>From ff0af4d3d332a4b7b1b9b7edd4dbd1b3a263cb70 Mon Sep 17 00:00:00 2001 From: Oleksandr Tyshchenko Date: Thu, 15 Aug 2019 16:56:04 +0300 Subject: [PATCH] iommu/arm: Add ability to handle deferred probing request This patch adds minimal required support to General IOMMU framework to be able to handle a case when IOMMU driver requesting deferred probing for a device. In order not to pull Linux's error code (-EPROBE_DEFER) to Xen we have chosen -EAGAIN to be used for indicating that device probing is deferred. This is needed for the upcoming IPMMU driver which may request deferred probing depending on what device will be probed the first (there is some dependency between these devices, Root device must be registered before Cache devices. If not the case, driver will deny further Cache device probes until Root device is registered). As we can't guarantee a fixed pre-defined order for the device nodes in DT, we need to be ready for the situation where devices being probed in "any" order. While here, order the headers alphabetically. Signed-off-by: Oleksandr Tyshchenko --- Changes V2 -> V3: - removed deferred_probe field from struct dt_device_node, re-used domain_list instead - documented domain_list usage - added ASSERT to check that np->domain_list is empty before re-using it - put deferred_probe_list to init section - used more strict logic regarding processing devices in the deferred list - added more comments to code - put headers in alphabetical order --- xen/drivers/passthrough/arm/iommu.c | 55 ++++++++++++++++++++++++++++++++++--- xen/include/asm-arm/device.h | 6 +++- xen/include/xen/device_tree.h | 7 +++++ 3 files changed, 63 insertions(+), 5 deletions(-) diff --git a/xen/drivers/passthrough/arm/iommu.c b/xen/drivers/passthrough/arm/iommu.c index f8bb2c3..8569d2e 100644 --- a/xen/drivers/passthrough/arm/iommu.c +++ b/xen/drivers/passthrough/arm/iommu.c @@ -15,11 +15,20 @@ * GNU General Public License for more details. */ -#include -#include #include +#include +#include + #include +/* + * Deferred probe list is used to keep track of devices for which driver + * requested deferred probing (returned -EAGAIN). + * + * We re-use device's domain_list to link the device in the deferred list. + */ +static __initdata LIST_HEAD(deferred_probe_list); + static const struct iommu_ops *iommu_ops; const struct iommu_ops *iommu_get_ops(void) @@ -42,7 +51,7 @@ void __init iommu_set_ops(const struct iommu_ops *ops) int __init iommu_hardware_setup(void) { - struct dt_device_node *np; + struct dt_device_node *np, *tmp; int rc; unsigned int num_iommus = 0; @@ -51,6 +60,17 @@ int __init iommu_hardware_setup(void) rc = device_init(np, DEVICE_IOMMU, NULL); if ( !rc ) num_iommus++; + else if ( rc == -EAGAIN ) + { + /* We expect nobody uses domain_list at such early stage. */ + ASSERT(list_empty(&np->domain_list)); + + /* + * Driver requested deferred probing, so add this device to + * the deferred list for further processing. + */ + list_add(&np->domain_list, &deferred_probe_list); + } /* * Ignore the following error codes: * - EBADF: Indicate the current is not an IOMMU @@ -60,7 +80,34 @@ int __init iommu_hardware_setup(void) return rc; } - return ( num_iommus > 0 ) ? 0 : -ENODEV; + rc = ( num_iommus > 0 ) ? 0 : -ENODEV; + + /* + * Process devices in the deferred list if it is not empty and at least one + * successfully probed device is present. Check that at least one device + * is added at each loop, otherwise we may get an infinite loop. Also stop + * processing if we got an error other than -EAGAIN. + */ + while ( !list_empty(&deferred_probe_list) && num_iommus ) + { + num_iommus = 0; + + list_for_each_entry_safe ( np, tmp, &deferred_probe_list, domain_list ) + { + rc = device_init(np, DEVICE_IOMMU, NULL); + if ( !rc ) + { + num_iommus++; + + /* Remove successfully probed device from the deferred list. */ + list_del_init(&np->domain_list); + } + else if ( rc != -EAGAIN ) + return rc; + } + } + + return rc; } void __hwdom_init arch_iommu_check_autotranslated_hwdom(struct domain *d) diff --git a/xen/include/asm-arm/device.h b/xen/include/asm-arm/device.h index 63a0f36..ee1c3bc 100644 --- a/xen/include/asm-arm/device.h +++ b/xen/include/asm-arm/device.h @@ -44,7 +44,11 @@ struct device_desc { enum device_class class; /* List of devices supported by this driver */ const struct dt_device_match *dt_match; - /* Device initialization */ + /* + * Device initialization. + * + * -EAGAIN is used to indicate that device probing is deferred. + */ int (*init)(struct dt_device_node *dev, const void *data); }; diff --git a/xen/include/xen/device_tree.h b/xen/include/xen/device_tree.h index e1ec6cb..60ae99c 100644 --- a/xen/include/xen/device_tree.h +++ b/xen/include/xen/device_tree.h @@ -92,6 +92,13 @@ struct dt_device_node { /* IOMMU specific fields */ bool is_protected; + /* + * The main purpose of this list node is to link the structure in the list + * of devices assigned to domain. + * + * Boot code (iommu_hardware_setup) re-uses this list to link the structure + * in the list of devices for which driver requested deferred probing. + */ struct list_head domain_list; struct device dev; -- 2.7.4