[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH] xen/arm: setup: Relocate the Device-Tree later on in the boot



On Wed, 11 Sep 2019, Volodymyr Babchuk wrote:
> Hi Julien,
> 
> Julien Grall writes:
> 
> > At the moment, the Device-Tree is relocated into xenheap while setting
> > up the memory subsystem. This is actually not necessary because the
> > early mapping is still present and we don't require the virtual address
> > to be stable until unflatting the Device-Tree.
> >
> > So the relocation can safely be moved after the memory subsystem is
> > fully setup. This has the nice advantage to make the relocation common
> > and let the xenheap allocator decides where to put it.
> >
> > Lastly, the device-tree is not going to be used for ACPI system. So
> > there are no need to relocate it and can just be discarded.
> >
> > Signed-off-by: Julien Grall <julien.grall@xxxxxxx>
> Reviewed-by: Volodymyr Babchuk <volodymyr_babchuk@xxxxxxxx>

Acked-by: Stefano Stabellini <sstabellini@xxxxxxxxxx>

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.