
+        i = cpuid;
+        max_cpu_nr = i + 1;
+    }
+
+    for ( ; i < max_cpu_nr; i++ )
+        if ( xc_set_cpufreq_hwp(xc_handle, i, &set_hwp) )
+            fprintf(stderr, "[CPU%d] failed to set hwp params (%d - %s)\n",
+                    i, errno, strerror(errno));
+}
+
 struct {
     const char *name;
     void (*function)(int argc, char *argv[]);
@@ -1319,6 +1558,7 @@ struct {
     { "get-cpufreq-average", cpufreq_func },
     { "start", start_gather_func },
     { "get-cpufreq-para", cpufreq_para_func },
+    { "set-cpufreq-hwp", hwp_set_func },
     { "set-scaling-maxfreq", scaling_max_freq_func },
     { "set-scaling-minfreq", scaling_min_freq_func },
     { "set-scaling-governor", scaling_governor_func },
-- 
2.30.2




 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.