|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH] xen/sched: Remove d->is_pinned
The is_pinned field is rather odd. It can only be activated with the
"dom0_vcpus_pin" command line option, and causes dom0 (or the late hwdom) to
have its vcpus identity pinned to pcpus.
Having dom0_vcpus_pin active disallows the use of vcpu_set_hard_affinity().
However, when a pcpu is hot unplugged, or moved between cpupools, the affinity
is broken and reverts to cpumask_all. This can result in vcpus which are no
longer pinned, and cannot be adjusted.
A related bit of functionality is the is_pinned_vcpu() predicate. This is
only used by x86 code, and permits the use of VCPUOP_get_physid and writeable
access to some extra MSRs.
The implementation however returns true for is_pinned (which will include
unpinned vcpus from the above scenario), *or* if the hard affinity mask only
has a single bit set (which is redundant with the intended effect of
is_pinned, but also includes other domains).
Rework the behaviour of "dom0_vcpus_pin" to only being an initial pinning
configuration, and permit full adjustment. This allows the user to
reconfigure dom0 after the fact or fix up from the fallout of cpu hot unplug
and cpupool manipulation.
An unprivileged domain has no buisness using VCPUOP_get_physid, and shouldn't
be able to just because it happens to be pinned by admin choice. All uses of
is_pinned_vcpu() should be restricted to the hardware domain, so rename it to
is_hwdom_pinned_vcpu() to avoid future misuse.
Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
---
CC: Jan Beulich <JBeulich@xxxxxxxx>
CC: Wei Liu <wei.liu2@xxxxxxxxxx>
CC: Roger Pau Monné <roger.pau@xxxxxxxxxx>
CC: Stefano Stabellini <sstabellini@xxxxxxxxxx>
CC: Julien Grall <julien.grall@xxxxxxx>
CC: George Dunlap <george.dunlap@xxxxxxxxxxxxx>
CC: Dario Faggioli <dfaggioli@xxxxxxxx>
CC: Juergen Gross <jgross@xxxxxxxx>
Other oddities which I've noticed and should probably be fixed in due course.
1) Permitting real writes to MSR_IA32_UCODE_REV is pointless. The only
legitimate value to occur here is 0, and that is already properly accounted
for in the read handler.
2) dom0_setup_vcpu() results in 2 or 3 calls sched_set_affinity(), which is 1
or 2 too many.
3) cpumask_weight() is a surprisingly expensive function, and we use it all
over the place. It will almost certainly benefit from the use of popcnt.
---
xen/arch/x86/dom0_build.c | 2 +-
xen/arch/x86/domain.c | 2 +-
xen/arch/x86/pv/emul-priv-op.c | 9 ++++-----
xen/common/domain.c | 1 -
xen/common/schedule.c | 5 +----
xen/include/xen/sched.h | 10 ++++++----
6 files changed, 13 insertions(+), 16 deletions(-)
diff --git a/xen/arch/x86/dom0_build.c b/xen/arch/x86/dom0_build.c
index 6ebe367..73f5407 100644
--- a/xen/arch/x86/dom0_build.c
+++ b/xen/arch/x86/dom0_build.c
@@ -213,7 +213,7 @@ struct vcpu *__init dom0_setup_vcpu(struct domain *d,
}
else
{
- if ( !d->is_pinned && !dom0_affinity_relaxed )
+ if ( !opt_dom0_vcpus_pin && !dom0_affinity_relaxed )
sched_set_affinity(v, &dom0_cpus, NULL);
sched_set_affinity(v, NULL, &dom0_cpus);
}
diff --git a/xen/arch/x86/domain.c b/xen/arch/x86/domain.c
index 8d579e2..20b86fd 100644
--- a/xen/arch/x86/domain.c
+++ b/xen/arch/x86/domain.c
@@ -1229,7 +1229,7 @@ arch_do_vcpu_op(
struct vcpu_get_physid cpu_id;
rc = -EINVAL;
- if ( !is_pinned_vcpu(v) )
+ if ( !is_hwdom_pinned_vcpu(v) )
break;
cpu_id.phys_id =
diff --git a/xen/arch/x86/pv/emul-priv-op.c b/xen/arch/x86/pv/emul-priv-op.c
index 3746e2a..84ce67c 100644
--- a/xen/arch/x86/pv/emul-priv-op.c
+++ b/xen/arch/x86/pv/emul-priv-op.c
@@ -1017,7 +1017,7 @@ static int write_msr(unsigned int reg, uint64_t val,
if ( boot_cpu_data.x86_vendor != X86_VENDOR_AMD ||
boot_cpu_data.x86 < 0x10 || boot_cpu_data.x86 > 0x17 )
break;
- if ( !is_hardware_domain(currd) || !is_pinned_vcpu(curr) )
+ if ( !is_hwdom_pinned_vcpu(curr) )
return X86EMUL_OKAY;
if ( (rdmsr_safe(MSR_AMD64_NB_CFG, temp) != 0) ||
((val ^ temp) & ~(1ULL << AMD64_NB_CFG_CF8_EXT_ENABLE_BIT)) )
@@ -1030,7 +1030,7 @@ static int write_msr(unsigned int reg, uint64_t val,
if ( boot_cpu_data.x86_vendor != X86_VENDOR_AMD ||
boot_cpu_data.x86 < 0x10 || boot_cpu_data.x86 > 0x17 )
break;
- if ( !is_hardware_domain(currd) || !is_pinned_vcpu(curr) )
+ if ( !is_hwdom_pinned_vcpu(curr) )
return X86EMUL_OKAY;
if ( rdmsr_safe(MSR_FAM10H_MMIO_CONF_BASE, temp) != 0 )
break;
@@ -1050,7 +1050,7 @@ static int write_msr(unsigned int reg, uint64_t val,
case MSR_IA32_UCODE_REV:
if ( boot_cpu_data.x86_vendor != X86_VENDOR_INTEL )
break;
- if ( !is_hardware_domain(currd) || !is_pinned_vcpu(curr) )
+ if ( !is_hwdom_pinned_vcpu(curr) )
return X86EMUL_OKAY;
if ( rdmsr_safe(reg, temp) )
break;
@@ -1086,8 +1086,7 @@ static int write_msr(unsigned int reg, uint64_t val,
case MSR_IA32_ENERGY_PERF_BIAS:
if ( boot_cpu_data.x86_vendor != X86_VENDOR_INTEL )
break;
- if ( !is_hardware_domain(currd) || !is_pinned_vcpu(curr) ||
- wrmsr_safe(reg, val) == 0 )
+ if ( !is_hwdom_pinned_vcpu(curr) || wrmsr_safe(reg, val) == 0 )
return X86EMUL_OKAY;
break;
diff --git a/xen/common/domain.c b/xen/common/domain.c
index 3b18f11..a1f8bb4 100644
--- a/xen/common/domain.c
+++ b/xen/common/domain.c
@@ -342,7 +342,6 @@ struct domain *domain_create(domid_t domid,
if ( hardware_domid < 0 || hardware_domid >= DOMID_FIRST_RESERVED )
panic("The value of hardware_dom must be a valid domain ID\n");
- d->is_pinned = opt_dom0_vcpus_pin;
d->disable_migrate = 1;
old_hwdom = hardware_domain;
hardware_domain = d;
diff --git a/xen/common/schedule.c b/xen/common/schedule.c
index 60755a6..76d6078 100644
--- a/xen/common/schedule.c
+++ b/xen/common/schedule.c
@@ -276,7 +276,7 @@ int sched_init_vcpu(struct vcpu *v, unsigned int processor)
* Initialize affinity settings. The idler, and potentially
* domain-0 VCPUs, are pinned onto their respective physical CPUs.
*/
- if ( is_idle_domain(d) || d->is_pinned )
+ if ( is_idle_domain(d) || (is_hardware_domain(d) && opt_dom0_vcpus_pin) )
sched_set_affinity(v, cpumask_of(processor), &cpumask_all);
else
sched_set_affinity(v, &cpumask_all, &cpumask_all);
@@ -958,9 +958,6 @@ int vcpu_set_hard_affinity(struct vcpu *v, const cpumask_t
*affinity)
cpumask_t online_affinity;
cpumask_t *online;
- if ( v->domain->is_pinned )
- return -EINVAL;
-
online = VCPU2ONLINE(v);
cpumask_and(&online_affinity, affinity, online);
if ( cpumask_empty(&online_affinity) )
diff --git a/xen/include/xen/sched.h b/xen/include/xen/sched.h
index edee52d..6d23b6d 100644
--- a/xen/include/xen/sched.h
+++ b/xen/include/xen/sched.h
@@ -381,8 +381,6 @@ struct domain
bool is_console;
/* Is this a xenstore domain (not dom0)? */
bool is_xenstore;
- /* Domain's VCPUs are pinned 1:1 to physical CPUs? */
- bool is_pinned;
/* Non-migratable and non-restoreable? */
bool disable_migrate;
/* Is this guest being debugged by dom0? */
@@ -961,8 +959,12 @@ static inline bool is_hvm_vcpu(const struct vcpu *v)
return is_hvm_domain(v->domain);
}
-#define is_pinned_vcpu(v) ((v)->domain->is_pinned || \
- cpumask_weight((v)->cpu_hard_affinity) == 1)
+static inline bool is_hwdom_pinned_vcpu(const struct vcpu *v)
+{
+ return (is_hardware_domain(v->domain) &&
+ cpumask_weight(v->cpu_hard_affinity) == 1);
+}
+
#ifdef CONFIG_HAS_PASSTHROUGH
#define has_iommu_pt(d) (dom_iommu(d)->status != IOMMU_STATUS_disabled)
#define need_iommu_pt_sync(d) (dom_iommu(d)->need_sync)
--
2.1.4
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |