[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v5 3/7] xen/arm: zynqmp: introduce zynqmp specific defines



From: "Edgar E. Iglesias" <edgar.iglesias@xxxxxxxxxx>

From: Edgar E. Iglesias <edgar.iglesias@xxxxxxxxxx>

Introduce zynqmp specific defines for the firmware calls.
See EEMI:
https://www.xilinx.com/support/documentation/user_guides/ug1200-eemi-api.pdf

The error codes are described, under XIlPM Error Codes:
https://www.xilinx.com/support/documentation/user_guides/ug1137-zynq-ultrascale-mpsoc-swdev.pdf

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xxxxxxxxxx>
Signed-off-by: Stefano Stabellini <stefanos@xxxxxxxxxx>

---

Although the amount of #defines has been significantly reduced in v5,
there is still a significant amount of static definitions:

- MM_*
These are the MMIO addresses of each resource to do permission checks.
Technically, they are also present on device tree, but using device tree
to get the mmio regions is not simple and not done in this series.
Xilinx plan to send a patch series in the future to extend the EEMI
functionalities and as part of that work, more device tree based
permission checking will be done, solving this problem. These
definitions could also be removed if we used a trivial "if dom0 -> yes,
otherwise no" permission checking.

- pm_api_id
These are the EEMI function IDs. Unavoidable.

- pm_ret_status
These are the EEMI return statuses. Unavoidable.

- pm_node_id
These are the EEMI function parameters for power management operations.
Today, it is not possible to get them from device tree as there is no
such information there. Even in the future when we add more power
domains info to device tree, the EEMI function parameters might remain
unique and different, requiring a table like this one.

- pm_reset
These are the EEMI function parameters for reset operations. Same as
pm_node_id.

---
Changes in v5:
- remove MMIO access related definitions

Changes in v4:
- define PM_MMIO_SHIFT
---
 xen/include/asm-arm/platforms/xilinx-zynqmp-eemi.h | 293 +++++++++++++++++++++
 1 file changed, 293 insertions(+)

diff --git a/xen/include/asm-arm/platforms/xilinx-zynqmp-eemi.h 
b/xen/include/asm-arm/platforms/xilinx-zynqmp-eemi.h
index 43cefb5..f6ad03b 100644
--- a/xen/include/asm-arm/platforms/xilinx-zynqmp-eemi.h
+++ b/xen/include/asm-arm/platforms/xilinx-zynqmp-eemi.h
@@ -16,6 +16,299 @@
 
 #include <asm/processor.h>
 
+#define MM_RPU 0xff9a0
+#define MM_RTC 0xffa60
+#define MM_ADMA_CH0    0xffa80
+
+#define MM_USB3_0_XHCI  0xfe200
+#define MM_USB3_1_XHCI  0xfe300
+
+#define MM_SATA_AHCI_HBA       0xfd0c0
+#define MM_AXIPCIE_MAIN        0xfd0e0
+#define MM_CRF_APB     0xfd1a0000
+#define MM_PCIE_ATTRIB 0xfd480
+#define MM_DP  0xfd4a0
+#define MM_GPU 0xfd4b0
+#define MM_GDMA_CH0    0xfd500
+
+#define MM_UART0       0xff000
+#define MM_UART1       0xff010
+#define MM_I2C0        0xff020
+#define MM_I2C1        0xff030
+#define MM_SPI0        0xff040
+#define MM_SPI1        0xff050
+#define MM_CAN0        0xff060
+#define MM_CAN1        0xff070
+#define MM_GPIO        0xff0a0
+#define MM_GEM0        0xff0b0
+#define MM_GEM1        0xff0c0
+#define MM_GEM2        0xff0d0
+#define MM_GEM3        0xff0e0
+#define MM_QSPI        0xff0f0
+#define MM_NAND        0xff100
+#define MM_TTC0        0xff110
+#define MM_TTC1        0xff120
+#define MM_TTC2        0xff130
+#define MM_TTC3        0xff140
+#define MM_SWDT        0xff150
+#define MM_SD0 0xff160
+#define MM_SD1 0xff170
+
+/* Service calls.  */
+#define PM_GET_TRUSTZONE_VERSION       0xa03
+
+/* SMC function IDs for SiP Service queries */
+#define ZYNQMP_SIP_SVC_CALL_COUNT       0xff00
+#define ZYNQMP_SIP_SVC_UID              0xff01
+#define ZYNQMP_SIP_SVC_VERSION          0xff03
+
+#define PM_MMIO_SHIFT                   32
+
+enum pm_api_id {
+       /* Miscellaneous API functions: */
+       PM_GET_API_VERSION = 1, /* Do not change or move */
+       PM_SET_CONFIGURATION,
+       PM_GET_NODE_STATUS,
+       PM_GET_OP_CHARACTERISTIC,
+       PM_REGISTER_NOTIFIER,
+       /* API for suspending of PUs: */
+       PM_REQ_SUSPEND,
+       PM_SELF_SUSPEND,
+       PM_FORCE_POWERDOWN,
+       PM_ABORT_SUSPEND,
+       PM_REQ_WAKEUP,
+       PM_SET_WAKEUP_SOURCE,
+       PM_SYSTEM_SHUTDOWN,
+       /* API for managing PM slaves: */
+       PM_REQ_NODE,
+       PM_RELEASE_NODE,
+       PM_SET_REQUIREMENT,
+       PM_SET_MAX_LATENCY,
+       /* Direct control API functions: */
+       PM_RESET_ASSERT,
+       PM_RESET_GET_STATUS,
+       PM_MMIO_WRITE,
+       PM_MMIO_READ,
+       PM_INIT,
+       PM_FPGA_LOAD,
+       PM_FPGA_GET_STATUS,
+       PM_GET_CHIPID,
+       /* ID 25 is been used by U-boot to process secure boot images */
+       /* Secure library generic API functions */
+       PM_SECURE_SHA = 26,
+       PM_SECURE_RSA,
+       /* Pin control API functions */
+       PM_PINCTRL_REQUEST,
+       PM_PINCTRL_RELEASE,
+       PM_PINCTRL_GET_FUNCTION,
+       PM_PINCTRL_SET_FUNCTION,
+       PM_PINCTRL_CONFIG_PARAM_GET,
+       PM_PINCTRL_CONFIG_PARAM_SET,
+       /* PM IOCTL API */
+       PM_IOCTL,
+       /* API to query information from firmware */
+       PM_QUERY_DATA,
+       /* Clock control API functions */
+       PM_CLOCK_ENABLE,
+       PM_CLOCK_DISABLE,
+       PM_CLOCK_GETSTATE,
+       PM_CLOCK_SETDIVIDER,
+       PM_CLOCK_GETDIVIDER,
+       PM_CLOCK_SETRATE,
+       PM_CLOCK_GETRATE,
+       PM_CLOCK_SETPARENT,
+       PM_CLOCK_GETPARENT,
+       PM_API_MAX
+};
+
+enum pm_node_id {
+       NODE_RPU = 6,
+       NODE_RPU_0,
+       NODE_RPU_1,
+       NODE_GPU_PP_0 = 20,
+       NODE_GPU_PP_1,
+       NODE_USB_0,
+       NODE_USB_1,
+       NODE_TTC_0,
+       NODE_TTC_1,
+       NODE_TTC_2,
+       NODE_TTC_3,
+       NODE_SATA,
+       NODE_ETH_0,
+       NODE_ETH_1,
+       NODE_ETH_2,
+       NODE_ETH_3,
+       NODE_UART_0,
+       NODE_UART_1,
+       NODE_SPI_0,
+       NODE_SPI_1,
+       NODE_I2C_0,
+       NODE_I2C_1,
+       NODE_SD_0,
+       NODE_SD_1,
+       NODE_DP,
+       NODE_GDMA,
+       NODE_ADMA,
+       NODE_NAND,
+       NODE_QSPI,
+       NODE_GPIO,
+       NODE_CAN_0,
+       NODE_CAN_1,
+       NODE_AFI,
+       NODE_APLL,
+       NODE_VPLL,
+       NODE_DPLL,
+       NODE_RPLL,
+       NODE_IOPLL,
+       NODE_DDR,
+       NODE_IPI_APU,
+       NODE_IPI_RPU_0,
+       NODE_GPU,
+       NODE_PCIE,
+       NODE_PCAP,
+       NODE_RTC,
+};
+
+/**
+ * @XST_PM_SUCCESS:            Success
+ * @XST_PM_INTERNAL:   Unexpected error
+ * @XST_PM_CONFLICT:   Conflicting requirements
+ * @XST_PM_NO_ACCESS:  Access rights violation
+ * @XST_PM_INVALID_NODE:       Does not apply to node passed as argument
+ * @XST_PM_DOUBLE_REQ: Duplicate request
+ * @XST_PM_ABORT_SUSPEND:      Target has aborted suspend
+ */
+enum pm_ret_status {
+       XST_PM_SUCCESS = 0,
+       XST_PM_INTERNAL = 2000,
+       XST_PM_CONFLICT,
+       XST_PM_NO_ACCESS,
+       XST_PM_INVALID_NODE,
+       XST_PM_DOUBLE_REQ,
+       XST_PM_ABORT_SUSPEND,
+};
+
+enum pm_reset {
+       XILPM_RESET_START = 999,
+       XILPM_RESET_PCIE_CFG,
+       XILPM_RESET_PCIE_BRIDGE,
+       XILPM_RESET_PCIE_CTRL,
+       XILPM_RESET_DP,
+       XILPM_RESET_SWDT_CRF,
+       XILPM_RESET_AFI_FM5,
+       XILPM_RESET_AFI_FM4,
+       XILPM_RESET_AFI_FM3,
+       XILPM_RESET_AFI_FM2,
+       XILPM_RESET_AFI_FM1,
+       XILPM_RESET_AFI_FM0,
+       XILPM_RESET_GDMA,
+       XILPM_RESET_GPU_PP1,
+       XILPM_RESET_GPU_PP0,
+       XILPM_RESET_GPU,
+       XILPM_RESET_GT,
+       XILPM_RESET_SATA,
+       XILPM_RESET_ACPU3_PWRON,
+       XILPM_RESET_ACPU2_PWRON,
+       XILPM_RESET_ACPU1_PWRON,
+       XILPM_RESET_ACPU0_PWRON,
+       XILPM_RESET_APU_L2,
+       XILPM_RESET_ACPU3,
+       XILPM_RESET_ACPU2,
+       XILPM_RESET_ACPU1,
+       XILPM_RESET_ACPU0,
+       XILPM_RESET_DDR,
+       XILPM_RESET_APM_FPD,
+       XILPM_RESET_SOFT,
+       XILPM_RESET_GEM0,
+       XILPM_RESET_GEM1,
+       XILPM_RESET_GEM2,
+       XILPM_RESET_GEM3,
+       XILPM_RESET_QSPI,
+       XILPM_RESET_UART0,
+       XILPM_RESET_UART1,
+       XILPM_RESET_SPI0,
+       XILPM_RESET_SPI1,
+       XILPM_RESET_SDIO0,
+       XILPM_RESET_SDIO1,
+       XILPM_RESET_CAN0,
+       XILPM_RESET_CAN1,
+       XILPM_RESET_I2C0,
+       XILPM_RESET_I2C1,
+       XILPM_RESET_TTC0,
+       XILPM_RESET_TTC1,
+       XILPM_RESET_TTC2,
+       XILPM_RESET_TTC3,
+       XILPM_RESET_SWDT_CRL,
+       XILPM_RESET_NAND,
+       XILPM_RESET_ADMA,
+       XILPM_RESET_GPIO,
+       XILPM_RESET_IOU_CC,
+       XILPM_RESET_TIMESTAMP,
+       XILPM_RESET_RPU_R50,
+       XILPM_RESET_RPU_R51,
+       XILPM_RESET_RPU_AMBA,
+       XILPM_RESET_OCM,
+       XILPM_RESET_RPU_PGE,
+       XILPM_RESET_USB0_CORERESET,
+       XILPM_RESET_USB1_CORERESET,
+       XILPM_RESET_USB0_HIBERRESET,
+       XILPM_RESET_USB1_HIBERRESET,
+       XILPM_RESET_USB0_APB,
+       XILPM_RESET_USB1_APB,
+       XILPM_RESET_IPI,
+       XILPM_RESET_APM_LPD,
+       XILPM_RESET_RTC,
+       XILPM_RESET_SYSMON,
+       XILPM_RESET_AFI_FM6,
+       XILPM_RESET_LPD_SWDT,
+       XILPM_RESET_FPD,
+       XILPM_RESET_RPU_DBG1,
+       XILPM_RESET_RPU_DBG0,
+       XILPM_RESET_DBG_LPD,
+       XILPM_RESET_DBG_FPD,
+       XILPM_RESET_APLL,
+       XILPM_RESET_DPLL,
+       XILPM_RESET_VPLL,
+       XILPM_RESET_IOPLL,
+       XILPM_RESET_RPLL,
+       XILPM_RESET_GPO3_PL_0,
+       XILPM_RESET_GPO3_PL_1,
+       XILPM_RESET_GPO3_PL_2,
+       XILPM_RESET_GPO3_PL_3,
+       XILPM_RESET_GPO3_PL_4,
+       XILPM_RESET_GPO3_PL_5,
+       XILPM_RESET_GPO3_PL_6,
+       XILPM_RESET_GPO3_PL_7,
+       XILPM_RESET_GPO3_PL_8,
+       XILPM_RESET_GPO3_PL_9,
+       XILPM_RESET_GPO3_PL_10,
+       XILPM_RESET_GPO3_PL_11,
+       XILPM_RESET_GPO3_PL_12,
+       XILPM_RESET_GPO3_PL_13,
+       XILPM_RESET_GPO3_PL_14,
+       XILPM_RESET_GPO3_PL_15,
+       XILPM_RESET_GPO3_PL_16,
+       XILPM_RESET_GPO3_PL_17,
+       XILPM_RESET_GPO3_PL_18,
+       XILPM_RESET_GPO3_PL_19,
+       XILPM_RESET_GPO3_PL_20,
+       XILPM_RESET_GPO3_PL_21,
+       XILPM_RESET_GPO3_PL_22,
+       XILPM_RESET_GPO3_PL_23,
+       XILPM_RESET_GPO3_PL_24,
+       XILPM_RESET_GPO3_PL_25,
+       XILPM_RESET_GPO3_PL_26,
+       XILPM_RESET_GPO3_PL_27,
+       XILPM_RESET_GPO3_PL_28,
+       XILPM_RESET_GPO3_PL_29,
+       XILPM_RESET_GPO3_PL_30,
+       XILPM_RESET_GPO3_PL_31,
+       XILPM_RESET_RPU_LS,
+       XILPM_RESET_PS_ONLY,
+       XILPM_RESET_PL,
+       XILPM_RESET_END
+};
+
 extern bool zynqmp_eemi(struct cpu_user_regs *regs);
 
 #endif /* __ASM_ARM_PLATFORMS_ZYNQMP_H */
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.