[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] Latest development (master) Xen fails to boot on HP ProLiant DL20 GEN10


  • To: xen-devel@xxxxxxxxxxxxxxxxxxxx
  • From: Roman Shaposhnik <roman@xxxxxxxxxx>
  • Date: Tue, 24 Sep 2019 11:20:06 -0700
  • Delivery-date: Tue, 24 Sep 2019 18:20:24 +0000
  • List-id: Xen developer discussion <xen-devel.lists.xenproject.org>

Hi!

I'm a bit at a loss of what's happening here, but it seems that
the latest Xen from master fails to boot on HP ProLiant DL20
GEN10 server (same Xen boots fine on every other piece of
hardware in my lab).

There are absolutely no signs of what's going wrong with it.
It just stops at

(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kb, 2MB, 1GB
...
(XEN) Adding cpu 1 to runqueue 0
(XEN) mwait-idle: max C-state count of 8 reached
(XEN) Adding cpu 2 to runqueue 0
(XEN) mwait-idle: max C-state count of 8 reached

I guess the only clue is that your typical line of:

(XEN) Brought up X CPUs

never gets printed -- so perhaps there's something wonky
going on with CPU initialization.

Any advice on how to diagnose this further will be greatly appreciated.

Thanks,
Roman.

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.