[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v7 0/7] KVM: x86: Allow Qemu/KVM to use PVH entry point


  • To: Maran Wilson <maran.wilson@xxxxxxxxxx>, x86@xxxxxxxxxx, xen-devel@xxxxxxxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx, kvm@xxxxxxxxxxxxxxx, jgross@xxxxxxxx
  • From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
  • Date: Mon, 19 Nov 2018 19:25:43 +0100
  • Autocrypt: addr=pbonzini@xxxxxxxxxx; keydata= xsEhBFRCcBIBDqDGsz4K0zZun3jh+U6Z9wNGLKQ0kSFyjN38gMqU1SfP+TUNQepFHb/Gc0E2 CxXPkIBTvYY+ZPkoTh5xF9oS1jqI8iRLzouzF8yXs3QjQIZ2SfuCxSVwlV65jotcjD2FTN04 hVopm9llFijNZpVIOGUTqzM4U55sdsCcZUluWM6x4HSOdw5F5Utxfp1wOjD/v92Lrax0hjiX DResHSt48q+8FrZzY+AUbkUS+Jm34qjswdrgsC5uxeVcLkBgWLmov2kMaMROT0YmFY6A3m1S P/kXmHDXxhe23gKb3dgwxUTpENDBGcfEzrzilWueOeUWiOcWuFOed/C3SyijBx3Av/lbCsHU Vx6pMycNTdzU1BuAroB+Y3mNEuW56Yd44jlInzG2UOwt9XjjdKkJZ1g0P9dwptwLEgTEd3Fo UdhAQyRXGYO8oROiuh+RZ1lXp6AQ4ZjoyH8WLfTLf5g1EKCTc4C1sy1vQSdzIRu3rBIjAvnC tGZADei1IExLqB3uzXKzZ1BZ+Z8hnt2og9hb7H0y8diYfEk2w3R7wEr+Ehk5NQsT2MPI2QBd wEv1/Aj1DgUHZAHzG1QN9S8wNWQ6K9DqHZTBnI1hUlkp22zCSHK/6FwUCuYp1zcAEQEAAc0f UGFvbG8gQm9uemluaSA8Ym9uemluaUBnbnUub3JnPsLBTQQTAQIAIwUCVEJ7AwIbAwcLCQgH AwIBBhUIAgkKCwQWAgMBAh4BAheAAAoJEH4VEAzNNmmxNcwOniaZVLsuy1lW/ntYCA0Caz0i sHpmecK8aWlvL9wpQCk4GlOX9L1emyYXZPmzIYB0IRqmSzAlZxi+A2qm9XOxs5gJ2xqMEXX5 FMtUH3kpkWWJeLqe7z0EoQdUI4EG988uv/tdZyqjUn2XJE+K01x7r3MkUSFz/HZKZiCvYuze VlS0NTYdUt5jBXualvAwNKfxEkrxeHjxgdFHjYWhjflahY7TNRmuqPM/Lx7wAuyoDjlYNE40 Z+Kun4/KjMbjgpcF4Nf3PJQR8qXI6p3so2qsSn91tY7DFSJO6v2HwFJkC2jU95wxfNmTEUZc znXahYbVOwCDJRuPrE5GKFd/XJU9u5hNtr/uYipHij01WXal2cce1S5mn1/HuM1yo1u8xdHy IupCd57EWI948e8BlhpujUCU2tzOb2iYS0kpmJ9/oLVZrOcSZCcCl2P0AaCAsj59z2kwQS9D du0WxUs8waso0Qq6tDEHo8yLCOJDzSz4oojTtWe4zsulVnWV+wu70AioemAT8S6JOtlu60C5 dHgQUD1Tp+ReXpDKXmjbASJx4otvW0qah3o6JaqO79tbDqIvncu3tewwp6c85uZd48JnIOh3 utBAu684nJakbbvZUGikJfxd887ATQRUQnHuAQgAx4dxXO6/Zun0eVYOnr5GRl76+2UrAAem Vv9Yfn2PbDIbxXqLff7oyVJIkw4WdhQIIvvtu5zH24iYjmdfbg8iWpP7NqxUQRUZJEWbx2CR wkMHtOmzQiQ2tSLjKh/cHeyFH68xjeLcinR7jXMrHQK+UCEw6jqi1oeZzGvfmxarUmS0uRuf fAb589AJW50kkQK9VD/9QC2FJISSUDnRC0PawGSZDXhmvITJMdD4TjYrePYhSY4uuIV02v02 8TVAaYbIhxvDY0hUQE4r8ZbGRLn52bEzaIPgl1p/adKfeOUeMReg/CkyzQpmyB1TSk8lDMxQ zCYHXAzwnGi8WU9iuE1P0wARAQABwsEzBBgBAgAJBQJUQnHuAhsMAAoJEH4VEAzNNmmxp1EO oJy0uZggJm7gZKeJ7iUpeX4eqUtqelUw6gU2daz2hE/jsxsTbC/w5piHmk1H1VWDKEM4bQBT uiJ0bfo55SWsUNN+c9hhIX+Y8LEe22izK3w7mRpvGcg+/ZRG4DEMHLP6JVsv5GMpoYwYOmHn plOzCXHvmdlW0i6SrMsBDl9rw4AtIa6bRwWLim1lQ6EM3PWifPrWSUPrPcw4OLSwFk0CPqC4 HYv/7ZnASVkR5EERFF3+6iaaVi5OgBd81F1TCvCX2BEyIDRZLJNvX3TOd5FEN+lIrl26xecz 876SvcOb5SL5SKg9/rCBufdPSjojkGFWGziHiFaYhbuI2E+NfWLJtd+ZvWAAV+O0d8vFFSvr iy9enJ8kxJwhC0ECbSKFY+W1eTIhMD3aeAKY90drozWEyHhENf4l/V+Ja5vOnW+gCDQkGt2Y 1lJAPPSIqZKvHzGShdh8DduC0U3xYkfbGAUvbxeepjgzp0uEnBXfPTy09JGpgWbg0w91GyfT /ujKaGd4vxG2Ei+MMNDmS1SMx7wu0evvQ5kT9NPzyq8R2GIhVSiAd2jioGuTjX6AZCFv3ToO 53DliFMkVTecLptsXaesuUHgL9dKIfvpm+rNXRn9wAwGjk0X/A==
  • Cc: luto@xxxxxxxxxx, rkrcmar@xxxxxxxxxx, linus.walleij@xxxxxxxxxx, dave.hansen@xxxxxxxxxxxxxxx, hpa@xxxxxxxxx, boris.ostrovsky@xxxxxxxxxx, hch@xxxxxxxxxxxxx, mingo@xxxxxxxxxx, bp@xxxxxxx, Stefano Garzarella <sgarzare@xxxxxxxxxx>, thomas.lendacky@xxxxxxx, Stefan Hajnoczi <stefanha@xxxxxxxxxx>, jpoimboe@xxxxxxxxxx, tglx@xxxxxxxxxxxxx, mchehab@xxxxxxxxxx, gregkh@xxxxxxxxxxxxxxxxxxx, rdunlap@xxxxxxxxxxxxx, George Kennedy <george.kennedy@xxxxxxxxxx>, Liam Merwick <liam.merwick@xxxxxxxxxx>, davem@xxxxxxxxxxxxx, kirill.shutemov@xxxxxxxxxxxxxxx, roger.pau@xxxxxxxxxx
  • Delivery-date: Mon, 19 Nov 2018 18:25:56 +0000
  • List-id: Xen developer discussion <xen-devel.lists.xenproject.org>
  • Openpgp: preference=signencrypt

On 16/11/18 18:17, Maran Wilson wrote:
> On 11/16/2018 2:46 AM, Paolo Bonzini wrote:
>> On 17/04/18 01:09, Maran Wilson wrote:
>>> For certain applications it is desirable to rapidly boot a KVM virtual
>>> machine. In cases where legacy hardware and software support within the
>>> guest is not needed, Qemu should be able to boot directly into the
>>> uncompressed Linux kernel binary without the need to run firmware.
>>>
>>> There already exists an ABI to allow this for Xen PVH guests and the ABI
>>> is supported by Linux and FreeBSD:
>>>
>>>     https://xenbits.xen.org/docs/unstable/misc/pvh.html
>>>
>>> This patch series would enable Qemu to use that same entry point for
>>> booting KVM guests.
>> Hi Maran, what happened to this series (and to the QEMU work)?
> 
> Hi Paolo,
> 
> Thank you for the reminder. Sorry, I have been wanting to continue this
> work for a while now, but our team has been pulled in other directions
> and this one ended up getting temporarily pushed down the priority stack.
> 
> Let me discuss with my management and get back to you. I do want (and
> intend) to support and push this over the finish line.
> 
> In the meantime, if there are any folks out there with a specific
> business need for getting this done sooner rather than later

Well, we are interested in using this to avoid the decompression cost of
booting a "container-like" VM image.  I'm not sure what we will do about
that, but certainly getting this included in the upstream projects would
be a prerequisite.

If you really prefer to discuss things offlist, feel free to include me,
Stefan and Stefano.

Paolo

> and are
> able to invest a bit of time to collaborate on the remaining Qemu work,
> please feel free to ping me offline. We have some preliminary Qemu
> patches, but there is some additional work needed before they are ready
> wider review.
> 
> Thanks,
> -Maran

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.