[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [xen-unstable-smoke test] 134287: trouble: blocked/broken/pass



flight 134287 xen-unstable-smoke real [real]
http://logs.test-lab.xenproject.org/osstest/logs/134287/

Failures and problems with tests :-(

Tests which did not succeed and are blocking,
including tests which could not be run:
 build-arm64-xsm                 <job status>                 broken
 build-arm64-xsm               4 host-install(4)        broken REGR. vs. 133991

Tests which did not succeed, but are not blocking:
 test-arm64-arm64-xl-xsm       1 build-check(1)               blocked  n/a
 test-amd64-amd64-libvirt     13 migrate-support-check        fail   never pass
 test-armhf-armhf-xl          13 migrate-support-check        fail   never pass
 test-armhf-armhf-xl          14 saverestore-support-check    fail   never pass

version targeted for testing:
 xen                  a57a1b26ec0ae31f924cf2bbcf479637d007be44
baseline version:
 xen                  cb70a26f78848fe45f593f7ebc9cfaac760a791b

Last test of basis   133991  2019-03-22 15:00:46 Z   11 days
Failing since        134068  2019-03-25 12:00:51 Z    8 days   34 attempts
Testing same since   134287  2019-04-02 09:00:34 Z    0 days    1 attempts

------------------------------------------------------------
People who touched revisions under test:
  Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
  Christian Lindig <christian.lindig@xxxxxxxxxx>
  Jan Beulich <jbeulich@xxxxxxxx>
  Juergen Gross <jgross@xxxxxxxx>
  M A Young <m.a.young@xxxxxxxxxxxx>
  Wei Liu <wei.liu2@xxxxxxxxxx>

jobs:
 build-arm64-xsm                                              broken  
 build-amd64                                                  pass    
 build-armhf                                                  pass    
 build-amd64-libvirt                                          pass    
 test-armhf-armhf-xl                                          pass    
 test-arm64-arm64-xl-xsm                                      blocked 
 test-amd64-amd64-xl-qemuu-debianhvm-i386                     pass    
 test-amd64-amd64-libvirt                                     pass    


------------------------------------------------------------
sg-report-flight on osstest.test-lab.xenproject.org
logs: /home/logs/logs
images: /home/logs/images

Logs, config files, etc. are available at
    http://logs.test-lab.xenproject.org/osstest/logs

Explanation of these reports, and of osstest in general, is at
    http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master
    http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master

Test harness code can be found at
    http://xenbits.xen.org/gitweb?p=osstest.git;a=summary

broken-job build-arm64-xsm broken
broken-step build-arm64-xsm host-install(4)

Not pushing.

------------------------------------------------------------
commit a57a1b26ec0ae31f924cf2bbcf479637d007be44
Author: Wei Liu <wei.liu2@xxxxxxxxxx>
Date:   Mon Apr 1 11:32:38 2019 +0100

    tools/ocaml: make python scripts 2 and 3 compatible
    
    1. Explicitly import reduce because that's required in 3.
    2. Change print to function.
    3. Eliminate invocations of has_key.
    
    Signed-off-by: M A Young <m.a.young@xxxxxxxxxxxx>
    Signed-off-by: Wei Liu <wei.liu2@xxxxxxxxxx>
    Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Acked-by: Christian Lindig <christian.lindig@xxxxxxxxxx>

commit ff915c8cacc264ae1380d51fea07267b8308d7ba
Author: Wei Liu <wei.liu2@xxxxxxxxxx>
Date:   Mon Apr 1 11:32:37 2019 +0100

    pygrub: encode / decode string in Python 3
    
    String is unicode in 3 but bytes in 2. We need to call encode / decode
    function when using Python 3.
    
    Reported-by: M A Young <m.a.young@xxxxxxxxxxxx>
    Signed-off-by: Wei Liu <wei.liu2@xxxxxxxxxx>
    Acked-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>

commit 767ba397d34848c7e0c4e9cdfc5efa4e0cb61442
Author: Wei Liu <wei.liu2@xxxxxxxxxx>
Date:   Mon Apr 1 11:32:36 2019 +0100

    pygrub/grub: always use integer for default entry
    
    The original code set the default to either a string or an integer
    (0) and relies on a Python 2 specific behaviour to work (integer is
    allowed to be compared to string in Python 2 but not 3).
    
    Always use integer. The caller (pygrub) already has code to handle
    that.
    
    Reported-by: M A Young <m.a.young@xxxxxxxxxxxx>
    Signed-off-by: Wei Liu <wei.liu2@xxxxxxxxxx>
    Acked-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>

commit 485079e816788d70169f45579e1f5a8f909dc1b3
Author: Wei Liu <wei.liu2@xxxxxxxxxx>
Date:   Mon Apr 1 11:32:35 2019 +0100

    pygrub: fix message in grub parser
    
    The code suggests 0 is allowed. Zero is not a positive number.
    
    Signed-off-by: Wei Liu <wei.liu2@xxxxxxxxxx>
    Acked-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>

commit 905d7340f6d0abfbf986cede6e535c51ab1de3c3
Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
Date:   Mon Apr 1 10:08:43 2019 +0000

    xen/sched: Remove d->is_pinned
    
    The is_pinned field is rather odd.  It can only be activated with the
    "dom0_vcpus_pin" command line option, and causes dom0 (or the late hwdom) to
    have its vcpus identity pinned to pcpus.
    
    Having dom0_vcpus_pin active disallows the use of vcpu_set_hard_affinity().
    However, when a pcpu is offlined, or moved between cpupools, the affinity is
    broken and reverts to cpumask_all.  This results in vcpus which are no 
longer
    pinned, and cannot be adjusted.
    
    A related bit of functionality is the is_pinned_vcpu() predicate.  This is
    only used by x86 code, and permits the use of VCPUOP_get_physid and 
writeable
    access to some extra MSRs.
    
    The implementation however returns true for is_pinned (which will include
    unpinned vcpus from the above scenario), *or* if the hard affinity mask only
    has a single bit set (which is redundant with the intended effect of
    is_pinned, but also includes other domains).
    
    Rework the behaviour of "dom0_vcpus_pin" to only being an initial pinning
    configuration, and permit full adjustment.  This allows the user to
    reconfigure dom0 after the fact or fix up from the fallout of cpu hot unplug
    and cpupool manipulation.
    
    An unprivileged domain has no business using VCPUOP_get_physid, and 
shouldn't
    be able to just because it happens to be pinned by admin choice.  All uses 
of
    is_pinned_vcpu() should be restricted to the hardware domain, so rename it 
to
    is_hwdom_pinned_vcpu() to avoid future misuse.
    
    Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>
    Reviewed-by: Dario Faggioli <dfaggioli@xxxxxxxx>

commit d96a4d6c9cb57bdc46501880c908ae85197243da
Author: Wei Liu <wei.liu2@xxxxxxxxxx>
Date:   Mon Apr 1 11:39:00 2019 +0100

    tools/xenmon: make xenmon.py compatible with python 2 and 3
    
    Signed-off-by: Wei Liu <wei.liu2@xxxxxxxxxx>
    Acked-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>

commit c37db16ccb3426e2d22ec7731649770b56984b27
Author: Jan Beulich <jbeulich@xxxxxxxx>
Date:   Mon Apr 1 11:12:54 2019 +0200

    x86/APIC: suppress redundant "Switched to ..." messages
    
    There's no need to log anything when what we "switch to" is what is in
    use already.
    
    Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>
    Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>

commit f68f35fd2016e36ee30f8b3e7dfd46c554407ac1
Author: Jan Beulich <jbeulich@xxxxxxxx>
Date:   Mon Apr 1 11:12:16 2019 +0200

    x86emul/fuzz: adjust canonicalization in sanitize_input()
    
    Drop it entirely for %rbp - this register is not special purpose enough
    to warrant such special treatment. Add a comment to clarify the purpose
    of the canonicalization of %rip and %rsp.
    
    Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>
    Acked-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>

commit 7881bf488263f52b8f6dd9935031d7b405958c0c
Author: Jan Beulich <jbeulich@xxxxxxxx>
Date:   Mon Apr 1 11:09:43 2019 +0200

    x86/paging: paging_set_allocation() is init-only
    
    This is needed for Dom0 creation only, therefore it gets additionally
    framed by an #ifdef.
    
    Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>
    Reviewed-by: George Dunlap <george.dunlap@xxxxxxxxxx>

commit 12381e20b5c2cb2f54601bef47c4f6e43acf3833
Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
Date:   Fri Mar 29 13:32:09 2019 +0000

    xen/timers: Document and improve the representation of the timer heap 
metadata
    
    The {GET,SET}_HEAP_{SIZE,LIMIT}() macros implement some completely
    undocumented pointer misuse to store the size and limit information.  In
    practice, heap[0] is never a timer pointer, and used to stash the metadata
    instead.
    
    Extend the HEAP OPERATIONS comment to include this detail.  Introduce a
    structure representing the heap metadata, and a static inline function to
    perfom the type punning.
    
    Replace all of the above macros with an equivelent expression involving the
    heap_metadata() helper.  Note that I deliberately haven't rearranged the
    surrounding code - this allows the correctness of the transformation to be
    checked by confirming that the compiled binary is identical.
    
    This also removes two cases of a macro argument with side effects, which 
only
    worked correctly because the arguments were only evaluated once.
    
    Finally, fix up the type of dummy_heap.  The old code functioned correctly,
    but only by virtue of confusing a discrete object and a single-entry array.
    Change its type to match the intended semantics, and drop the redundant
    initialisation in timer_init().
    
    No functional change.
    
    Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>

commit 753ba43d6d16e688f688e01e1c77463ea2c6ec9f
Author: Juergen Gross <jgross@xxxxxxxx>
Date:   Thu Mar 28 16:46:22 2019 +0100

    xen/sched: fix credit2 smt idle handling
    
    Credit2's smt_idle_mask_set() and smt_idle_mask_clear() are used to
    identify idle cores where vcpus can be moved to. A core is thought to
    be idle when all siblings are known to have the idle vcpu running on
    them.
    
    Unfortunately the information of a vcpu running on a cpu is per
    runqueue. So in case not all siblings are in the same runqueue a core
    will never be regarded to be idle, as the sibling not in the runqueue
    is never known to run the idle vcpu.
    
    Use a credit2 specific cpumask of siblings with only those cpus
    being marked which are in the same runqueue as the cpu in question.
    
    Signed-off-by: Juergen Gross <jgross@xxxxxxxx>
    Reviewed-by: Dario Faggioli <dfaggioli@xxxxxxxx>

commit e88afede8cbc18032bcab49b3a25b472d5516cf5
Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
Date:   Tue Jul 10 13:53:21 2018 +0100

    libx86: Recalculate synthesised cpuid_policy fields when appropriate
    
    When filling a policy, either from CPUID or an incomming leaf stream,
    recalculate the synthesised vendor value.  All callers are expected to want
    this behaviour.
    
    Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>

commit 1c2c9f85dd36bd908441b37ab73172358509c9b5
Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
Date:   Wed Mar 20 14:56:15 2019 +0000

    tools/libxc: Use x86_cpuid_lookup_vendor() rather than opencoding the logic
    
    This doesn't address any of the assumptions that "anything which isn't AMD 
is
    Intel".  This logic is expected to be replaced wholesale with libx86 in the
    longterm.
    
    Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>

commit 00b4f4d0fb75dc183b499e78d1abcb865dbc30d7
Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
Date:   Tue Jul 10 13:53:21 2018 +0100

    x86/cpuid: Drop get_cpu_vendor() completely
    
    get_cpu_vendor() tries to do a number of things, and ends up doing none of
    them well.
    
    For calculating the vendor itself, use x86_cpuid_lookup_vendor() which is
    implemented in a far more efficient manner than looping over cpu_devs[].
    
    For setting up this_cpu, set it up once on the BSP only, rather than
    latest-takes-precident across the APs.  Such a system is probably not going 
to
    boot, but this feels like a less dangerous course of action.  Adjust the
    printed errors to be more clear in the mismatch case.
    
    This removes the only user of cpu_dev->c_ident[], so drop that field as 
well.
    
    Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>

commit e72309ffbe7c4e507649c74749f130cda691131c
Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
Date:   Wed Mar 20 14:05:11 2019 +0000

    libx86: Introduce x86_cpuid_lookup_vendor()
    
    Also introduce constants for the vendor strings in CPUID leaf 0.
    
    Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>

commit 8eed571409a7f81ec9327cfa95d7c298333e22e4
Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
Date:   Tue Mar 26 14:23:03 2019 +0000

    CI: Add a CentOS 6 container and build jobs
    
    CentOS 6 is probably the most frequently broken build, so adding it to CI
    would be a very good move.
    
    One problem is that CentOS 6 comes with Python 2.6, and Qemu requires 2.7.
    There appear to be no sensible ways to get Python 2.7 into a CentOS 6
    environments, so modify the build script to skip the Qemu upstream build
    instead.  Additionally, SeaBIOS requires GCC 4.6 or later, so skip it as 
well.
    
    Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Acked-by: Wei Liu <wei.liu2@xxxxxxxxxx>

commit 1316369dca610352cce3aaf76e90db1cce75ed9f
Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
Date:   Fri Mar 22 11:12:28 2019 +0000

    CI: Fix indentation in containerize script
    
    The script is mostly indented with spaces, but there are three tabs.  Fix 
them
    up to be consistent.
    
    No functional change.
    
    Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Acked-by: Wei Liu <wei.liu2@xxxxxxxxxx>
(qemu changes not included)

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.