|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [PATCH 20/33] docs: ABI: testing: make the files compatible with ReST output
On Wed, 28 Oct 2020 15:23:18 +0100 Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> wrote: > From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx> > > Some files over there won't parse well by Sphinx. > > Fix them. > > Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx> > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> Query below... I'm going to guess a rebase issue? Other than that Acked-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> # for IIO > diff --git a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 > b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 > index b7259234ad70..a10a4de3e5fe 100644 > --- a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 > +++ b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 > @@ -3,67 +3,85 @@ KernelVersion: 4.11 > Contact: benjamin.gaignard@xxxxxx > Description: > Reading returns the list possible master modes which are: > - - "reset" : The UG bit from the TIMx_EGR register is > + > + > + - "reset" > + The UG bit from the TIMx_EGR register is > used as trigger output (TRGO). > - - "enable" : The Counter Enable signal CNT_EN is used > + - "enable" > + The Counter Enable signal CNT_EN is used > as trigger output. > - - "update" : The update event is selected as trigger output. > + - "update" > + The update event is selected as trigger output. > For instance a master timer can then be used > as a prescaler for a slave timer. > - - "compare_pulse" : The trigger output send a positive pulse > - when the CC1IF flag is to be set. > - - "OC1REF" : OC1REF signal is used as trigger output. > - - "OC2REF" : OC2REF signal is used as trigger output. > - - "OC3REF" : OC3REF signal is used as trigger output. > - - "OC4REF" : OC4REF signal is used as trigger output. > + - "compare_pulse" > + The trigger output send a positive pulse > + when the CC1IF flag is to be set. > + - "OC1REF" > + OC1REF signal is used as trigger output. > + - "OC2REF" > + OC2REF signal is used as trigger output. > + - "OC3REF" > + OC3REF signal is used as trigger output. > + - "OC4REF" > + OC4REF signal is used as trigger output. > + > Additional modes (on TRGO2 only): > - - "OC5REF" : OC5REF signal is used as trigger output. > - - "OC6REF" : OC6REF signal is used as trigger output. > + > + - "OC5REF" > + OC5REF signal is used as trigger output. > + - "OC6REF" > + OC6REF signal is used as trigger output. > - "compare_pulse_OC4REF": > - OC4REF rising or falling edges generate pulses. > + OC4REF rising or falling edges generate pulses. > - "compare_pulse_OC6REF": > - OC6REF rising or falling edges generate pulses. > + OC6REF rising or falling edges generate pulses. > - "compare_pulse_OC4REF_r_or_OC6REF_r": > - OC4REF or OC6REF rising edges generate pulses. > + OC4REF or OC6REF rising edges generate pulses. > - "compare_pulse_OC4REF_r_or_OC6REF_f": > - OC4REF rising or OC6REF falling edges generate pulses. > + OC4REF rising or OC6REF falling edges generate > + pulses. > - "compare_pulse_OC5REF_r_or_OC6REF_r": > - OC5REF or OC6REF rising edges generate pulses. > + OC5REF or OC6REF rising edges generate pulses. > - "compare_pulse_OC5REF_r_or_OC6REF_f": > - OC5REF rising or OC6REF falling edges generate pulses. > + OC5REF rising or OC6REF falling edges generate > + pulses. > > - +-----------+ +-------------+ +---------+ > - | Prescaler +-> | Counter | +-> | Master | TRGO(2) > - +-----------+ +--+--------+-+ |-> | Control +--> > - | | || +---------+ > - +--v--------+-+ OCxREF || +---------+ > - | Chx compare +----------> | Output | ChX > - +-----------+-+ | | Control +--> > - . | | +---------+ > - . | | . > - +-----------v-+ OC6REF | . > - | Ch6 compare +---------+> > - +-------------+ > + :: > > - Example with: "compare_pulse_OC4REF_r_or_OC6REF_r": > + +-----------+ +-------------+ +---------+ > + | Prescaler +-> | Counter | +-> | Master | TRGO(2) > + +-----------+ +--+--------+-+ |-> | Control +--> > + | | || +---------+ > + +--v--------+-+ OCxREF || +---------+ > + | Chx compare +----------> | Output | ChX > + +-----------+-+ | | Control +--> > + . | | +---------+ > + . | | . > + +-----------v-+ OC6REF | . > + | Ch6 compare +---------+> > + +-------------+ > > - X > - X X > - X . . X > - X . . X > - X . . X > - count X . . . . X > - . . . . > - . . . . > - +---------------+ > - OC4REF | . . | > - +-+ . . +-+ > - . +---+ . > - OC6REF . | | . > - +-------+ +-------+ > - +-+ +-+ > - TRGO2 | | | | > - +-+ +---+ +---------+ > + Example with: "compare_pulse_OC4REF_r_or_OC6REF_r":: > + > + X > + X X > + X . . X > + X . . X > + X . . X > + count X . . . . X > + . . . . > + . . . . > + +---------------+ > + OC4REF | . . | > + +-+ . . +-+ > + . +---+ . > + OC6REF . | | . > + +-------+ +-------+ > + +-+ +-+ > + TRGO2 | | | | > + +-+ +---+ +---------+ > > What: /sys/bus/iio/devices/triggerX/master_mode > KernelVersion: 4.11 > @@ -91,6 +109,30 @@ Description: > When counting down the counter start from preset value > and fire event when reach 0. > Where did these come from? > +What: > /sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available > +KernelVersion: 4.12 > +Contact: benjamin.gaignard@xxxxxx > +Description: > + Reading returns the list possible quadrature modes. > + > +What: > /sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode > +KernelVersion: 4.12 > +Contact: benjamin.gaignard@xxxxxx > +Description: > + Configure the device counter quadrature modes: > + > + channel_A: > + Encoder A input servers as the count input and B as > + the UP/DOWN direction control input. > + > + channel_B: > + Encoder B input serves as the count input and A as > + the UP/DOWN direction control input. > + > + quadrature: > + Encoder A and B inputs are mixed to get direction > + and count with a scale of 0.25. > + > What: > /sys/bus/iio/devices/iio:deviceX/in_count_enable_mode_available > KernelVersion: 4.12 > Contact: benjamin.gaignard@xxxxxx > @@ -104,6 +146,7 @@ Description: > Configure the device counter enable modes, in all case > counting direction is set by in_count0_count_direction > attribute and the counter is clocked by the internal clock. > + > always: > Counter is always ON. >
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |