[ 0.000000] Linux version 5.10.0-1-amd64 (debian-kernel@xxxxxxxxxxxxxxxx) (gcc-10 (Debian 10.2.1-3) 10.2.1 20201224, GNU ld (GNU Binutils for Debian) 2.35.1) #1 SMP Debian 5.10.4-1 (2020-12-31) [ 0.000000] Command line: placeholder root=UUID=ffd2e44e-3eb7-4c4d-a028-dad7da03c831 ro loglevel=3 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x000000000009e800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000080061fff] usable [ 0.000000] Xen: [mem 0x00000000ba952000-0x00000000ba98afff] reserved [ 0.000000] Xen: [mem 0x00000000babc3000-0x00000000bb1bffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bb1c0000-0x00000000bb842fff] reserved [ 0.000000] Xen: [mem 0x00000000bb844000-0x00000000bb8c9fff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bbd0f000-0x00000000bbff3fff] reserved [ 0.000000] Xen: [mem 0x00000000d0000000-0x00000000dfffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec01fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./Intel X79, BIOS 4.6.5 07/17/2019 [ 0.000000] Hypervisor detected: Xen PV [ 0.046803] tsc: Fast TSC calibration using PIT [ 0.046805] tsc: Detected 2494.279 MHz processor [ 0.046806] tsc: Detected 2494.340 MHz TSC [ 0.052290] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.052293] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.052298] last_pfn = 0x80062 max_arch_pfn = 0x400000000 [ 0.052299] Disabled [ 0.052300] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.052306] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.067090] Kernel/User page tables isolation: disabled on XEN PV. [ 0.679640] RAMDISK: [mem 0x04000000-0x061f4fff] [ 0.679653] ACPI: Early table checksum verification disabled [ 0.685907] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA) [ 0.685918] ACPI: XSDT 0x00000000BB0DD070 00005C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.685945] ACPI: FACP 0x00000000BB0E5728 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.686010] ACPI: DSDT 0x00000000BB0DD160 0085C7 (v02 ALASKA A M I 00000020 INTL 20051117) [ 0.686025] ACPI: FACS 0x00000000BB1B7F80 000040 [ 0.686039] ACPI: APIC 0x00000000BB0E5838 0001A8 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.686053] ACPI: FPDT 0x00000000BB0E59E0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.686068] ACPI: MCFG 0x00000000BB0E5A28 00003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097) [ 0.686082] ACPI: HPET 0x00000000BB0E5A68 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.686097] ACPI: SSDT 0x00000000BB0E5AA0 0CD380 (v02 INTEL CpuPm 00004000 INTL 20051117) [ 0.686112] ACPI: RMAD 0x00000000BB1B2E20 0000EC (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.686151] ACPI: Local APIC address 0xfee00000 [ 0.686152] Setting APIC routing to Xen PV. [ 0.686185] NUMA turned off [ 0.686187] Faking a node at [mem 0x0000000000000000-0x0000000080061fff] [ 0.686199] NODE_DATA(0) allocated [mem 0x3fbf7000-0x3fc20fff] [ 0.699249] Zone ranges: [ 0.699251] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.699253] DMA32 [mem 0x0000000001000000-0x0000000080061fff] [ 0.699254] Normal empty [ 0.699255] Device empty [ 0.699257] Movable zone start for each node [ 0.699260] Early memory node ranges [ 0.699261] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.699262] node 0: [mem 0x0000000000100000-0x0000000080061fff] [ 0.699587] Zeroed struct page in unavailable ranges: 32769 pages [ 0.699589] Initmem setup node 0 [mem 0x0000000000001000-0x0000000080061fff] [ 0.699590] On node 0 totalpages: 524287 [ 0.699592] DMA zone: 64 pages used for memmap [ 0.699592] DMA zone: 21 pages reserved [ 0.699593] DMA zone: 3997 pages, LIFO batch:0 [ 0.699644] DMA32 zone: 8130 pages used for memmap [ 0.699645] DMA32 zone: 520290 pages, LIFO batch:63 [ 0.700375] p2m virtual area at (____ptrval____), size is 40000000 [ 0.998178] Remapped 98 page(s) [ 1.000267] ACPI: PM-Timer IO Port: 0x408 [ 1.000274] ACPI: Local APIC address 0xfee00000 [ 1.000347] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 1.000349] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 1.000350] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 1.000352] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 1.000353] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 1.000354] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 1.000356] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 1.000357] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 1.000359] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 1.000360] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1]) [ 1.000362] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1]) [ 1.000363] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1]) [ 1.000365] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 1.000366] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 1.000367] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 1.000369] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 1.000370] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 1.000372] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 1.000373] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 1.000374] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 1.000376] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1]) [ 1.000377] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1]) [ 1.000379] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1]) [ 1.000380] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1]) [ 1.000409] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 1.000422] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 1.000440] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 1.000443] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 1.000452] ACPI: IRQ0 used by override. [ 1.000453] ACPI: IRQ9 used by override. [ 1.000469] Using ACPI (MADT) for SMP configuration information [ 1.000475] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 1.000483] smpboot: Allowing 24 CPUs, 0 hotplug CPUs [ 1.000503] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 1.000505] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 1.000505] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 1.000507] [mem 0x80062000-0xba951fff] available for PCI devices [ 1.000510] Booting paravirtualized kernel on Xen [ 1.000511] Xen version: 4.11.4 (preserve-AD) [ 1.000515] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 1.005077] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:24 nr_cpu_ids:24 nr_node_ids:1 [ 1.005897] percpu: Embedded 54 pages/cpu s183960 r8192 d29032 u262144 [ 1.005904] pcpu-alloc: s183960 r8192 d29032 u262144 alloc=1*2097152 [ 1.005906] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 1.005916] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [ 1.005986] xen: PV spinlocks enabled [ 1.005991] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.005995] Built 1 zonelists, mobility grouping on. Total pages: 516072 [ 1.005996] Policy zone: DMA32 [ 1.005998] Kernel command line: placeholder root=UUID=ffd2e44e-3eb7-4c4d-a028-dad7da03c831 ro loglevel=3 [ 1.006202] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 1.006283] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.006789] mem auto-init: stack:off, heap alloc:on, heap free:off [ 1.051558] software IO TLB: mapped [mem 0x0000000038c00000-0x000000003cc00000] (64MB) [ 1.072057] Memory: 197808K/2097148K available (12295K kernel code, 2540K rwdata, 4060K rodata, 2380K init, 1692K bss, 1229692K reserved, 0K cma-reserved) [ 1.072065] random: get_random_u64 called from __kmem_cache_create+0x2e/0x550 with crng_init=0 [ 1.072368] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 1.073305] ftrace: allocating 35988 entries in 141 pages [ 1.086924] ftrace: allocated 141 pages with 4 groups [ 1.087335] rcu: Hierarchical RCU implementation. [ 1.087337] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 1.087338] Rude variant of Tasks RCU enabled. [ 1.087339] Tracing variant of Tasks RCU enabled. [ 1.087340] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 1.087341] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 1.098325] Using NULL legacy PIC [ 1.098326] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 0 [ 1.098391] xen:events: Using FIFO-based ABI [ 1.098424] xen: --> pirq=1 -> irq=1 (gsi=1) [ 1.098439] xen: --> pirq=2 -> irq=2 (gsi=2) [ 1.098453] xen: --> pirq=3 -> irq=3 (gsi=3) [ 1.098467] xen: --> pirq=4 -> irq=4 (gsi=4) [ 1.098480] xen: --> pirq=5 -> irq=5 (gsi=5) [ 1.098494] xen: --> pirq=6 -> irq=6 (gsi=6) [ 1.098508] xen: --> pirq=7 -> irq=7 (gsi=7) [ 1.098521] xen: --> pirq=8 -> irq=8 (gsi=8) [ 1.098536] xen: --> pirq=9 -> irq=9 (gsi=9) [ 1.098550] xen: --> pirq=10 -> irq=10 (gsi=10) [ 1.098565] xen: --> pirq=11 -> irq=11 (gsi=11) [ 1.098579] xen: --> pirq=12 -> irq=12 (gsi=12) [ 1.098593] xen: --> pirq=13 -> irq=13 (gsi=13) [ 1.098607] xen: --> pirq=14 -> irq=14 (gsi=14) [ 1.098621] xen: --> pirq=15 -> irq=15 (gsi=15) [ 1.098667] random: crng done (trusting CPU's manufacturer) [ 1.103635] Console: colour VGA+ 80x25 [ 1.103647] printk: console [tty0] enabled [ 1.103658] printk: console [hvc0] enabled [ 1.103686] ACPI: Core revision 20200925 [ 1.176998] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 1.177010] Xen: using vcpuop timer interface [ 1.177015] installing Xen timer for CPU 0 [ 1.177055] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f45725f32, max_idle_ns: 440795273770 ns [ 1.177058] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.68 BogoMIPS (lpj=9977360) [ 1.177061] pid_max: default: 32768 minimum: 301 [ 1.177155] LSM: Security Framework initializing [ 1.177182] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.177277] AppArmor: AppArmor initialized [ 1.177283] TOMOYO Linux initialized [ 1.177330] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.177335] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.178102] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.178104] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.178108] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.178109] Spectre V2 : Mitigation: Full generic retpoline [ 1.178110] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.178111] Speculative Store Bypass: Vulnerable [ 1.178113] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 1.178253] Freeing SMP alternatives memory: 32K [ 1.181187] cpu 0 spinlock event irq 49 [ 1.181194] VPMU disabled by hypervisor. [ 1.181588] Performance Events: unsupported p6 CPU model 62 no PMU driver, software events only. [ 1.181693] rcu: Hierarchical SRCU implementation. [ 1.182169] NMI watchdog: Perf NMI watchdog permanently disabled [ 1.182321] smp: Bringing up secondary CPUs ... [ 1.182590] installing Xen timer for CPU 1 [ 1.182960] cpu 1 spinlock event irq 59 [ 1.182960] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 1.182960] installing Xen timer for CPU 2 [ 1.182960] cpu 2 spinlock event irq 65 [ 1.182960] installing Xen timer for CPU 3 [ 1.182960] cpu 3 spinlock event irq 71 [ 1.182960] smp: Brought up 1 node, 4 CPUs [ 1.182960] smpboot: Max logical packages: 6 [ 1.186776] node 0 deferred pages initialised in 0ms [ 1.186814] devtmpfs: initialized [ 1.186814] x86/mm: Memory block size: 128MB [ 1.186814] PM: Registering ACPI NVS region [mem 0xbabc3000-0xbb1bffff] (6279168 bytes) [ 1.186814] PM: Registering ACPI NVS region [mem 0xbb844000-0xbb8c9fff] (548864 bytes) [ 1.186814] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.186814] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.186814] pinctrl core: initialized pinctrl subsystem [ 1.186814] NET: Registered protocol family 16 [ 1.186814] xen:grant_table: Grant tables using version 1 layout [ 1.186814] Grant table initialized [ 1.186814] audit: initializing netlink subsys (disabled) [ 1.186814] audit: type=2000 audit(1612192794.947:1): state=initialized audit_enabled=0 res=1 [ 1.186814] thermal_sys: Registered thermal governor 'fair_share' [ 1.186814] thermal_sys: Registered thermal governor 'bang_bang' [ 1.186814] thermal_sys: Registered thermal governor 'step_wise' [ 1.186814] thermal_sys: Registered thermal governor 'user_space' [ 1.186814] ACPI: bus type PCI registered [ 1.186814] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.186814] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xd0000000-0xdfffffff] (base 0xd0000000) [ 1.186814] PCI: MMCONFIG at [mem 0xd0000000-0xdfffffff] reserved in E820 [ 1.277591] PCI: Using configuration type 1 for base access [ 1.461249] ACPI: Added _OSI(Module Device) [ 1.461251] ACPI: Added _OSI(Processor Device) [ 1.461252] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.461254] ACPI: Added _OSI(Processor Aggregator Device) [ 1.461255] ACPI: Added _OSI(Linux-Dell-Video) [ 1.461257] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 1.461259] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 1.629408] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.643731] xen: registering gsi 9 triggering 0 polarity 0 [ 1.649095] ACPI: Interpreter enabled [ 1.649108] ACPI: (supports S0 S5) [ 1.649110] ACPI: Using IOAPIC for interrupt routing [ 1.649149] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.649719] ACPI: Enabled 6 GPEs in block 00 to 3F [ 1.668271] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.668277] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.668501] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.668707] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.669273] PCI host bridge to bus 0000:00 [ 1.669276] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.669278] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.669279] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.669280] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.669282] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.669283] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 1.669284] pci_bus 0000:00: root bus resource [mem 0xcc000000-0xffffffff window] [ 1.669285] pci_bus 0000:00: root bus resource [mem 0x440000000-0x3fffffffffff window] [ 1.669287] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.669344] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.669625] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.669877] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.670228] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.670510] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.670860] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.671159] pci 0000:00:02.0: [8086:0e04] type 01 class 0x060400 [ 1.671509] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 1.671780] pci 0000:00:02.1: [8086:0e05] type 01 class 0x060400 [ 1.672130] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold [ 1.672401] pci 0000:00:02.2: [8086:0e06] type 01 class 0x060400 [ 1.672751] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 1.673021] pci 0000:00:02.3: [8086:0e07] type 01 class 0x060400 [ 1.673373] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold [ 1.673662] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.673833] pci 0000:00:03.0: enabling Extended Tags [ 1.674041] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.674317] pci 0000:00:03.1: [8086:0e09] type 01 class 0x060400 [ 1.674666] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold [ 1.674935] pci 0000:00:03.2: [8086:0e0a] type 01 class 0x060400 [ 1.675285] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 1.675553] pci 0000:00:03.3: [8086:0e0b] type 01 class 0x060400 [ 1.675903] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 1.676173] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 1.676598] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 1.677021] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 1.677086] pci 0000:00:05.4: reg 0x10: [mem 0xfb304000-0xfb304fff] [ 1.677562] pci 0000:00:06.0: [8086:0e10] type 00 class 0x088000 [ 1.678000] pci 0000:00:06.1: [8086:0e11] type 00 class 0x088000 [ 1.678420] pci 0000:00:06.2: [8086:0e12] type 00 class 0x088000 [ 1.678839] pci 0000:00:06.3: [8086:0e13] type 00 class 0x088000 [ 1.679256] pci 0000:00:06.4: [8086:0e14] type 00 class 0x088000 [ 1.679673] pci 0000:00:06.5: [8086:0e15] type 00 class 0x088000 [ 1.680090] pci 0000:00:06.6: [8086:0e16] type 00 class 0x088000 [ 1.680506] pci 0000:00:06.7: [8086:0e17] type 00 class 0x088000 [ 1.680923] pci 0000:00:07.0: [8086:0e18] type 00 class 0x088000 [ 1.681353] pci 0000:00:07.1: [8086:0e19] type 00 class 0x088000 [ 1.681777] pci 0000:00:07.2: [8086:0e1a] type 00 class 0x088000 [ 1.682198] pci 0000:00:07.3: [8086:0e1b] type 00 class 0x088000 [ 1.682616] pci 0000:00:07.4: [8086:0e1c] type 00 class 0x088000 [ 1.683140] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 1.683198] pci 0000:00:1a.0: reg 0x10: [mem 0xfb302000-0xfb3023ff] [ 1.683513] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.683723] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 1.684072] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.684144] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 1.684151] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 1.684348] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 1.684698] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.684767] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 1.684773] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 1.684974] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400 [ 1.685325] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 1.685395] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 1.685402] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 1.685623] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 1.685681] pci 0000:00:1d.0: reg 0x10: [mem 0xfb301000-0xfb3013ff] [ 1.686003] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.686202] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 1.686600] pci 0000:00:1f.0: [8086:1e48] type 00 class 0x060100 [ 1.687125] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 1.687181] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 1.687211] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 1.687241] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 1.687271] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 1.687301] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 1.687331] pci 0000:00:1f.2: reg 0x24: [mem 0xfb300000-0xfb3007ff] [ 1.687514] pci 0000:00:1f.2: PME# supported from D3hot [ 1.687697] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 1.687768] pci 0000:00:1f.3: reg 0x10: [mem 0x3ffffff00000-0x3ffffff000ff 64bit] [ 1.687854] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 1.688194] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.688356] pci 0000:00:01.1: PCI bridge to [bus 02] [ 1.688560] pci 0000:03:00.0: [10de:01d3] type 00 class 0x030000 [ 1.688612] pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 1.688655] pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 1.688698] pci 0000:03:00.0: reg 0x1c: [mem 0xf9000000-0xf9ffffff 64bit] [ 1.688752] pci 0000:03:00.0: reg 0x30: [mem 0xfb000000-0xfb01ffff pref] [ 1.689032] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.689057] pci 0000:00:02.0: PCI bridge to [bus 03] [ 1.689081] pci 0000:00:02.0: bridge window [mem 0xf9000000-0xfb0fffff] [ 1.689099] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 1.689233] pci 0000:00:02.1: PCI bridge to [bus 04] [ 1.689394] pci 0000:00:02.2: PCI bridge to [bus 05] [ 1.689556] pci 0000:00:02.3: PCI bridge to [bus 06] [ 1.689723] pci 0000:00:03.0: PCI bridge to [bus 07] [ 1.689892] pci 0000:00:03.1: PCI bridge to [bus 08] [ 1.690056] pci 0000:00:03.2: PCI bridge to [bus 09] [ 1.690218] pci 0000:00:03.3: PCI bridge to [bus 0a] [ 1.690377] pci 0000:00:1c.0: PCI bridge to [bus 0b] [ 1.690588] pci 0000:0c:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.690670] pci 0000:0c:00.0: reg 0x10: [mem 0xfb200000-0xfb200fff 64bit] [ 1.691033] pci 0000:0c:00.0: PME# supported from D0 D3cold [ 1.691224] pci 0000:00:1c.1: PCI bridge to [bus 0c] [ 1.691243] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 1.691452] pci 0000:0d:00.0: [10ec:8168] type 00 class 0x020000 [ 1.691518] pci 0000:0d:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 1.691609] pci 0000:0d:00.0: reg 0x18: [mem 0xfb104000-0xfb104fff 64bit] [ 1.691664] pci 0000:0d:00.0: reg 0x20: [mem 0xfb100000-0xfb103fff 64bit] [ 1.691996] pci 0000:0d:00.0: supports D1 D2 [ 1.691997] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.692262] pci 0000:00:1c.4: PCI bridge to [bus 0d] [ 1.692273] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 1.692283] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 1.692369] pci_bus 0000:0e: extended config space not accessible [ 1.692529] pci 0000:00:1e.0: PCI bridge to [bus 0e] (subtractive decode) [ 1.692563] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 1.692565] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 1.692566] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 1.692567] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 1.692568] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 1.692569] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 1.692571] pci 0000:00:1e.0: bridge window [mem 0xcc000000-0xffffffff window] (subtractive decode) [ 1.692572] pci 0000:00:1e.0: bridge window [mem 0x440000000-0x3fffffffffff window] (subtractive decode) [ 1.693122] xen: registering gsi 13 triggering 1 polarity 0 [ 1.693350] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 1.693354] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.693379] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 1.693442] PCI host bridge to bus 0000:ff [ 1.693444] pci_bus 0000:ff: root bus resource [bus ff] [ 1.693503] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 1.693757] pci 0000:ff:08.2: [8086:0e32] type 00 class 0x110100 [ 1.694024] pci 0000:ff:08.3: [8086:0e83] type 00 class 0x088000 [ 1.694363] pci 0000:ff:08.4: [8086:0e84] type 00 class 0x088000 [ 1.694709] pci 0000:ff:08.5: [8086:0e85] type 00 class 0x088000 [ 1.695045] pci 0000:ff:08.6: [8086:0e86] type 00 class 0x088000 [ 1.695383] pci 0000:ff:08.7: [8086:0e87] type 00 class 0x088000 [ 1.695712] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 1.695960] pci 0000:ff:09.2: [8086:0e33] type 00 class 0x110100 [ 1.696216] pci 0000:ff:09.3: [8086:0e93] type 00 class 0x088000 [ 1.696553] pci 0000:ff:09.4: [8086:0e94] type 00 class 0x088000 [ 1.696898] pci 0000:ff:09.5: [8086:0e95] type 00 class 0x088000 [ 1.697239] pci 0000:ff:09.6: [8086:0e96] type 00 class 0x088000 [ 1.697563] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 1.697810] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 1.698047] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 1.698296] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 1.698547] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 1.698786] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 1.699033] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 1.699266] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 1.699503] pci 0000:ff:0c.2: [8086:0ee4] type 00 class 0x088000 [ 1.699736] pci 0000:ff:0c.3: [8086:0ee6] type 00 class 0x088000 [ 1.699969] pci 0000:ff:0c.4: [8086:0ee8] type 00 class 0x088000 [ 1.700206] pci 0000:ff:0c.5: [8086:0eea] type 00 class 0x088000 [ 1.700447] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 1.700680] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 1.700914] pci 0000:ff:0d.2: [8086:0ee5] type 00 class 0x088000 [ 1.701113] pci 0000:ff:0d.3: [8086:0ee7] type 00 class 0x088000 [ 1.701348] pci 0000:ff:0d.4: [8086:0ee9] type 00 class 0x088000 [ 1.701581] pci 0000:ff:0d.5: [8086:0eeb] type 00 class 0x088000 [ 1.701835] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 1.702078] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 1.702360] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 1.702694] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 1.703029] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 1.703362] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 1.703695] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 1.704028] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 1.704369] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 1.704707] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 1.705043] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 1.705380] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 1.705719] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 1.706059] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 1.706393] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 1.706726] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 1.707054] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 1.707293] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 1.707538] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 1.707773] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 1.708027] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 1.708261] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 1.708493] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 1.708777] pci 0000:ff:1c.0: [8086:0e60] type 00 class 0x088000 [ 1.709016] pci 0000:ff:1c.1: [8086:0e38] type 00 class 0x110100 [ 1.709311] pci 0000:ff:1d.0: [8086:0e68] type 00 class 0x088000 [ 1.709646] pci 0000:ff:1d.1: [8086:0e79] type 00 class 0x088000 [ 1.709991] pci 0000:ff:1d.2: [8086:0e6a] type 00 class 0x088000 [ 1.710327] pci 0000:ff:1d.3: [8086:0e6b] type 00 class 0x088000 [ 1.710660] pci 0000:ff:1d.4: [8086:0e6c] type 00 class 0x088000 [ 1.710999] pci 0000:ff:1d.5: [8086:0e6d] type 00 class 0x088000 [ 1.711346] pci 0000:ff:1e.0: [8086:0ef0] type 00 class 0x088000 [ 1.711680] pci 0000:ff:1e.1: [8086:0ef1] type 00 class 0x088000 [ 1.712019] pci 0000:ff:1e.2: [8086:0ef2] type 00 class 0x088000 [ 1.712353] pci 0000:ff:1e.3: [8086:0ef3] type 00 class 0x088000 [ 1.712687] pci 0000:ff:1e.4: [8086:0ef4] type 00 class 0x088000 [ 1.713026] pci 0000:ff:1e.5: [8086:0ef5] type 00 class 0x088000 [ 1.713369] pci 0000:ff:1e.6: [8086:0ef6] type 00 class 0x088000 [ 1.713703] pci 0000:ff:1e.7: [8086:0ef7] type 00 class 0x088000 [ 1.714175] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 1.714261] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 1.714345] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.714428] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15) [ 1.714511] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 1.714594] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 1.714677] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 1.714760] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 1.717118] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 4/0x1 ignored. [ 1.717118] ACPI: Unable to map lapic to logical cpu number [ 1.717243] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 5/0x3 ignored. [ 1.717244] ACPI: Unable to map lapic to logical cpu number [ 1.717392] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 6/0x5 ignored. [ 1.717393] ACPI: Unable to map lapic to logical cpu number [ 1.717540] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 7/0x7 ignored. [ 1.717540] ACPI: Unable to map lapic to logical cpu number [ 1.717630] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 8/0x8 ignored. [ 1.717631] ACPI: Unable to map lapic to logical cpu number [ 1.717724] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 9/0x9 ignored. [ 1.717725] ACPI: Unable to map lapic to logical cpu number [ 1.717815] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 10/0xa ignored. [ 1.717816] ACPI: Unable to map lapic to logical cpu number [ 1.717910] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 11/0xb ignored. [ 1.717910] ACPI: Unable to map lapic to logical cpu number [ 1.718005] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 12/0x10 ignored. [ 1.718006] ACPI: Unable to map lapic to logical cpu number [ 1.718100] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 13/0x11 ignored. [ 1.718101] ACPI: Unable to map lapic to logical cpu number [ 1.718192] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 14/0x12 ignored. [ 1.718193] ACPI: Unable to map lapic to logical cpu number [ 1.718288] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 15/0x13 ignored. [ 1.718289] ACPI: Unable to map lapic to logical cpu number [ 1.718380] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 16/0x14 ignored. [ 1.718381] ACPI: Unable to map lapic to logical cpu number [ 1.718475] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 17/0x15 ignored. [ 1.718476] ACPI: Unable to map lapic to logical cpu number [ 1.718567] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 18/0x16 ignored. [ 1.718567] ACPI: Unable to map lapic to logical cpu number [ 1.718662] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 19/0x17 ignored. [ 1.718663] ACPI: Unable to map lapic to logical cpu number [ 1.718754] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 20/0x18 ignored. [ 1.718755] ACPI: Unable to map lapic to logical cpu number [ 1.718850] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 21/0x19 ignored. [ 1.718851] ACPI: Unable to map lapic to logical cpu number [ 1.718943] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 22/0x1a ignored. [ 1.718944] ACPI: Unable to map lapic to logical cpu number [ 1.719057] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 23/0x1b ignored. [ 1.719058] ACPI: Unable to map lapic to logical cpu number [ 1.719564] xen:balloon: Initialising balloon driver [ 1.719564] iommu: Default domain type: Translated [ 1.721106] pci 0000:03:00.0: vgaarb: setting as boot VGA device [ 1.721106] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.721107] pci 0000:03:00.0: vgaarb: bridge control possible [ 1.721108] vgaarb: loaded [ 1.721199] EDAC MC: Ver: 3.0.0 [ 1.722173] NetLabel: Initializing [ 1.722173] NetLabel: domain hash size = 128 [ 1.722173] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.722173] NetLabel: unlabeled traffic allowed by default [ 1.722173] PCI: Using ACPI for IRQ routing [ 1.750682] PCI: pci_cache_line_size set to 64 bytes [ 1.751527] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 1.751529] e820: reserve RAM buffer [mem 0x80062000-0x83ffffff] [ 1.753064] clocksource: Switched to clocksource tsc-early [ 1.764675] VFS: Disk quotas dquot_6.6.0 [ 1.764692] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.764713] hugetlbfs: disabling because there are no supported hugepage sizes [ 1.764806] AppArmor: AppArmor Filesystem Enabled [ 1.764823] pnp: PnP ACPI init [ 1.764972] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 1.764974] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 1.764975] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 1.764976] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 1.764978] system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved [ 1.764979] system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved [ 1.764981] system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved [ 1.764987] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.765134] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 1.765139] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.765369] system 00:02: [io 0x0a00-0x0a1f] has been reserved [ 1.765370] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 1.765372] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 1.765376] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.765405] xen: registering gsi 1 triggering 1 polarity 0 [ 1.765450] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 1.765487] xen: registering gsi 12 triggering 1 polarity 0 [ 1.765528] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 1.765556] xen: registering gsi 8 triggering 1 polarity 0 [ 1.765591] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.765686] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 1.765691] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.765967] system 00:07: [io 0x0400-0x0453] has been reserved [ 1.765969] system 00:07: [io 0x0458-0x047f] has been reserved [ 1.765970] system 00:07: [io 0x1180-0x119f] has been reserved [ 1.765972] system 00:07: [io 0x0500-0x057f] has been reserved [ 1.765974] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.765975] system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved [ 1.765977] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 1.765981] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.766096] system 00:08: [io 0x0454-0x0457] has been reserved [ 1.766101] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 1.766562] pnp: PnP ACPI: found 9 devices [ 1.785356] PM-Timer failed consistency check (0xffffff) - aborting. [ 1.785419] NET: Registered protocol family 2 [ 1.785595] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 1.785614] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.785663] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 1.785685] TCP: Hash tables configured (established 16384 bind 16384) [ 1.785724] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 1.785734] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 1.785919] NET: Registered protocol family 1 [ 1.785924] NET: Registered protocol family 44 [ 1.785952] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.785991] pci 0000:00:01.1: PCI bridge to [bus 02] [ 1.786029] pci 0000:00:02.0: PCI bridge to [bus 03] [ 1.786043] pci 0000:00:02.0: bridge window [mem 0xf9000000-0xfb0fffff] [ 1.786053] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 1.786071] pci 0000:00:02.1: PCI bridge to [bus 04] [ 1.786108] pci 0000:00:02.2: PCI bridge to [bus 05] [ 1.786145] pci 0000:00:02.3: PCI bridge to [bus 06] [ 1.786183] pci 0000:00:03.0: PCI bridge to [bus 07] [ 1.786220] pci 0000:00:03.1: PCI bridge to [bus 08] [ 1.786257] pci 0000:00:03.2: PCI bridge to [bus 09] [ 1.786294] pci 0000:00:03.3: PCI bridge to [bus 0a] [ 1.786332] pci 0000:00:1c.0: PCI bridge to [bus 0b] [ 1.786371] pci 0000:00:1c.1: PCI bridge to [bus 0c] [ 1.786385] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 1.786412] pci 0000:00:1c.4: PCI bridge to [bus 0d] [ 1.786418] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 1.786432] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 1.786458] pci 0000:00:1e.0: PCI bridge to [bus 0e] [ 1.786497] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 1.786498] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 1.786499] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 1.786501] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 1.786502] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 1.786503] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 1.786504] pci_bus 0000:00: resource 10 [mem 0xcc000000-0xffffffff window] [ 1.786505] pci_bus 0000:00: resource 11 [mem 0x440000000-0x3fffffffffff window] [ 1.786507] pci_bus 0000:03: resource 1 [mem 0xf9000000-0xfb0fffff] [ 1.786508] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 1.786510] pci_bus 0000:0c: resource 1 [mem 0xfb200000-0xfb2fffff] [ 1.786511] pci_bus 0000:0d: resource 0 [io 0xe000-0xefff] [ 1.786513] pci_bus 0000:0d: resource 1 [mem 0xfb100000-0xfb1fffff] [ 1.786514] pci_bus 0000:0e: resource 4 [io 0x0000-0x03af window] [ 1.786515] pci_bus 0000:0e: resource 5 [io 0x03e0-0x0cf7 window] [ 1.786516] pci_bus 0000:0e: resource 6 [io 0x03b0-0x03df window] [ 1.786517] pci_bus 0000:0e: resource 7 [io 0x0d00-0xffff window] [ 1.786518] pci_bus 0000:0e: resource 8 [mem 0x000a0000-0x000bffff window] [ 1.786519] pci_bus 0000:0e: resource 9 [mem 0x000c0000-0x000dffff window] [ 1.786521] pci_bus 0000:0e: resource 10 [mem 0xcc000000-0xffffffff window] [ 1.786522] pci_bus 0000:0e: resource 11 [mem 0x440000000-0x3fffffffffff window] [ 1.786652] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 1.786824] xen: registering gsi 16 triggering 0 polarity 1 [ 1.786848] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.787085] xen: registering gsi 23 triggering 0 polarity 1 [ 1.787103] xen: --> pirq=23 -> irq=23 (gsi=23) [ 1.787304] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.787386] xen: registering gsi 16 triggering 0 polarity 1 [ 1.787390] Already setup the GSI :16 [ 1.787432] xen: registering gsi 17 triggering 0 polarity 1 [ 1.787448] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.787894] PCI: CLS 64 bytes, default 64 [ 1.787945] Trying to unpack rootfs image as initramfs... [ 2.320780] Freeing initrd memory: 34772K [ 2.320830] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45725f32, max_idle_ns: 440795273770 ns [ 2.320914] clocksource: Switched to clocksource tsc [ 2.321505] Initialise system trusted keyrings [ 2.321517] Key type blacklist registered [ 2.321665] workingset: timestamp_bits=36 max_order=18 bucket_order=0 [ 2.322761] zbud: loaded [ 2.323218] integrity: Platform Keyring initialized [ 2.323221] Key type asymmetric registered [ 2.323223] Asymmetric key parser 'x509' registered [ 2.323233] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.323389] io scheduler mq-deadline registered [ 2.323720] xen: registering gsi 26 triggering 0 polarity 1 [ 2.323748] xen: --> pirq=26 -> irq=26 (gsi=26) [ 2.324290] xen: registering gsi 26 triggering 0 polarity 1 [ 2.324295] Already setup the GSI :26 [ 2.324791] xen: registering gsi 32 triggering 0 polarity 1 [ 2.324809] xen: --> pirq=32 -> irq=32 (gsi=32) [ 2.325297] xen: registering gsi 32 triggering 0 polarity 1 [ 2.325302] Already setup the GSI :32 [ 2.325789] xen: registering gsi 32 triggering 0 polarity 1 [ 2.325793] Already setup the GSI :32 [ 2.326277] xen: registering gsi 32 triggering 0 polarity 1 [ 2.326282] Already setup the GSI :32 [ 2.326766] xen: registering gsi 40 triggering 0 polarity 1 [ 2.326784] xen: --> pirq=40 -> irq=40 (gsi=40) [ 2.327285] xen: registering gsi 40 triggering 0 polarity 1 [ 2.327289] Already setup the GSI :40 [ 2.327768] xen: registering gsi 40 triggering 0 polarity 1 [ 2.327773] Already setup the GSI :40 [ 2.328262] xen: registering gsi 40 triggering 0 polarity 1 [ 2.328267] Already setup the GSI :40 [ 2.328756] xen: registering gsi 17 triggering 0 polarity 1 [ 2.328760] Already setup the GSI :17 [ 2.329432] xen: registering gsi 17 triggering 0 polarity 1 [ 2.329437] Already setup the GSI :17 [ 2.329799] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.329811] intel_idle: MWAIT substates: 0x1120 [ 2.329991] Monitor-Mwait will be used to enter C-1 state [ 2.330020] ACPI: \_SB_.SCK0.C000: Found 1 idle states [ 2.330022] intel_idle: v0.5.1 model 0x3E [ 2.330027] intel_idle: intel_idle yielding to none [ 2.330197] ACPI: \_SB_.SCK0.C000: Found 1 idle states [ 2.330520] ACPI: \_SB_.SCK0.C002: Found 1 idle states [ 2.330833] ACPI: \_SB_.SCK0.C004: Found 1 idle states [ 2.331136] ACPI: \_SB_.SCK0.C006: Found 1 idle states [ 2.331791] xen_mcelog: /dev/mcelog registered by Xen [ 2.332369] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.333094] hpet_acpi_add: no address or irqs in _CRS [ 2.333117] Linux agpgart interface v0.103 [ 2.333215] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel [ 2.333216] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 2.333618] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 2.334259] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.334265] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.334468] mousedev: PS/2 mouse device common for all mice [ 2.334546] rtc_cmos 00:05: RTC can wake from S4 [ 2.334912] rtc_cmos 00:05: registered as rtc0 [ 2.334989] rtc_cmos 00:05: setting system clock to 2021-02-01T15:19:56 UTC (1612192796) [ 2.335014] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram [ 2.335023] intel_pstate: CPU model not supported [ 2.335146] ledtrig-cpu: registered to indicate activity on CPUs [ 2.335905] NET: Registered protocol family 10 [ 2.356778] Segment Routing with IPv6 [ 2.356803] mip6: Mobile IPv6 [ 2.356806] NET: Registered protocol family 17 [ 2.356919] mpls_gso: MPLS GSO support [ 2.357218] IPI shorthand broadcast: enabled [ 2.357226] sched_clock: Marking stable (2278760525, 78422631)->(2371388831, -14205675) [ 2.357516] registered taskstats version 1 [ 2.357519] Loading compiled-in X.509 certificates [ 2.397333] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 2.397353] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9' [ 2.397390] zswap: loaded using pool lzo/zbud [ 2.397798] Key type ._fscrypt registered [ 2.397799] Key type .fscrypt registered [ 2.397800] Key type fscrypt-provisioning registered [ 2.397846] AppArmor: AppArmor sha1 policy hashing enabled [ 2.400414] Freeing unused kernel image (initmem) memory: 2380K [ 2.433151] Write protecting the kernel read-only data: 18432k [ 2.447246] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 2.447317] Freeing unused kernel image (rodata/data gap) memory: 36K [ 2.899184] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.899192] Run /init as init process [ 2.899194] with arguments: [ 2.899194] /init [ 2.899195] placeholder [ 2.899196] with environment: [ 2.899197] HOME=/ [ 2.899198] TERM=linux [ 3.185964] xen: registering gsi 18 triggering 0 polarity 1 [ 3.185997] xen: --> pirq=18 -> irq=18 (gsi=18) [ 3.186159] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 3.186879] i2c i2c-0: 4/4 memory slots populated (from DMI) [ 3.222630] xen: registering gsi 16 triggering 0 polarity 1 [ 3.222636] Already setup the GSI :16 [ 3.231037] ACPI: bus type USB registered [ 3.231060] usbcore: registered new interface driver usbfs [ 3.231067] usbcore: registered new interface driver hub [ 3.231175] usbcore: registered new device driver usb [ 3.231587] SCSI subsystem initialized [ 3.243171] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.244707] ehci-pci: EHCI PCI platform driver [ 3.245048] xen: registering gsi 16 triggering 0 polarity 1 [ 3.245053] Already setup the GSI :16 [ 3.245182] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 3.245193] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.245228] ehci-pci 0000:00:1a.0: debug port 2 [ 3.249198] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 3.249493] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfb302000 [ 3.255840] libata version 3.00 loaded. [ 3.256544] libphy: r8169: probed [ 3.256787] r8169 0000:0d:00.0 eth0: RTL8168h/8111h, 00:e0:4c:0a:52:97, XID 541, IRQ 89 [ 3.256790] r8169 0000:0d:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 3.265121] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.265294] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 3.265297] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.265299] usb usb1: Product: EHCI Host Controller [ 3.265303] usb usb1: Manufacturer: Linux 5.10.0-1-amd64 ehci_hcd [ 3.265311] usb usb1: SerialNumber: 0000:00:1a.0 [ 3.265527] hub 1-0:1.0: USB hub found [ 3.266129] hub 1-0:1.0: 2 ports detected [ 3.266564] xen: registering gsi 23 triggering 0 polarity 1 [ 3.266570] Already setup the GSI :23 [ 3.266652] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.266661] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.266696] ehci-pci 0000:00:1d.0: debug port 2 [ 3.267375] xen: registering gsi 17 triggering 0 polarity 1 [ 3.267381] Already setup the GSI :17 [ 3.270651] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 3.271748] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb301000 [ 3.272531] ahci 0000:00:1f.2: version 3.0 [ 3.272652] xen: registering gsi 19 triggering 0 polarity 1 [ 3.272686] xen: --> pirq=19 -> irq=19 (gsi=19) [ 3.272897] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode [ 3.272901] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 3.285129] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.285289] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 3.285292] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.285294] usb usb2: Product: EHCI Host Controller [ 3.285296] usb usb2: Manufacturer: Linux 5.10.0-1-amd64 ehci_hcd [ 3.285297] usb usb2: SerialNumber: 0000:00:1d.0 [ 3.285512] hub 2-0:1.0: USB hub found [ 3.285538] hub 2-0:1.0: 2 ports detected [ 3.286219] xhci_hcd 0000:0c:00.0: xHCI Host Controller [ 3.286228] xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 3 [ 3.286520] xhci_hcd 0000:0c:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000890 [ 3.287292] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 3.287294] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.287296] usb usb3: Product: xHCI Host Controller [ 3.287298] usb usb3: Manufacturer: Linux 5.10.0-1-amd64 xhci-hcd [ 3.287300] usb usb3: SerialNumber: 0000:0c:00.0 [ 3.287695] hub 3-0:1.0: USB hub found [ 3.287726] hub 3-0:1.0: 1 port detected [ 3.288010] xhci_hcd 0000:0c:00.0: xHCI Host Controller [ 3.288016] xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 4 [ 3.288020] xhci_hcd 0000:0c:00.0: Host supports USB 3.0 SuperSpeed [ 3.288206] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 3.288209] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.288210] usb usb4: Product: xHCI Host Controller [ 3.288212] usb usb4: Manufacturer: Linux 5.10.0-1-amd64 xhci-hcd [ 3.288214] usb usb4: SerialNumber: 0000:0c:00.0 [ 3.288582] hub 4-0:1.0: USB hub found [ 3.288615] hub 4-0:1.0: 4 ports detected [ 3.289502] scsi host0: ahci [ 3.289864] scsi host1: ahci [ 3.292868] r8169 0000:0d:00.0 enp13s0: renamed from eth0 [ 3.296341] scsi host2: ahci [ 3.297158] scsi host3: ahci [ 3.297682] scsi host4: ahci [ 3.298147] scsi host5: ahci [ 3.298236] ata1: SATA max UDMA/133 abar m2048@0xfb300000 port 0xfb300100 irq 90 [ 3.298239] ata2: SATA max UDMA/133 abar m2048@0xfb300000 port 0xfb300180 irq 90 [ 3.298240] ata3: DUMMY [ 3.298241] ata4: DUMMY [ 3.298243] ata5: DUMMY [ 3.298244] ata6: DUMMY [ 3.601132] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.612129] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.612249] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.612427] ata1.00: ATA-11: KINGSTON SUV400S37120G, 0C3FD6SD, max UDMA/133 [ 3.612429] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.612963] ata1.00: configured for UDMA/133 [ 3.613122] scsi 0:0:0:0: Direct-Access ATA KINGSTON SUV400S D6SD PQ: 0 ANSI: 5 [ 3.621135] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 3.621139] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 3.628856] ata2.00: ATA-8: KINGSTON SV300S37A120G, 525ABBF0, max UDMA/133 [ 3.628859] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.650125] ata2.00: configured for UDMA/133 [ 3.650270] scsi 1:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5 [ 3.661147] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 3.661150] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.661179] sd 0:0:0:0: [sda] Write Protect is off [ 3.661182] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.661199] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 3.661226] sd 1:0:0:0: [sdb] Write Protect is off [ 3.661228] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.661238] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.661277] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.695557] sda: sda1 sda2 [ 3.696149] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.698510] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.761182] device-mapper: uevent: version 1.0.3 [ 3.761310] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@xxxxxxxxxx [ 3.769430] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 3.769433] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.769892] hub 1-1:1.0: USB hub found [ 3.770066] hub 1-1:1.0: 6 ports detected [ 3.770833] usb 3-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20 [ 3.770836] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.770838] usb 3-1: Product: USB2.0 Hub [ 3.771997] hub 3-1:1.0: USB hub found [ 3.772307] hub 3-1:1.0: 4 ports detected [ 3.781438] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 3.781441] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.781745] hub 2-1:1.0: USB hub found [ 3.781832] hub 2-1:1.0: 8 ports detected [ 3.915253] PM: Image not found (code -22) [ 4.065104] usb 1-1.2: new low-speed USB device number 3 using ehci-pci [ 4.073093] usb 2-1.4: new high-speed USB device number 3 using ehci-pci [ 4.083033] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.173983] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 4.187304] usb 1-1.2: New USB device found, idVendor=099a, idProduct=610c, bcdDevice= 0.01 [ 4.187307] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.187309] usb 1-1.2: Product: USB Multimedia Keyboard [ 4.187310] usb 1-1.2: Manufacturer: [ 4.192538] usb 2-1.4: New USB device found, idVendor=148f, idProduct=7601, bcdDevice= 0.00 [ 4.192540] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.192541] usb 2-1.4: Product: 802.11 n WLAN [ 4.192542] usb 2-1.4: Manufacturer: MediaTek [ 4.192543] usb 2-1.4: SerialNumber: 1.0 [ 4.264431] systemd[1]: Inserted module 'autofs4' [ 4.310242] systemd[1]: systemd 247.2-5 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.310522] systemd[1]: Detected architecture x86-64. [ 4.313124] systemd[1]: Set hostname to . [ 4.387063] systemd-sysv-generator[225]: SysV service '/etc/init.d/xen' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.402276] systemd-sysv-generator[225]: SysV service '/etc/init.d/exim4' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.402403] systemd-sysv-generator[225]: SysV service '/etc/init.d/xencommons' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.404976] systemd-sysv-generator[225]: SysV service '/etc/init.d/isc-dhcp-server' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.467049] systemd[1]: /lib/systemd/system/virtlogd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlogd-sock → /run/libvirt/virtlogd-sock; please update the unit file accordingly. [ 4.475984] systemd[1]: /lib/systemd/system/virtlogd-admin.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlogd-admin-sock → /run/libvirt/virtlogd-admin-sock; please update the unit file accordingly. [ 4.476561] systemd[1]: /lib/systemd/system/virtlockd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-sock → /run/libvirt/virtlockd-sock; please update the unit file accordingly. [ 4.477606] systemd[1]: /lib/systemd/system/virtlockd-admin.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-admin-sock → /run/libvirt/virtlockd-admin-sock; please update the unit file accordingly. [ 4.529016] systemd[1]: Queued start job for default target Graphical Interface. [ 4.530954] systemd[1]: Created slice Virtual Machine and Container Slice. [ 4.532543] systemd[1]: Created slice system-getty.slice. [ 4.533497] systemd[1]: Created slice system-modprobe.slice. [ 4.534391] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 4.535251] systemd[1]: Created slice User and Session Slice. [ 4.535872] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 4.536478] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.537272] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.537782] systemd[1]: Reached target Local Encrypted Volumes. [ 4.538282] systemd[1]: Reached target Paths. [ 4.538754] systemd[1]: Reached target Remote File Systems. [ 4.539220] systemd[1]: Reached target Slices. [ 4.539709] systemd[1]: Reached target Libvirt guests shutdown. [ 4.540306] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 4.540940] systemd[1]: Listening on LVM2 poll daemon socket. [ 4.542503] systemd[1]: Listening on Syslog Socket. [ 4.543147] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.543716] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 4.544562] systemd[1]: Listening on Journal Audit Socket. [ 4.545266] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.546000] systemd[1]: Listening on Journal Socket. [ 4.546726] systemd[1]: Listening on udev Control Socket. [ 4.547376] systemd[1]: Listening on udev Kernel Socket. [ 4.548178] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 4.550946] systemd[1]: Mounting POSIX Message Queue File System... [ 4.554870] systemd[1]: Mounting Kernel Debug File System... [ 4.559269] systemd[1]: Mounting Kernel Trace File System... [ 4.560475] systemd[1]: Finished Availability of block devices. [ 4.564386] systemd[1]: Starting Set the console keyboard layout... [ 4.568389] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 4.571768] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 4.575519] systemd[1]: Starting Load Kernel Module configfs... [ 4.579312] systemd[1]: Starting Load Kernel Module drm... [ 4.583138] systemd[1]: Starting Load Kernel Module fuse... [ 4.584711] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 4.584859] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 4.591475] systemd[1]: Starting Journal Service... [ 4.608127] systemd[1]: Starting Load Kernel Modules... [ 4.611369] systemd[1]: Starting Remount Root and Kernel File Systems... [ 4.616077] systemd[1]: Starting Coldplug All udev Devices... [ 4.616331] fuse: init (API version 7.32) [ 4.625621] systemd[1]: Mounted POSIX Message Queue File System. [ 4.626914] systemd[1]: Mounted Kernel Debug File System. [ 4.627686] systemd[1]: Mounted Kernel Trace File System. [ 4.628985] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 4.630519] systemd[1]: modprobe@configfs.service: Succeeded. [ 4.631114] systemd[1]: Finished Load Kernel Module configfs. [ 4.632434] systemd[1]: modprobe@fuse.service: Succeeded. [ 4.633017] systemd[1]: Finished Load Kernel Module fuse. [ 4.637524] systemd[1]: Mounting FUSE Control File System... [ 4.641402] systemd[1]: Mounting Kernel Configuration File System... [ 4.643471] systemd[1]: modprobe@drm.service: Succeeded. [ 4.644153] systemd[1]: Finished Load Kernel Module drm. [ 4.651290] systemd[1]: Mounted FUSE Control File System. [ 4.655065] xen:xen_evtchn: Event-channel device installed [ 4.655621] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 4.658810] systemd[1]: Finished Remount Root and Kernel File Systems. [ 4.660486] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 4.660578] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 4.664090] systemd[1]: Starting Load/Save Random Seed... [ 4.675933] systemd[1]: Starting Create System Users... [ 4.681305] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 4.682306] systemd[1]: Mounted Kernel Configuration File System. [ 4.704614] xen_pciback: backend is vpci [ 4.723145] systemd[1]: Finished Load/Save Random Seed. [ 4.724511] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 4.727981] systemd[1]: Finished Create System Users. [ 4.731300] systemd[1]: Starting Create Static Device Nodes in /dev... [ 4.767047] systemd[1]: Finished Create Static Device Nodes in /dev. [ 4.768633] systemd[1]: Finished Load Kernel Modules. [ 4.772026] systemd[1]: Starting Apply Kernel Variables... [ 4.777154] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 4.820252] systemd[1]: Finished Set the console keyboard layout. [ 4.821024] systemd[1]: Reached target Local File Systems (Pre). [ 4.821654] systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped. [ 4.821699] systemd[1]: Reached target Local File Systems. [ 4.822306] systemd[1]: Reached target Containers. [ 4.825600] systemd[1]: Starting Load AppArmor profiles... [ 4.828601] systemd[1]: Starting Set console font and keymap... [ 4.829306] systemd[1]: Condition check resulted in Mark the need to relabel after reboot being skipped. [ 4.829499] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 4.829648] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 4.831343] systemd[1]: Finished Apply Kernel Variables. [ 4.928612] systemd[1]: Started Rule-based Manager for Device Events and Files. [ 4.946298] systemd[1]: Finished Set console font and keymap. [ 4.965869] systemd[1]: Started Journal Service. [ 5.058420] audit: type=1400 audit(1612192799.219:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=282 comm="apparmor_parser" [ 5.058427] audit: type=1400 audit(1612192799.219:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=282 comm="apparmor_parser" [ 5.058568] audit: type=1400 audit(1612192799.219:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=284 comm="apparmor_parser" [ 5.059173] audit: type=1400 audit(1612192799.219:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/libvirtd" pid=281 comm="apparmor_parser" [ 5.059178] audit: type=1400 audit(1612192799.219:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/libvirtd//qemu_bridge_helper" pid=281 comm="apparmor_parser" [ 5.063356] audit: type=1400 audit(1612192799.223:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=283 comm="apparmor_parser" [ 5.063361] audit: type=1400 audit(1612192799.223:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=283 comm="apparmor_parser" [ 5.063365] audit: type=1400 audit(1612192799.223:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=283 comm="apparmor_parser" [ 5.075832] audit: type=1400 audit(1612192799.235:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="virt-aa-helper" pid=285 comm="apparmor_parser" [ 5.086238] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 5.101154] ACPI: Power Button [PWRB] [ 5.101281] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 5.101362] ACPI: Power Button [PWRF] [ 6.632356] hid: raw HID events driver (C) Jiri Kosina [ 6.637863] iTCO_vendor_support: vendor-support=0 [ 6.644457] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 6.644506] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 6.644755] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.650057] usbcore: registered new interface driver usbhid [ 6.650060] usbhid: USB HID core driver [ 6.669050] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.686254] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 6.728059] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.728395] cfg80211: Loaded X.509 cert 'benh@xxxxxxxxxx: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 6.728737] cfg80211: Loaded X.509 cert 'romain.perier@xxxxxxxxx: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 6.729232] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.730315] platform regulatory.0: firmware: failed to load regulatory.db (-2) [ 6.730317] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 6.730320] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 6.730323] cfg80211: failed to load regulatory.db [ 6.834092] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 6.959121] usb 2-1.4: reset high-speed USB device number 3 using ehci-pci [ 7.068098] mt7601u 2-1.4:1.0: ASIC revision: 76010001 MAC revision: 76010500 [ 7.069940] mt7601u 2-1.4:1.0: firmware: direct-loading firmware mt7601u.bin [ 7.069948] mt7601u 2-1.4:1.0: Firmware Version: 0.1.00 Build: 7640 Build time: 201302052146____ [ 7.086386] input: USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:099A:610C.0001/input/input6 [ 7.089904] cryptd: max_cpu_qlen set to 1000 [ 7.094544] Adding 3905532k swap on /dev/sda1. Priority:-2 extents:1 across:3905532k SSFS [ 7.148468] AVX version of gcm_enc/dec engaged. [ 7.148470] AES CTR mode by8 optimization enabled [ 7.149710] hid-generic 0003:099A:610C.0001: input,hidraw0: USB HID v1.00 Keyboard [ USB Multimedia Keyboard ] on usb-0000:00:1a.0-1.2/input0 [ 7.150072] input: USB Multimedia Keyboard Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:099A:610C.0002/input/input7 [ 7.213264] input: USB Multimedia Keyboard System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:099A:610C.0002/input/input8 [ 7.213742] hid-generic 0003:099A:610C.0002: input,hidraw1: USB HID v1.00 Device [ USB Multimedia Keyboard ] on usb-0000:00:1a.0-1.2/input1 [ 7.475713] mt7601u 2-1.4:1.0: EEPROM ver:0d fae:00 [ 7.704506] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 7.706192] usbcore: registered new interface driver mt7601u [ 7.718325] mt7601u 2-1.4:1.0 wlx20e0160064bd: renamed from wlan0 [ 10.459142] wlx20e0160064bd: authenticate with 68:ff:7b:47:86:17 [ 10.493855] wlx20e0160064bd: send auth to 68:ff:7b:47:86:17 (try 1/3) [ 10.497613] wlx20e0160064bd: authenticated [ 10.501110] wlx20e0160064bd: associate with 68:ff:7b:47:86:17 (try 1/3) [ 10.508058] wlx20e0160064bd: RX AssocResp from 68:ff:7b:47:86:17 (capab=0x431 status=0 aid=2) [ 10.545847] wlx20e0160064bd: associated [ 10.599233] IPv6: ADDRCONF(NETDEV_CHANGE): wlx20e0160064bd: link becomes ready [ 14.156418] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 14.190609] br-lan: port 1(enp13s0) entered blocking state [ 14.190611] br-lan: port 1(enp13s0) entered disabled state [ 14.190697] device enp13s0 entered promiscuous mode [ 14.195933] r8169 0000:0d:00.0: firmware: direct-loading firmware rtl_nic/rtl8168h-2.fw [ 14.221144] Generic FE-GE Realtek PHY r8169-d00:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-d00:00, irq=IGNORE) [ 14.401259] r8169 0000:0d:00.0 enp13s0: Link is Down [ 14.405272] br-lan: port 1(enp13s0) entered blocking state [ 14.405274] br-lan: port 1(enp13s0) entered forwarding state [ 15.189165] br-lan: port 1(enp13s0) entered disabled state