[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [Qemu-devel] [PATCH] Xen PCI passthrough: fix passthrough failure when irq map failure



On Thu, Nov 22, 2018 at 03:18:05PM +0100, Roger Pau Monné wrote:
> On Thu, Nov 22, 2018 at 08:11:20AM -0500, Zhao Yan wrote:
> > On Thu, Oct 18, 2018 at 03:56:36PM +0100, Roger Pau Monné wrote:
> > > On Thu, Oct 18, 2018 at 08:22:41AM +0000, Zhao, Yan Y wrote:
> > > > Hi
> > > > The background for this patch is that: for some pci device, even it's 
> > > > PCI_INTERRUPT_PIN is not 0, it actually does not support INTx mode, so 
> > > > we should just report error, disable INTx mode and continue the 
> > > > passthrough.
> > > > However, the commit 5a11d0f7 regards this as error condition and let 
> > > > qemu quit passthrough, which is too rigorous.
> > > > 
> > > > Error message is below:
> > > > libxl: error: libxl_qmp.c:287:qmp_handle_error_response: Domain 
> > > > 2:received an error message from QMP server: Mapping machine irq 0 to 
> > > > pirq -1 failed: Operation not permitted
> > > 
> > > I'm having issues figuring out what's happening here.
> > > s->real_device.irq is 0, yet the PCI config space read of
> > > PCI_INTERRUPT_PIN returns something different than 0.
> > > 
> > > AFAICT this is due to some kind of error in Linux, so that even when
> > > the device is supposed to have a valid IRQ the sysfs node it is set to
> > > 0, do you know the actual underlying cause of this?
> > > 
> > > Thanks, Roger.
> > Hi Roger
> > Sorry for the later reply, I just missed this mail...
> > On my side, it's because the hardware actually does not support INTx mode,
> > but its configuration space does not report PCI_INTERRUPT_PIN to 0. It's a
> > hardware bug, but previous version of qemu can tolerate it, switch to MSI
> > and make passthrough work.
> 
> Then I think it would be better to check both PCI_INTERRUPT_PIN and
> s->real_device.irq before attempting to map the IRQ.
> 
> Making the error non-fatal would mean that a device with a valid IRQ
> could fail to be setup correctly but the guest will still be created,
> and things won't go as expected when the guest attempts to use it.
> 
> Thanks, Roger.
hi roger
thanks for your sugguestion. it's right that "s->real_device.irq" is needed to 
be checked before mapping, like if it's 0.
but on the other hand, maybe xc_physdev_map_pirq() itself can serve as a 
checking of "s->real_device.irq" ?
like in our case, it will fail and return -EPERM.
then error hanling is still conducted ==>set INTX_DISABLE flag, eventhrough the 
error is not fatal.

    machine_irq = s->real_device.irq;
    rc = xc_physdev_map_pirq(xen_xc, xen_domid, machine_irq, &pirq);
    if (rc < 0) {
        error_setg_errno(errp, errno, "Mapping machine irq %u to"
                         " pirq %i failed", machine_irq, pirq);

        /* Disable PCI intx assertion (turn on bit10 of devctl) */
        cmd |= PCI_COMMAND_INTX_DISABLE;
        machine_irq = 0;
        s->machine_irq = 0;
So, do you think it's all right just converting fatal error to non-fatal?


Thanks
Yan


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.