|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH v4 6/8] xen/arm64: head: Use a page mapping for the 1:1 mapping in create_page_tables()
On Tue, 17 Sep 2019, Julien Grall wrote:
> At the moment the function create_page_tables() will use 1GB/2MB
> mapping for the identity mapping. As we don't know what is present
> before and after Xen in memory, we may end up to map
> device/reserved-memory with cacheable memory. This may result to
> mismatched attributes as other users may access the same region
> differently.
>
> To prevent any issues, we should only map the strict minimum in the
> 1:1 mapping. A check in xen.lds.S already guarantees anything
> necessary for turning on the MMU fits in a page (at the moment 4K).
>
> As only one page will be mapped for the 1:1 mapping, it is necessary
> to pre-allocate a page for the 3rd level table.
>
> Signed-off-by: Julien Grall <julien.grall@xxxxxxx>
Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx>
> ---
> Changes in v4:
> - Don't pre-link the page-tables for the 1:1 mapping. Instead
> only link what's necessary.
>
> Changes in v3:
> - Patch added
> ---
> xen/arch/arm/arm64/head.S | 166
> ++++++++++++++++++----------------------------
> xen/arch/arm/mm.c | 2 +
> 2 files changed, 68 insertions(+), 100 deletions(-)
>
> diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S
> index 2cce342217..e5015f93a2 100644
> --- a/xen/arch/arm/arm64/head.S
> +++ b/xen/arch/arm/arm64/head.S
> @@ -566,100 +566,17 @@ ENDPROC(cpu_init)
> * x19: paddr(start)
> * x20: phys offset
> *
> - * Clobbers x0 - x4, x25
> - *
> - * Register usage within this function:
> - * x25: Identity map in place
> + * Clobbers x0 - x4
> */
> create_page_tables:
> - /*
> - * If Xen is loaded at exactly XEN_VIRT_START then we don't
> - * need an additional 1:1 mapping, the virtual mapping will
> - * suffice.
> - */
> - cmp x19, #XEN_VIRT_START
> - cset x25, eq /* x25 := identity map in place, or not
> */
> -
> - load_paddr x4, boot_pgtable
> -
> - /* Setup boot_pgtable: */
> - load_paddr x1, boot_first
> -
> - /* ... map boot_first in boot_pgtable[0] */
> - mov x3, #PT_PT /* x2 := table map of boot_first */
> - orr x2, x1, x3 /* + rights for linear PT */
> - str x2, [x4, #0] /* Map it in slot 0 */
> -
> - /* ... map of paddr(start) in boot_pgtable+boot_first_id */
> - lsr x1, x19, #ZEROETH_SHIFT/* Offset of base paddr in boot_pgtable
> */
> - cbz x1, 1f /* It's in slot 0, map in boot_first
> - * or boot_second later on */
> + /* Prepare the page-tables for mapping Xen */
> + ldr x0, =XEN_VIRT_START
> + create_table_entry boot_pgtable, boot_first, x0, ZEROETH_SHIFT, x1,
> x2, x3
> + create_table_entry boot_first, boot_second, x0, FIRST_SHIFT, x1, x2,
> x3
> + create_table_entry boot_second, boot_third, x0, SECOND_SHIFT, x1,
> x2, x3
>
> - /*
> - * Level zero does not support superpage mappings, so we have
> - * to use an extra first level page in which we create a 1GB mapping.
> - */
> - load_paddr x2, boot_first_id
> -
> - mov x3, #PT_PT /* x2 := table map of boot_first_id */
> - orr x2, x2, x3 /* + rights for linear PT */
> - str x2, [x4, x1, lsl #3]
> -
> - load_paddr x4, boot_first_id
> -
> - lsr x1, x19, #FIRST_SHIFT /* x1 := Offset of base paddr in
> boot_first_id */
> - lsl x2, x1, #FIRST_SHIFT /* x2 := Base address for 1GB mapping */
> - mov x3, #PT_MEM /* x2 := Section map */
> - orr x2, x2, x3
> - and x1, x1, #LPAE_ENTRY_MASK /* x1 := Slot offset */
> - str x2, [x4, x1, lsl #3] /* Mapping of paddr(start) */
> - mov x25, #1 /* x25 := identity map now in place */
> -
> -1: /* Setup boot_first: */
> - load_paddr x4, boot_first /* Next level into boot_first */
> -
> - /* ... map boot_second in boot_first[0] */
> - load_paddr x1, boot_second
> - mov x3, #PT_PT /* x2 := table map of boot_second */
> - orr x2, x1, x3 /* + rights for linear PT */
> - str x2, [x4, #0] /* Map it in slot 0 */
> -
> - /* ... map of paddr(start) in boot_first */
> - cbnz x25, 1f /* x25 is set if already created */
> - lsr x2, x19, #FIRST_SHIFT /* x2 := Offset of base paddr in
> boot_first */
> - and x1, x2, #LPAE_ENTRY_MASK /* x1 := Slot to use */
> - cbz x1, 1f /* It's in slot 0, map in boot_second */
> -
> - lsl x2, x2, #FIRST_SHIFT /* Base address for 1GB mapping */
> - mov x3, #PT_MEM /* x2 := Section map */
> - orr x2, x2, x3
> - str x2, [x4, x1, lsl #3] /* Create mapping of paddr(start)*/
> - mov x25, #1 /* x25 := identity map now in place */
> -
> -1: /* Setup boot_second: */
> - load_paddr x4, boot_second
> -
> - /* ... map boot_third in boot_second[1] */
> - load_paddr x1, boot_third
> - mov x3, #PT_PT /* x2 := table map of boot_third */
> - orr x2, x1, x3 /* + rights for linear PT */
> - str x2, [x4, #8] /* Map it in slot 1 */
> -
> - /* ... map of paddr(start) in boot_second */
> - cbnz x25, 1f /* x25 is set if already created */
> - lsr x2, x19, #SECOND_SHIFT /* x2 := Offset of base paddr in
> boot_second */
> - and x1, x2, #LPAE_ENTRY_MASK /* x1 := Slot to use */
> - cmp x1, #1
> - b.eq virtphys_clash /* It's in slot 1, which we cannot
> handle */
> -
> - lsl x2, x2, #SECOND_SHIFT /* Base address for 2MB mapping */
> - mov x3, #PT_MEM /* x2 := Section map */
> - orr x2, x2, x3
> - str x2, [x4, x1, lsl #3] /* Create mapping of paddr(start)*/
> - mov x25, #1 /* x25 := identity map now in place */
> -
> -1: /* Setup boot_third: */
> - load_paddr x4, boot_third
> + /* Map Xen */
> + adr_l x4, boot_third
>
> lsr x2, x19, #THIRD_SHIFT /* Base address for 4K mapping */
> lsl x2, x2, #THIRD_SHIFT
> @@ -674,21 +591,70 @@ create_page_tables:
> cmp x1, #(LPAE_ENTRIES<<3) /* 512 entries per page */
> b.lt 1b
>
> - /* Defer fixmap and dtb mapping until after paging enabled, to
> - * avoid them clashing with the 1:1 mapping. */
> + /*
> + * If Xen is loaded at exactly XEN_VIRT_START then we don't
> + * need an additional 1:1 mapping, the virtual mapping will
> + * suffice.
> + */
> + cmp x19, #XEN_VIRT_START
> + bne 1f
> + ret
> +1:
> + /*
> + * Setup the 1:1 mapping so we can turn the MMU on. Note that
> + * only the first page of Xen will be part of the 1:1 mapping.
> + */
> +
> + /*
> + * Find the zeroeth slot used. If the slot is not
> + * XEN_ZEROETH_SLOT, then the 1:1 mapping will use its own set of
> + * page-tables from the first level.
> + */
> + lsr x0, x19, #ZEROETH_SHIFT /* x0 := zeroeth slot */
> + cmp x0, #XEN_ZEROETH_SLOT
> + beq 1f
> + create_table_entry boot_pgtable, boot_first_id, x19, ZEROETH_SHIFT,
> x0, x1, x2
> + b link_from_first_id
> +
> +1:
> + /*
> + * Find the first slot used. If the slot is not XEN_FIRST_SLOT,
> + * then the 1:1 mapping will use its own set of page-tables from
> + * the second level.
> + */
> + lsr x0, x19, #FIRST_SHIFT
> + and x0, x0, #LPAE_ENTRY_MASK /* x0 := first slot */
> + cmp x0, #XEN_FIRST_SLOT
> + beq 1f
> + create_table_entry boot_first, boot_second_id, x19, FIRST_SHIFT, x0,
> x1, x2
> + b link_from_second_id
>
> - /* boot pagetable setup complete */
> +1:
> + /*
> + * Find the second slot used. If the slot is XEN_SECOND_SLOT, then
> the
> + * 1:1 mapping will use its own set of page-tables from the
> + * third level. For slot XEN_SECOND_SLOT, Xen is not yet able to
> handle
> + * it.
> + */
> + lsr x0, x19, #SECOND_SHIFT
> + and x0, x0, #LPAE_ENTRY_MASK /* x0 := first slot */
> + cmp x0, #XEN_SECOND_SLOT
> + beq virtphys_clash
> + create_table_entry boot_second, boot_third_id, x19, SECOND_SHIFT,
> x0, x1, x2
> + b link_from_third_id
> +
> +link_from_first_id:
> + create_table_entry boot_first_id, boot_second_id, x19, FIRST_SHIFT,
> x0, x1, x2
> +link_from_second_id:
> + create_table_entry boot_second_id, boot_third_id, x19, SECOND_SHIFT,
> x0, x1, x2
> +link_from_third_id:
> + create_mapping_entry boot_third_id, x19, x19, x0, x1, x2
> + ret
>
> - cbnz x25, 1f /* Did we manage to create an identity
> mapping ? */
> - PRINT("Unable to build boot page tables - Failed to identity map
> Xen.\r\n")
> - b fail
> virtphys_clash:
> /* Identity map clashes with boot_third, which we cannot handle yet
> */
> PRINT("- Unable to build boot page tables - virt and phys addresses
> clash. -\r\n")
> b fail
> -
> -1:
> - ret
> ENDPROC(create_page_tables)
>
> /*
> diff --git a/xen/arch/arm/mm.c b/xen/arch/arm/mm.c
> index 65552da4ba..72ffea7472 100644
> --- a/xen/arch/arm/mm.c
> +++ b/xen/arch/arm/mm.c
> @@ -105,6 +105,8 @@ DEFINE_BOOT_PAGE_TABLE(boot_pgtable);
> #ifdef CONFIG_ARM_64
> DEFINE_BOOT_PAGE_TABLE(boot_first);
> DEFINE_BOOT_PAGE_TABLE(boot_first_id);
> +DEFINE_BOOT_PAGE_TABLE(boot_second_id);
> +DEFINE_BOOT_PAGE_TABLE(boot_third_id);
> #endif
> DEFINE_BOOT_PAGE_TABLE(boot_second);
> DEFINE_BOOT_PAGE_TABLE(boot_third);
> --
> 2.11.0
>
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |