[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [livepatch: independ. modules v2 2/3] livepatch: Allow to override inter-modules buildid dependency



Hi,

Something looks fishy in the threading:

  - The patch #1 is answered in reply-to the patch #1 of version 1.
  - This patch (#2) is answered in reply-to the patch #2 of version 1.
  - The patch #3 is labeled as v3 an in reply-to the patch #3 of version 1.

If you send them as series, then they should be sent together for a new version and in a new thread. Not mangled to the previous thread as this makes quite difficult to follow what's going on.

Also it looks like the series is still lacking of the cover letter. So I still have no clue what "livepatch: independ. modules" in your [...] refers to.

Cheers,

On 20/08/2019 14:28, Pawel Wieczorkiewicz wrote:
By default Livepatch enforces the following buildid-based dependency
chain between hotpatch modules:
   1) first module depends on given hypervisor buildid
   2) every consecutive module depends on previous module's buildid
This way proper hotpatch stack order is maintained and enforced.
While it is important for production hotpatches it limits agility and
blocks usage of testing or debug hotpatches. These kinds of hotpatch
modules are typically expected to be loaded at any time irrespective
of current state of the modules stack.

To enable testing and debug hotpatches allow user dynamically ignore
the inter-modules dependency. In this case only hypervisor buildid
match is verified and enforced.

To allow userland pass additional paremeters for livepatch actions
add support for action flags.
Each of the apply, revert, unload and revert action gets additional
64-bit parameter 'flags' where extra flags can be applied in a mask
form.
Initially only one flag '--nodeps' is added for the apply action.
This flag modifies the default buildid dependency check as described
above.
The global sysctl interface input flag parameter is defined with a
single corresponding flag macro:
   LIVEPATCH_ACTION_APPLY_NODEPS (1 << 0)

The userland xen-livepatch tool is modified to support the '--nodeps'
flag for apply and load commands. A general mechanism for specifying
more flags in the future for apply and other action is however added.

Signed-off-by: Pawel Wieczorkiewicz <wipawel@xxxxxxxxx>
Reviewed-by: Andra-Irina Paraschiv <andraprs@xxxxxxxxxx>
Reviewed-by: Eslam Elnikety <elnikety@xxxxxxxxx>
Reviewed-by: Petre Eftime <epetre@xxxxxxxxxx>
Reviewed-by: Leonard Foerster <foersleo@xxxxxxxxx>
Reviewed-by: Martin Pohlack <mpohlack@xxxxxxxxx>
Reviewed-by: Norbert Manthey <nmanthey@xxxxxxxxx>
---
v2:
* Bump XEN_SYSCTL_INTERFACE_VERSION to 0x00000013
---
  tools/libxc/include/xenctrl.h |   9 ++--
  tools/libxc/xc_misc.c         |  20 +++----
  tools/misc/xen-livepatch.c    | 121 +++++++++++++++++++++++++++++++++++-------
  xen/common/livepatch.c        |  14 +++--
  xen/include/public/sysctl.h   |  11 +++-
  5 files changed, 139 insertions(+), 36 deletions(-)

diff --git a/tools/libxc/include/xenctrl.h b/tools/libxc/include/xenctrl.h
index 0ff6ed9e70..725697c132 100644
--- a/tools/libxc/include/xenctrl.h
+++ b/tools/libxc/include/xenctrl.h
@@ -2607,11 +2607,12 @@ int xc_livepatch_list(xc_interface *xch, unsigned int 
max, unsigned int start,
   * to complete them. The `timeout` offers an option to expire the
   * operation if it could not be completed within the specified time
   * (in ns). Value of 0 means let hypervisor decide the best timeout.
+ * The `flags` allows to pass extra parameters to the actions.
   */
-int xc_livepatch_apply(xc_interface *xch, char *name, uint32_t timeout);
-int xc_livepatch_revert(xc_interface *xch, char *name, uint32_t timeout);
-int xc_livepatch_unload(xc_interface *xch, char *name, uint32_t timeout);
-int xc_livepatch_replace(xc_interface *xch, char *name, uint32_t timeout);
+int xc_livepatch_apply(xc_interface *xch, char *name, uint32_t timeout, 
uint64_t flags);
+int xc_livepatch_revert(xc_interface *xch, char *name, uint32_t timeout, 
uint64_t flags);
+int xc_livepatch_unload(xc_interface *xch, char *name, uint32_t timeout, 
uint64_t flags);
+int xc_livepatch_replace(xc_interface *xch, char *name, uint32_t timeout, 
uint64_t flags);
/*
   * Ensure cache coherency after memory modifications. A call to this function
diff --git a/tools/libxc/xc_misc.c b/tools/libxc/xc_misc.c
index 8e60b6e9f0..a8e9e7d1e2 100644
--- a/tools/libxc/xc_misc.c
+++ b/tools/libxc/xc_misc.c
@@ -854,7 +854,8 @@ int xc_livepatch_list(xc_interface *xch, unsigned int max, 
unsigned int start,
  static int _xc_livepatch_action(xc_interface *xch,
                                  char *name,
                                  unsigned int action,
-                                uint32_t timeout)
+                                uint32_t timeout,
+                                uint64_t flags)
  {
      int rc;
      DECLARE_SYSCTL;
@@ -880,6 +881,7 @@ static int _xc_livepatch_action(xc_interface *xch,
      sysctl.u.livepatch.pad = 0;
      sysctl.u.livepatch.u.action.cmd = action;
      sysctl.u.livepatch.u.action.timeout = timeout;
+    sysctl.u.livepatch.u.action.flags = flags;
sysctl.u.livepatch.u.action.name = def_name;
      set_xen_guest_handle(sysctl.u.livepatch.u.action.name.name, name);
@@ -891,24 +893,24 @@ static int _xc_livepatch_action(xc_interface *xch,
      return rc;
  }
-int xc_livepatch_apply(xc_interface *xch, char *name, uint32_t timeout)
+int xc_livepatch_apply(xc_interface *xch, char *name, uint32_t timeout, 
uint64_t flags)
  {
-    return _xc_livepatch_action(xch, name, LIVEPATCH_ACTION_APPLY, timeout);
+    return _xc_livepatch_action(xch, name, LIVEPATCH_ACTION_APPLY, timeout, 
flags);
  }
-int xc_livepatch_revert(xc_interface *xch, char *name, uint32_t timeout)
+int xc_livepatch_revert(xc_interface *xch, char *name, uint32_t timeout, 
uint64_t flags)
  {
-    return _xc_livepatch_action(xch, name, LIVEPATCH_ACTION_REVERT, timeout);
+    return _xc_livepatch_action(xch, name, LIVEPATCH_ACTION_REVERT, timeout, 
flags);
  }
-int xc_livepatch_unload(xc_interface *xch, char *name, uint32_t timeout)
+int xc_livepatch_unload(xc_interface *xch, char *name, uint32_t timeout, 
uint64_t flags)
  {
-    return _xc_livepatch_action(xch, name, LIVEPATCH_ACTION_UNLOAD, timeout);
+    return _xc_livepatch_action(xch, name, LIVEPATCH_ACTION_UNLOAD, timeout, 
flags);
  }
-int xc_livepatch_replace(xc_interface *xch, char *name, uint32_t timeout)
+int xc_livepatch_replace(xc_interface *xch, char *name, uint32_t timeout, 
uint64_t flags)
  {
-    return _xc_livepatch_action(xch, name, LIVEPATCH_ACTION_REPLACE, timeout);
+    return _xc_livepatch_action(xch, name, LIVEPATCH_ACTION_REPLACE, timeout, 
flags);
  }
/*
diff --git a/tools/misc/xen-livepatch.c b/tools/misc/xen-livepatch.c
index 3233472157..a37b2457ff 100644
--- a/tools/misc/xen-livepatch.c
+++ b/tools/misc/xen-livepatch.c
@@ -23,18 +23,23 @@ void show_help(void)
  {
      fprintf(stderr,
              "xen-livepatch: live patching tool\n"
-            "Usage: xen-livepatch <command> [args]\n"
+            "Usage: xen-livepatch <command> [args] [command-flags]\n"
              " <name> An unique name of payload. Up to %d characters.\n"
              "Commands:\n"
              "  help                   display this help\n"
              "  upload <name> <file>   upload file <file> with <name> name\n"
              "  list                   list payloads uploaded.\n"
-            "  apply <name>           apply <name> patch.\n"
+            "  apply <name> [flags]   apply <name> patch.\n"
+            "    Supported flags:\n"
+            "      --nodeps           Disable inter-module buildid dependency 
check.\n"
+            "                         Check only against hypervisor buildid.\n"
              "  revert <name>          revert name <name> patch.\n"
              "  replace <name>         apply <name> patch and revert all 
others.\n"
              "  unload <name>          unload name <name> patch.\n"
-            "  load  <file>           upload and apply <file>.\n"
-            "                         name is the <file> name\n",
+            "  load <file> [flags]    upload and apply <file> with name as the 
<file> name\n"
+            "    Supported flags:\n"
+            "      --nodeps           Disable inter-module buildid dependency 
check.\n"
+            "                         Check only against hypervisor 
buildid.\n",
              XEN_LIVEPATCH_NAME_SIZE);
  }
@@ -225,12 +230,13 @@ static int upload_func(int argc, char *argv[])
      return rc;
  }
-/* These MUST match to the 'action_options[]' array slots. */
+/* These MUST match to the 'action_options[]' and 'flag_options[]' array 
slots. */
  enum {
      ACTION_APPLY = 0,
      ACTION_REVERT = 1,
      ACTION_UNLOAD = 2,
      ACTION_REPLACE = 3,
+    ACTION_NUM
  };
struct {
@@ -238,7 +244,7 @@ struct {
      int expected; /* The state to be in after the function. */
      const char *name;
      const char *verb;
-    int (*function)(xc_interface *xch, char *name, uint32_t timeout);
+    int (*function)(xc_interface *xch, char *name, uint32_t timeout, uint64_t 
flags);
  } action_options[] = {
      {   .allow = LIVEPATCH_STATE_CHECKED,
          .expected = LIVEPATCH_STATE_APPLIED,
@@ -266,6 +272,66 @@ struct {
      },
  };
+/*
+ * This structure defines supported flag options for actions.
+ * It defines entries for each action and supports up to 64
+ * flags per action.
+ */
+struct {
+    const char *name;
+    const uint64_t flag;
+} flag_options[ACTION_NUM][8 * sizeof(uint64_t)] = {
+    { /* ACTION_APPLY */
+        {   .name = "--nodeps",
+            .flag = LIVEPATCH_ACTION_APPLY_NODEPS,
+        },
+    },
+    { /* ACTION_REVERT */
+    },
+    { /* ACTION_UNLOAD */
+    },
+    { /* ACTION_REPLACE */
+    }
+};
+
+/*
+ * Parse user provided action flags.
+ * This function expects to only receive an array of input parameters being 
flags.
+ * Expected action is specified via idx paramater (index of flag_options[]).
+ */
+static int get_flags(int argc, char *argv[], unsigned int idx, uint64_t *flags)
+{
+    int i, j;
+
+    if ( !flags || idx >= ARRAY_SIZE(flag_options) )
+        return -1;
+
+    *flags = 0;
+    for ( i = 0; i < argc; i++ )
+    {
+        for ( j = 0; j < ARRAY_SIZE(flag_options[idx]); j++ )
+        {
+            if ( !flag_options[idx][j].name )
+                goto error;
+
+            if ( !strcmp(flag_options[idx][j].name, argv[i]) )
+            {
+                *flags |= flag_options[idx][j].flag;
+                break;
+            }
+        }
+
+        if ( j == ARRAY_SIZE(flag_options[idx]) )
+            goto error;
+    }
+
+    return 0;
+error:
+    fprintf(stderr, "Unsupported flag: %s.\n", argv[i]);
+    errno = EINVAL;
+    return errno;
+}
+
  /* The hypervisor timeout for the live patching operation is 30 msec,
   * but it could take some time for the operation to start, so wait twice
   * that period. */
@@ -291,8 +357,9 @@ int action_func(int argc, char *argv[], unsigned int idx)
      char name[XEN_LIVEPATCH_NAME_SIZE];
      int rc;
      xen_livepatch_status_t status;
+    uint64_t flags;
- if ( argc != 1 )
+    if ( argc < 1 )
      {
          show_help();
          return -1;
@@ -301,7 +368,10 @@ int action_func(int argc, char *argv[], unsigned int idx)
      if ( idx >= ARRAY_SIZE(action_options) )
          return -1;
- if ( get_name(argc, argv, name) )
+    if ( get_name(argc--, argv++, name) )
+        return EINVAL;
+
+    if ( get_flags(argc, argv, idx, &flags) )
          return EINVAL;
/* Check initial status. */
@@ -332,7 +402,7 @@ int action_func(int argc, char *argv[], unsigned int idx)
      if ( action_options[idx].allow & status.state )
      {
          printf("%s %s... ", action_options[idx].verb, name);
-        rc = action_options[idx].function(xch, name, HYPERVISOR_TIMEOUT_NS);
+        rc = action_options[idx].function(xch, name, HYPERVISOR_TIMEOUT_NS, 
flags);
          if ( rc )
          {
              int saved_errno = errno;
@@ -394,17 +464,23 @@ int action_func(int argc, char *argv[], unsigned int idx)
static int load_func(int argc, char *argv[])
  {
-    int rc;
-    char *new_argv[2];
-    char *path, *name, *lastdot;
+    int i, rc = ENOMEM;
+    char *upload_argv[2];
+    char **apply_argv, *path, *name, *lastdot;
- if ( argc != 1 )
+    if ( argc < 1 )
      {
          show_help();
          return -1;
      }
+
+    /* apply action has <id> [flags] input requirement, which must be 
constructed */
+    apply_argv = (char **) malloc(argc * sizeof(*apply_argv));
+    if ( !apply_argv )
+        return rc;
+
      /* <file> */
-    new_argv[1] = argv[0];
+    upload_argv[1] = argv[0];
/* Synthesize the <id> */
      path = strdup(argv[0]);
@@ -413,16 +489,23 @@ static int load_func(int argc, char *argv[])
      lastdot = strrchr(name, '.');
      if ( lastdot != NULL )
          *lastdot = '\0';
-    new_argv[0] = name;
+    upload_argv[0] = name;
+    apply_argv[0] = name;
- rc = upload_func(2 /* <id> <file> */, new_argv);
+    /* Fill in all user provided flags */
+    for ( i = 0; i < argc - 1; i++ )
+        apply_argv[i + 1] = argv[i + 1];
+
+    rc = upload_func(2 /* <id> <file> */, upload_argv);
      if ( rc )
-        return rc;
+        goto error;
- rc = action_func(1 /* only <id> */, new_argv, ACTION_APPLY);
+    rc = action_func(argc, apply_argv, ACTION_APPLY);
      if ( rc )
-        action_func(1, new_argv, ACTION_UNLOAD);
+        action_func(1 /* only <id> */, upload_argv, ACTION_UNLOAD);
+error:
+    free(apply_argv);
      free(path);
      return rc;
  }
diff --git a/xen/common/livepatch.c b/xen/common/livepatch.c
index 6a4af6ce57..fb91d5095c 100644
--- a/xen/common/livepatch.c
+++ b/xen/common/livepatch.c
@@ -1575,9 +1575,17 @@ static int livepatch_action(struct 
xen_sysctl_livepatch_action *action)
                  break;
              }
- rc = build_id_dep(data, !!list_empty(&applied_list));
-            if ( rc )
-                break;
+            /*
+             * Check if action is issued with nodeps flags to ignore module
+             * stack dependencies.
+             */
+            if ( !(action->flags & LIVEPATCH_ACTION_APPLY_NODEPS) )
+            {
+                rc = build_id_dep(data, !!list_empty(&applied_list));
+                if ( rc )
+                    break;
+            }
+
              data->rc = -EAGAIN;
              rc = schedule_work(data, action->cmd, action->timeout);
          }
diff --git a/xen/include/public/sysctl.h b/xen/include/public/sysctl.h
index 91c48dcae0..1b2b165a6d 100644
--- a/xen/include/public/sysctl.h
+++ b/xen/include/public/sysctl.h
@@ -35,7 +35,7 @@
  #include "domctl.h"
  #include "physdev.h"
-#define XEN_SYSCTL_INTERFACE_VERSION 0x00000012
+#define XEN_SYSCTL_INTERFACE_VERSION 0x00000013
/*
   * Read console content from Xen buffer ring.
@@ -956,6 +956,15 @@ struct xen_sysctl_livepatch_action {
                                              /* hypervisor default. */
                                              /* Or upper bound of time (ns) */
                                              /* for operation to take. */
+
+/*
+ * Overwrite default inter-module buildid dependency chain enforcement.
+ * Check only if module is built for given hypervisor by comparing buildid.
+ */
+#define LIVEPATCH_ACTION_APPLY_NODEPS (1 << 0)
+    uint64_t flags;                         /* IN: action flags. */
+                                            /* Provide additional parameters */
+                                            /* for an action. */
  };
struct xen_sysctl_livepatch_op {


--
Julien Grall

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.