[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v4 3/6] arm64: remove uaccess_ttbr0 asm macros from cache functions
We currently duplicate the logic to enable/disable uaccess via TTBR0, with C functions and assembly macros. This is a maintenenace burden and is liable to lead to subtle bugs, so let's get rid of the assembly macros, and always use the C functions. This requires refactoring some assembly functions to have a C wrapper. Signed-off-by: Pavel Tatashin <pasha.tatashin@xxxxxxxxxx> --- arch/arm64/include/asm/asm-uaccess.h | 22 ----------------- arch/arm64/include/asm/cacheflush.h | 35 ++++++++++++++++++++++++--- arch/arm64/mm/cache.S | 36 ++++++++++------------------ arch/arm64/mm/flush.c | 2 +- 4 files changed, 46 insertions(+), 49 deletions(-) diff --git a/arch/arm64/include/asm/asm-uaccess.h b/arch/arm64/include/asm/asm-uaccess.h index f68a0e64482a..fba2a69f7fef 100644 --- a/arch/arm64/include/asm/asm-uaccess.h +++ b/arch/arm64/include/asm/asm-uaccess.h @@ -34,28 +34,6 @@ msr ttbr0_el1, \tmp1 // set the non-PAN TTBR0_EL1 isb .endm - - .macro uaccess_ttbr0_disable, tmp1, tmp2 -alternative_if_not ARM64_HAS_PAN - save_and_disable_irq \tmp2 // avoid preemption - __uaccess_ttbr0_disable \tmp1 - restore_irq \tmp2 -alternative_else_nop_endif - .endm - - .macro uaccess_ttbr0_enable, tmp1, tmp2, tmp3 -alternative_if_not ARM64_HAS_PAN - save_and_disable_irq \tmp3 // avoid preemption - __uaccess_ttbr0_enable \tmp1, \tmp2 - restore_irq \tmp3 -alternative_else_nop_endif - .endm -#else - .macro uaccess_ttbr0_disable, tmp1, tmp2 - .endm - - .macro uaccess_ttbr0_enable, tmp1, tmp2, tmp3 - .endm #endif #endif diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h index 665c78e0665a..431f8da2dd02 100644 --- a/arch/arm64/include/asm/cacheflush.h +++ b/arch/arm64/include/asm/cacheflush.h @@ -61,16 +61,45 @@ * - kaddr - page address * - size - region size */ -extern void __flush_icache_range(unsigned long start, unsigned long end); -extern int invalidate_icache_range(unsigned long start, unsigned long end); +extern void __asm_flush_icache_range(unsigned long start, unsigned long end); +extern long __asm_flush_cache_user_range(unsigned long start, + unsigned long end); +extern int __asm_invalidate_icache_range(unsigned long start, + unsigned long end); extern void __flush_dcache_area(void *addr, size_t len); extern void __inval_dcache_area(void *addr, size_t len); extern void __clean_dcache_area_poc(void *addr, size_t len); extern void __clean_dcache_area_pop(void *addr, size_t len); extern void __clean_dcache_area_pou(void *addr, size_t len); -extern long __flush_cache_user_range(unsigned long start, unsigned long end); extern void sync_icache_aliases(void *kaddr, unsigned long len); +static inline void __flush_cache_user_range(unsigned long start, + unsigned long end) +{ + uaccess_ttbr0_enable(); + __asm_flush_cache_user_range(start, end); + uaccess_ttbr0_disable(); +} + +static inline void __flush_icache_range(unsigned long start, unsigned long end) +{ + uaccess_ttbr0_enable(); + __asm_flush_icache_range(start, end); + uaccess_ttbr0_disable(); +} + +static inline int invalidate_icache_range(unsigned long start, + unsigned long end) +{ + int ret; + + uaccess_ttbr0_enable(); + ret = __asm_invalidate_icache_range(start, end); + uaccess_ttbr0_disable(); + + return ret; +} + static inline void flush_icache_range(unsigned long start, unsigned long end) { __flush_icache_range(start, end); diff --git a/arch/arm64/mm/cache.S b/arch/arm64/mm/cache.S index db767b072601..602b9aa8603a 100644 --- a/arch/arm64/mm/cache.S +++ b/arch/arm64/mm/cache.S @@ -15,7 +15,7 @@ #include <asm/asm-uaccess.h> /* - * flush_icache_range(start,end) + * __asm_flush_icache_range(start,end) * * Ensure that the I and D caches are coherent within specified region. * This is typically used when code has been written to a memory region, @@ -24,11 +24,11 @@ * - start - virtual start address of region * - end - virtual end address of region */ -ENTRY(__flush_icache_range) +ENTRY(__asm_flush_icache_range) /* FALLTHROUGH */ /* - * __flush_cache_user_range(start,end) + * __asm_flush_cache_user_range(start,end) * * Ensure that the I and D caches are coherent within specified region. * This is typically used when code has been written to a memory region, @@ -37,8 +37,7 @@ ENTRY(__flush_icache_range) * - start - virtual start address of region * - end - virtual end address of region */ -ENTRY(__flush_cache_user_range) - uaccess_ttbr0_enable x2, x3, x4 +ENTRY(__asm_flush_cache_user_range) alternative_if ARM64_HAS_CACHE_IDC dsb ishst b 7f @@ -60,41 +59,32 @@ alternative_if ARM64_HAS_CACHE_DIC alternative_else_nop_endif invalidate_icache_by_line x0, x1, x2, x3, 9f 8: mov x0, #0 -1: - uaccess_ttbr0_disable x1, x2 - ret -9: - mov x0, #-EFAULT +1: ret +9: mov x0, #-EFAULT b 1b -ENDPROC(__flush_icache_range) -ENDPROC(__flush_cache_user_range) +ENDPROC(__asm_flush_icache_range) +ENDPROC(__asm_flush_cache_user_range) /* - * invalidate_icache_range(start,end) + * __asm_invalidate_icache_range(start,end) * * Ensure that the I cache is invalid within specified region. * * - start - virtual start address of region * - end - virtual end address of region */ -ENTRY(invalidate_icache_range) +ENTRY(__asm_invalidate_icache_range) alternative_if ARM64_HAS_CACHE_DIC mov x0, xzr isb ret alternative_else_nop_endif - - uaccess_ttbr0_enable x2, x3, x4 - invalidate_icache_by_line x0, x1, x2, x3, 2f mov x0, xzr -1: - uaccess_ttbr0_disable x1, x2 - ret -2: - mov x0, #-EFAULT +1: ret +2: mov x0, #-EFAULT b 1b -ENDPROC(invalidate_icache_range) +ENDPROC(__asm_invalidate_icache_range) /* * __flush_dcache_area(kaddr, size) diff --git a/arch/arm64/mm/flush.c b/arch/arm64/mm/flush.c index ac485163a4a7..b23f34d23f31 100644 --- a/arch/arm64/mm/flush.c +++ b/arch/arm64/mm/flush.c @@ -75,7 +75,7 @@ EXPORT_SYMBOL(flush_dcache_page); /* * Additional functions defined in assembly. */ -EXPORT_SYMBOL(__flush_icache_range); +EXPORT_SYMBOL(__asm_flush_icache_range); #ifdef CONFIG_ARCH_HAS_PMEM_API void arch_wb_cache_pmem(void *addr, size_t size) -- 2.24.0 _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |