[Xen-devel] [PATCH 2/5] IOMMU: iommu_intpost is x86/HVM-only

[Jan Beulich <jbeulich@xxxxxxxx>]

Provide a #define for all other cases.

Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>

--- a/docs/misc/xen-command-line.pandoc
+++ b/docs/misc/xen-command-line.pandoc
@@ -1309,6 +1309,9 @@ boolean (e.g. `iommu=no`) can override t
     This option depends on `intremap`, and is disabled by default due to some
     corner cases in the implementation which have yet to be resolved.
 
+    This option is not valid on Arm, or on x86 builds of Xen without HVM
+    support.
+
 *   The `crash-disable` boolean controls disabling IOMMU functionality 
(DMAR/IR/QI)
     before switching to a crash kernel. This option is inactive by default and
     is for compatibility with older kdump kernels only. Modern kernels copy
--- a/xen/drivers/passthrough/iommu.c
+++ b/xen/drivers/passthrough/iommu.c
@@ -43,14 +43,6 @@ bool __read_mostly iommu_hwdom_passthrou
 bool __hwdom_initdata iommu_hwdom_inclusive;
 int8_t __hwdom_initdata iommu_hwdom_reserved = -1;
 
-/*
- * In the current implementation of VT-d posted interrupts, in some extreme
- * cases, the per cpu list which saves the blocked vCPU will be very long,
- * and this will affect the interrupt latency, so let this feature off by
- * default until we find a good solution to resolve it.
- */
-bool_t __read_mostly iommu_intpost;
-
 #ifndef iommu_hap_pt_share
 bool __read_mostly iommu_hap_pt_share = true;
 #endif
@@ -93,8 +85,10 @@ static int __init parse_iommu_param(cons
         else if ( (val = parse_boolean("intremap", s, ss)) >= 0 )
             iommu_intremap = val ? iommu_intremap_full : iommu_intremap_off;
 #endif
+#ifndef iommu_intpost
         else if ( (val = parse_boolean("intpost", s, ss)) >= 0 )
             iommu_intpost = val;
+#endif
 #ifdef CONFIG_KEXEC
         else if ( (val = parse_boolean("crash-disable", s, ss)) >= 0 )
             iommu_crash_disable = val;
@@ -486,8 +480,10 @@ int __init iommu_setup(void)
         panic("Couldn't enable %s and iommu=required/force\n",
               !iommu_enabled ? "IOMMU" : "Interrupt Remapping");
 
+#ifndef iommu_intpost
     if ( !iommu_intremap )
         iommu_intpost = 0;
+#endif
 
     printk("I/O virtualisation %sabled\n", iommu_enabled ? "en" : "dis");
     if ( !iommu_enabled )
@@ -563,10 +559,13 @@ void iommu_crash_shutdown(void)
 
     if ( iommu_enabled )
         iommu_get_ops()->crash_shutdown();
-    iommu_enabled = iommu_intpost = 0;
+    iommu_enabled = false;
 #ifndef iommu_intremap
     iommu_intremap = iommu_intremap_off;
 #endif
+#ifndef iommu_intpost
+    iommu_intpost = false;
+#endif
 }
 
 int iommu_get_reserved_device_memory(iommu_grdm_t *func, void *ctxt)
--- a/xen/drivers/passthrough/vtd/iommu.c
+++ b/xen/drivers/passthrough/vtd/iommu.c
@@ -2297,13 +2297,15 @@ static int __init vtd_setup(void)
         if ( iommu_intremap && !ecap_intr_remap(iommu->ecap) )
             iommu_intremap = iommu_intremap_off;
 
+#ifndef iommu_intpost
         /*
          * We cannot use posted interrupt if X86_FEATURE_CX16 is
          * not supported, since we count on this feature to
          * atomically update 16-byte IRTE in posted format.
          */
         if ( !cap_intr_post(iommu->cap) || !iommu_intremap || !cpu_has_cx16 )
-            iommu_intpost = 0;
+            iommu_intpost = false;
+#endif
 
         if ( !vtd_ept_page_compatible(iommu) )
             clear_iommu_hap_pt_share();
@@ -2330,7 +2332,9 @@ static int __init vtd_setup(void)
     P(iommu_hwdom_passthrough, "Dom0 DMA Passthrough");
     P(iommu_qinval, "Queued Invalidation");
     P(iommu_intremap, "Interrupt Remapping");
+#ifndef iommu_intpost
     P(iommu_intpost, "Posted Interrupt");
+#endif
     P(iommu_hap_pt_share, "Shared EPT tables");
 #undef P
 
@@ -2348,7 +2352,9 @@ static int __init vtd_setup(void)
     iommu_hwdom_passthrough = false;
     iommu_qinval = 0;
     iommu_intremap = iommu_intremap_off;
-    iommu_intpost = 0;
+#ifndef iommu_intpost
+    iommu_intpost = false;
+#endif
     return ret;
 }
 
--- a/xen/drivers/passthrough/x86/iommu.c
+++ b/xen/drivers/passthrough/x86/iommu.c
@@ -29,6 +29,16 @@ struct iommu_ops __read_mostly iommu_ops
 
 enum iommu_intremap __read_mostly iommu_intremap = iommu_intremap_full;
 
+#ifndef iommu_intpost
+/*
+ * In the current implementation of VT-d posted interrupts, in some extreme
+ * cases, the per cpu list which saves the blocked vCPU will be very long,
+ * and this will affect the interrupt latency, so let this feature off by
+ * default until we find a good solution to resolve it.
+ */
+bool __read_mostly iommu_intpost;
+#endif
+
 int __init iommu_hardware_setup(void)
 {
     struct IO_APIC_route_entry **ioapic_entries = NULL;
--- a/xen/include/xen/iommu.h
+++ b/xen/include/xen/iommu.h
@@ -54,7 +54,7 @@ static inline bool_t dfn_eq(dfn_t x, dfn
 
 extern bool_t iommu_enable, iommu_enabled;
 extern bool force_iommu, iommu_quarantine, iommu_verbose, iommu_igfx;
-extern bool_t iommu_snoop, iommu_qinval, iommu_intpost;
+extern bool_t iommu_snoop, iommu_qinval;
 
 #ifdef CONFIG_X86
 extern enum __packed iommu_intremap {
@@ -70,6 +70,12 @@ extern enum __packed iommu_intremap {
 # define iommu_intremap false
 #endif
 
+#if defined(CONFIG_X86) && defined(CONFIG_HVM)
+extern bool iommu_intpost;
+#else
+# define iommu_intpost false
+#endif
+
 #if defined(CONFIG_IOMMU_FORCE_PT_SHARE)
 #define iommu_hap_pt_share true
 #elif defined(CONFIG_HVM)


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel