[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH MM-PART1 v3 3/8] xen/arm: Remove flush_xen_text_tlb_local()



On Tue, 14 May 2019, Julien Grall wrote:
> The function flush_xen_text_tlb_local() has been misused and will result
> to invalidate the instruction cache more than necessary.
> 
> For instance, there is no need to invalidate the instruction cache if
> we are setting SCTLR_EL2.WXN.
> 
> There is effectively only one caller (i.e free_init_memory() who would
> need to invalidate the instruction cache.
> 
> So rather than keeping around the function flush_xen_text_tlb_local()
> replace it with call to flush_xen_tlb_local() and explicitely flush
                                                    ^ explicitly

> the cache when necessary.
> 
> Signed-off-by: Julien Grall <julien.grall@xxxxxxx>
> Reviewed-by: Andrii Anisov <andrii_anisov@xxxxxxxx>

Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx>


> ---
>     Changes in v3:
>         - Fix typoes
> 
>     Changes in v2:
>         - Add Andrii's reviewed-by
> ---
>  xen/arch/arm/mm.c                | 17 ++++++++++++++---
>  xen/include/asm-arm/arm32/page.h | 23 +++++++++--------------
>  xen/include/asm-arm/arm64/page.h | 21 +++++----------------
>  3 files changed, 28 insertions(+), 33 deletions(-)
> 
> diff --git a/xen/arch/arm/mm.c b/xen/arch/arm/mm.c
> index 93ad118183..dfbe39c70a 100644
> --- a/xen/arch/arm/mm.c
> +++ b/xen/arch/arm/mm.c
> @@ -610,8 +610,12 @@ void __init remove_early_mappings(void)
>  static void xen_pt_enforce_wnx(void)
>  {
>      WRITE_SYSREG32(READ_SYSREG32(SCTLR_EL2) | SCTLR_WXN, SCTLR_EL2);
> -    /* Flush everything after setting WXN bit. */
> -    flush_xen_text_tlb_local();
> +    /*
> +     * The TLBs may cache SCTLR_EL2.WXN. So ensure it is synchronized
> +     * before flushing the TLBs.
> +     */
> +    isb();
> +    flush_xen_data_tlb_local();
>  }
>  
>  extern void switch_ttbr(uint64_t ttbr);
> @@ -1123,7 +1127,7 @@ static void set_pte_flags_on_range(const char *p, 
> unsigned long l, enum mg mg)
>          }
>          write_pte(xen_xenmap + i, pte);
>      }
> -    flush_xen_text_tlb_local();
> +    flush_xen_data_tlb_local();
>  }
>  
>  /* Release all __init and __initdata ranges to be reused */
> @@ -1136,6 +1140,13 @@ void free_init_memory(void)
>      uint32_t *p;
>  
>      set_pte_flags_on_range(__init_begin, len, mg_rw);
> +
> +    /*
> +     * From now on, init will not be used for execution anymore,
> +     * so nuke the instruction cache to remove entries related to init.
> +     */
> +    invalidate_icache_local();
> +
>  #ifdef CONFIG_ARM_32
>      /* udf instruction i.e (see A8.8.247 in ARM DDI 0406C.c) */
>      insn = 0xe7f000f0;
> diff --git a/xen/include/asm-arm/arm32/page.h 
> b/xen/include/asm-arm/arm32/page.h
> index ea4b312c70..40a77daa9d 100644
> --- a/xen/include/asm-arm/arm32/page.h
> +++ b/xen/include/asm-arm/arm32/page.h
> @@ -46,24 +46,19 @@ static inline void invalidate_icache(void)
>  }
>  
>  /*
> - * Flush all hypervisor mappings from the TLB and branch predictor of
> - * the local processor.
> - *
> - * This is needed after changing Xen code mappings.
> - *
> - * The caller needs to issue the necessary DSB and D-cache flushes
> - * before calling flush_xen_text_tlb.
> + * Invalidate all instruction caches on the local processor to PoU.
> + * We also need to flush the branch predictor for ARMv7 as it may be
> + * architecturally visible to the software (see B2.2.4 in ARM DDI 0406C.b).
>   */
> -static inline void flush_xen_text_tlb_local(void)
> +static inline void invalidate_icache_local(void)
>  {
>      asm volatile (
> -        "isb;"                        /* Ensure synchronization with 
> previous changes to text */
> -        CMD_CP32(TLBIALLH)            /* Flush hypervisor TLB */
> -        CMD_CP32(ICIALLU)             /* Flush I-cache */
> -        CMD_CP32(BPIALL)              /* Flush branch predictor */
> -        "dsb;"                        /* Ensure completion of TLB+BP flush */
> -        "isb;"
> +        CMD_CP32(ICIALLU)       /* Flush I-cache. */
> +        CMD_CP32(BPIALL)        /* Flush branch predictor. */
>          : : : "memory");
> +
> +    dsb(nsh);                   /* Ensure completion of the flush I-cache */
> +    isb();                      /* Synchronize fetched instruction stream. */
>  }
>  
>  /*
> diff --git a/xen/include/asm-arm/arm64/page.h 
> b/xen/include/asm-arm/arm64/page.h
> index 23d778154d..6c36d0210f 100644
> --- a/xen/include/asm-arm/arm64/page.h
> +++ b/xen/include/asm-arm/arm64/page.h
> @@ -37,23 +37,12 @@ static inline void invalidate_icache(void)
>      isb();
>  }
>  
> -/*
> - * Flush all hypervisor mappings from the TLB of the local processor.
> - *
> - * This is needed after changing Xen code mappings.
> - *
> - * The caller needs to issue the necessary DSB and D-cache flushes
> - * before calling flush_xen_text_tlb.
> - */
> -static inline void flush_xen_text_tlb_local(void)
> +/* Invalidate all instruction caches on the local processor to PoU */
> +static inline void invalidate_icache_local(void)
>  {
> -    asm volatile (
> -        "isb;"       /* Ensure synchronization with previous changes to text 
> */
> -        "tlbi   alle2;"                 /* Flush hypervisor TLB */
> -        "ic     iallu;"                 /* Flush I-cache */
> -        "dsb    sy;"                    /* Ensure completion of TLB flush */
> -        "isb;"
> -        : : : "memory");
> +    asm volatile ("ic iallu");
> +    dsb(nsh);               /* Ensure completion of the I-cache flush */
> +    isb();
>  }
>  
>  /*
> -- 
> 2.11.0
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.