[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[patch RFC 29/38] x86/pci: Set default irq domain in pcibios_add_device()



Now that interrupt remapping sets the irqdomain pointer when a PCI device
is added it's possible to store the default irq domain in the device struct
in pcibios_add_device().

If the bus to which a device is connected has an irq domain associated then
this domain is used otherwise the default domain (PCI/MSI native or XEN
PCI/MSI) is used. Using the bus domain ensures that special MSI bus domains
like VMD work.

This makes XEN and the non-remapped native case work solely based on the
irq domain pointer in struct device for PCI/MSI and allows to remove the
arch fallback and make most of the x86_msi ops private to XEN in the next
steps.

Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: linux-pci@xxxxxxxxxxxxxxx
---
 arch/x86/include/asm/irqdomain.h |    2 ++
 arch/x86/kernel/apic/msi.c       |    2 +-
 arch/x86/pci/common.c            |   18 +++++++++++++++++-
 3 files changed, 20 insertions(+), 2 deletions(-)

--- a/arch/x86/include/asm/irqdomain.h
+++ b/arch/x86/include/asm/irqdomain.h
@@ -53,9 +53,11 @@ extern int mp_irqdomain_ioapic_idx(struc
 #ifdef CONFIG_PCI_MSI
 void x86_create_pci_msi_domain(void);
 struct irq_domain *native_create_pci_msi_domain(void);
+extern struct irq_domain *x86_pci_msi_default_domain;
 #else
 static inline void x86_create_pci_msi_domain(void) { }
 #define native_create_pci_msi_domain   NULL
+#define x86_pci_msi_default_domain     NULL
 #endif
 
 #endif
--- a/arch/x86/kernel/apic/msi.c
+++ b/arch/x86/kernel/apic/msi.c
@@ -21,7 +21,7 @@
 #include <asm/apic.h>
 #include <asm/irq_remapping.h>
 
-static struct irq_domain *x86_pci_msi_default_domain __ro_after_init;
+struct irq_domain *x86_pci_msi_default_domain __ro_after_init;
 
 static void __irq_msi_compose_msg(struct irq_cfg *cfg, struct msi_msg *msg)
 {
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -19,6 +19,7 @@
 #include <asm/smp.h>
 #include <asm/pci_x86.h>
 #include <asm/setup.h>
+#include <asm/irqdomain.h>
 
 unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
                                PCI_PROBE_MMCONF;
@@ -633,8 +634,9 @@ static void set_dev_domain_options(struc
 
 int pcibios_add_device(struct pci_dev *dev)
 {
-       struct setup_data *data;
        struct pci_setup_rom *rom;
+       struct irq_domain *msidom;
+       struct setup_data *data;
        u64 pa_data;
 
        pa_data = boot_params.hdr.setup_data;
@@ -661,6 +663,20 @@ int pcibios_add_device(struct pci_dev *d
                memunmap(data);
        }
        set_dev_domain_options(dev);
+
+       /*
+        * Setup the initial MSI domain of the device. If the underlying
+        * bus has a PCI/MSI irqdomain associated use the bus domain,
+        * otherwise set the default domain. This ensures that special irq
+        * domains e.g. VMD are preserved. The default ensures initial
+        * operation if irq remapping is not active. If irq remapping is
+        * active it will overwrite the domain pointer when the device is
+        * associated to a remapping domain.
+        */
+       msidom = dev_get_msi_domain(&dev->bus->dev);
+       if (!msidom)
+               msidom = x86_pci_msi_default_domain;
+       dev_set_msi_domain(&dev->dev, msidom);
        return 0;
 }
 




 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.