Re: Question on PCIe Device Tree bindings, Was: [PATCH] xen/arm: domain_build: Ignore device nodes with invalid addresses

[Stefano Stabellini <sstabellini@xxxxxxxxxx>]

On Thu, 4 Feb 2021, Rob Herring wrote:
> On Thu, Feb 4, 2021 at 2:36 PM Stefano Stabellini
> <sstabellini@xxxxxxxxxx> wrote:
> >
> > On Thu, 4 Feb 2021, Rob Herring wrote:
> > > On Thu, Feb 4, 2021 at 11:56 AM Stefano Stabellini
> > > <sstabellini@xxxxxxxxxx> wrote:
> > > >
> > > > Hi Rob,
> > > >
> > > > We have a question on the PCIe device tree bindings. In summary, we have
> > > > come across the Raspberry Pi 4 PCIe description below:
> > > >
> > > >
> > > > pcie0: pcie@7d500000 {
> > > >    compatible = "brcm,bcm2711-pcie";
> > > >    reg = <0x0 0x7d500000  0x0 0x9310>;
> > > >    device_type = "pci";
> > > >    #address-cells = <3>;
> > > >    #interrupt-cells = <1>;
> > > >    #size-cells = <2>;
> > > >    interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> > > >                 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> > > >    interrupt-names = "pcie", "msi";
> > > >    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> > > >    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
> > > >                                                      
> > > > IRQ_TYPE_LEVEL_HIGH>;
> > > >    msi-controller;
> > > >    msi-parent = <&pcie0>;
> > > >
> > > >    ranges = <0x02000000 0x0 0xc0000000 0x6 0x00000000
> > > >              0x0 0x40000000>;
> > > >    /*
> > > >     * The wrapper around the PCIe block has a bug
> > > >     * preventing it from accessing beyond the first 3GB of
> > > >     * memory.
> > > >     */
> > > >    dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
> > > >                  0x0 0xc0000000>;
> > > >    brcm,enable-ssc;
> > > >
> > > >    pci@1,0 {
> > > >            #address-cells = <3>;
> > > >            #size-cells = <2>;
> > > >            ranges;
> > > >
> > > >            reg = <0 0 0 0 0>;
> > > >
> > > >            usb@1,0 {
> > > >                    reg = <0x10000 0 0 0 0>;
> > > >                    resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
> > > >            };
> > > >    };
> > > > };
> > > >
> > > >
> > > > Xen fails to parse it with an error because it tries to remap reg =
> > > > <0x10000 0 0 0 0> as if it was a CPU address and of course it fails.
> > > >
> > > > Reading the device tree description in details, I cannot tell if Xen has
> > > > a bug: the ranges property under pci@1,0 means that pci@1,0 is treated
> > > > like a default bus (not a PCI bus), hence, the children regs are
> > > > translated using the ranges property of the parent (pcie@7d500000).
> > > >
> > > > Is it possible that the device tree is missing device_type =
> > > > "pci" under pci@1,0? Or is it just implied because pci@1,0 is a child of
> > > > pcie@7d500000?
> > >
> > > Indeed, it should have device_type. Linux (only recently due to
> > > another missing device_type case) will also look at node name, but
> > > only 'pcie'.
> > >
> > > We should be able to create (or extend pci-bus.yaml) a schema to catch
> > > this case.
> >
> > Ah, that is what I needed to know, thank you!  Is Linux considering a
> > node named "pcie" as if it has device_type = "pci"?
> 
> Yes, it was added for Rockchip RK3399 to avoid a DT update and regression.
> 
> > In Xen, also to cover the RPi4 case, maybe I could add a check for the
> > node name to be "pci" or "pcie" and if so Xen could assume device_type =
> > "pci".
> 
> I assume this never worked for RPi4 (and Linux will have the same
> issue), so can't we just update the DT in this case?

I am not sure where the DT is coming from, probably from the RPi4 kernel
trees or firmware. I think it would be good if somebody got in touch to
tell them they have an issue.

Elliot, where was that device tree coming from originally?


>From a Xen perspective, for the sake of minimizing user pains (given
that it might take a while to update those DTs) and to introduce as few
ties as possible with kernel versions, it might be best to add the
"pci" name workaround maybe with a /* HACK */ comment on top.