[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH V2 0/6] iommu/arm: Add Renesas IPMMU-VMSA support + Linux's iommu_fwspec
From: Oleksandr Tyshchenko <oleksandr_tyshchenko@xxxxxxxx> The purpose of this patch series is to add IPMMU-VMSA support to Xen on ARM. Besides new IOMMU driver, this series contains "iommu_fwspec" support and new API iommu_add_dt_device() for adding DT device to IOMMU. The IPMMU-VMSA is VMSA-compatible I/O Memory Management Unit (IOMMU) which provides address translation and access protection functionalities to processing units and interconnect networks. Please note, this driver is supposed to work only with newest Gen3 SoCs revisions which IPMMU hardware supports stage 2 translation table format and is able to use CPU's P2M table as is if one is 3-level page table (up to 40 bit IPA). ---------- This driver is based on Linux's IPMMU-VMSA driver from Renesas BSP: https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas-bsp.git/tree/drivers/iommu/ipmmu-vmsa.c?h=v4.14.75-ltsi/rcar-3.9.6 and Xen's SMMU driver: xen/drivers/passthrough/arm/smmu.c Although Xen driver has a lot in common with Linux driver, it is not a "direct ported" copy and should be treated as such. The major differences compare to the Linux driver are: 1. Stage 1/Stage 2 translation. Linux driver supports Stage 1 translation only (with Stage 1 translation table format). It manages page table by itself. But Xen driver supports Stage 2 translation (with Stage 2 translation table format) to be able to share the P2M with the CPU. Stage 1 translation is always bypassed in Xen driver. So, Xen driver is supposed to be used with newest Gen3 SoC revisions only (H3 ES3.0, M3 ES3.0, etc.) which IPMMU H/W supports stage 2 translation table format. 2. AArch64 support. Linux driver uses VMSAv8-32 mode, while Xen driver enables Armv8 VMSAv8-64 mode to cover up to 40 bit input address. 3. Context bank (sets of page table) usage. In Xen, each context bank is mapped to one Xen domain. So, all devices being pass throughed to the same Xen domain share the same context bank. ---------- Driver was tested on Gen3 H3 ES3.0 based boards using current staging (7d1460c xen/arm: optee: fix compilation with GCC 4.8) in a system with several DMA masters being assigned to different guest domains. You can find it here: repo: https://github.com/otyshchenko1/xen.git branch: ipmmu_upstream2 You can find previous discussions here: [V1] https://lists.xenproject.org/archives/html/xen-devel/2019-06/msg01755.html Oleksandr Tyshchenko (6): iommu/arm: Add iommu_helpers.c file to keep common for IOMMUs stuff iommu/arm: Add ability to handle deferred probing request [RFC] xen/common: Introduce _xrealloc function iommu/arm: Add lightweight iommu_fwspec support iommu/arm: Introduce iommu_add_dt_device API iommu/arm: Add Renesas IPMMU-VMSA support xen/arch/arm/domain_build.c | 12 + xen/arch/arm/platforms/Kconfig | 1 + xen/common/device_tree.c | 1 + xen/common/xmalloc_tlsf.c | 21 + xen/drivers/passthrough/Kconfig | 13 + xen/drivers/passthrough/arm/Makefile | 3 +- xen/drivers/passthrough/arm/iommu.c | 80 +- xen/drivers/passthrough/arm/iommu_fwspec.c | 91 ++ xen/drivers/passthrough/arm/iommu_helpers.c | 78 ++ xen/drivers/passthrough/arm/ipmmu-vmsa.c | 1342 +++++++++++++++++++++++++++ xen/drivers/passthrough/arm/smmu.c | 48 +- xen/include/asm-arm/device.h | 7 +- xen/include/asm-arm/iommu.h | 12 + xen/include/asm-arm/iommu_fwspec.h | 65 ++ xen/include/xen/device_tree.h | 1 + xen/include/xen/xmalloc.h | 1 + 16 files changed, 1727 insertions(+), 49 deletions(-) create mode 100644 xen/drivers/passthrough/arm/iommu_fwspec.c create mode 100644 xen/drivers/passthrough/arm/iommu_helpers.c create mode 100644 xen/drivers/passthrough/arm/ipmmu-vmsa.c create mode 100644 xen/include/asm-arm/iommu_fwspec.h -- 2.7.4 _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |