Re: [Xen-devel] [PATCH v2 13/20] hw/pci-host/piix: Extract piix3_create()

[Esteban Bosse <estebanbosse@xxxxxxxxx>]

El vie, 18-10-2019 a las 15:47 +0200, Philippe Mathieu-Daudé escribió:
> Extract the PIIX3 creation code from the i440fx_init() function.
> 
> Reviewed-by: Aleksandar Markovic <amarkovic@xxxxxxxxxxxx>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@xxxxxxxxxx>
> ---
>  hw/pci-host/piix.c | 51 ++++++++++++++++++++++++++++--------------
> ----
>  1 file changed, 31 insertions(+), 20 deletions(-)
> 
> diff --git a/hw/pci-host/piix.c b/hw/pci-host/piix.c
> index 2f4cbcbfe9..3292703de7 100644
> --- a/hw/pci-host/piix.c
> +++ b/hw/pci-host/piix.c
> @@ -331,6 +331,36 @@ static void i440fx_realize(PCIDevice *dev, Error
> **errp)
>      }
>  }
>  
> +static PIIX3State *piix3_create(PCIBus *pci_bus, ISABus **isa_bus)
> +{
> +    PIIX3State *piix3;
> +    PCIDevice *pci_dev;
> +
> +    /*
> +     * Xen supports additional interrupt routes from the PCI devices
> to
> +     * the IOAPIC: the four pins of each PCI device on the bus are
> also
> +     * connected to the IOAPIC directly.
> +     * These additional routes can be discovered through ACPI.
> +     */
> +    if (xen_enabled()) {
> +        pci_dev = pci_create_simple_multifunction(pci_bus, -1, true,
> +                                                  TYPE_PIIX3_XEN_DEV
> ICE);
> +        piix3 = PIIX3_PCI_DEVICE(pci_dev);
> +        pci_bus_irqs(pci_bus, xen_piix3_set_irq,
> xen_pci_slot_get_pirq,
> +                     piix3, XEN_PIIX_NUM_PIRQS);
> +    } else {
> +        pci_dev = pci_create_simple_multifunction(pci_bus, -1, true,
> +                                                  TYPE_PIIX3_DEVICE)
> ;
> +        piix3 = PIIX3_PCI_DEVICE(pci_dev);
> +        pci_bus_irqs(pci_bus, piix3_set_irq, pci_slot_get_pirq,
> +                     piix3, PIIX_NUM_PIRQS);
> +        pci_bus_set_route_irq_fn(pci_bus,
> piix3_route_intx_pin_to_irq);
> +    }
> +    *isa_bus = ISA_BUS(qdev_get_child_bus(DEVICE(piix3), "isa.0"));
> +
> +    return piix3;
> +}
> +
>  PCIBus *i440fx_init(const char *host_type, const char *pci_type,
>                      PCII440FXState **pi440fx_state,
>                      int *piix3_devfn,
> @@ -400,27 +430,8 @@ PCIBus *i440fx_init(const char *host_type, const
> char *pci_type,
>                   PAM_EXPAN_SIZE);
>      }
>  
> -    /* Xen supports additional interrupt routes from the PCI devices
> to
> -     * the IOAPIC: the four pins of each PCI device on the bus are
> also
> -     * connected to the IOAPIC directly.
> -     * These additional routes can be discovered through ACPI. */
> -    if (xen_enabled()) {
> -        PCIDevice *pci_dev = pci_create_simple_multifunction(b,
> -                             -1, true, TYPE_PIIX3_XEN_DEVICE);
> -        piix3 = PIIX3_PCI_DEVICE(pci_dev);
> -        pci_bus_irqs(b, xen_piix3_set_irq, xen_pci_slot_get_pirq,
> -                piix3, XEN_PIIX_NUM_PIRQS);
> -    } else {
> -        PCIDevice *pci_dev = pci_create_simple_multifunction(b,
> -                             -1, true, TYPE_PIIX3_DEVICE);
> -        piix3 = PIIX3_PCI_DEVICE(pci_dev);
> -        pci_bus_irqs(b, piix3_set_irq, pci_slot_get_pirq, piix3,
> -                PIIX_NUM_PIRQS);
> -        pci_bus_set_route_irq_fn(b, piix3_route_intx_pin_to_irq);
> -    }
> +    piix3 = piix3_create(b, isa_bus);
>      piix3->pic = pic;
> -    *isa_bus = ISA_BUS(qdev_get_child_bus(DEVICE(piix3), "isa.0"));
> -
>      *piix3_devfn = piix3->dev.devfn;
>  
>      ram_size = ram_size / 8 / 1024 / 1024;
Reviewed-by: Esteban Bosse <estebanbosse@xxxxxxxxx>


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel