[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Porting XEN hypervisor on iMX8QM



Hi Ravi,

Please have a look at our wiki as a reference:
http://wiki.xenproject.org/wiki/Xen_ARM_with_Virtualization_Extensions

I would start from cross-compiling the Xen hypervisor (the xen/
directory), no need to build the Xen userspace tools initially.
Make sure to have the right early boot uart driver, see
CONFIG_EARLY_PRINTK and docs/misc/arm/early-printk.txt.

After you boot the Xen binary from uboot, you should be able to see some
console output from the hypervisror. The step after that is booting
Dom0.

Cheers,

Stefano

On Mon, 5 Nov 2018, Ravi Pichholiya wrote:
> Hi Stefano,
> This is in reference to our LinkedIn discussion, in our one of the project we 
> need to port XEN hypervisor on iMx8QM.
> 
> Request you to share what all visibility we should require from boot 
> prospective as currently we are having access to Device tree
> and U-boot source code only. Is access to any other files are also required?
> 
> Also some reference to start with the porting of XEN if available with you.
> 
> Thanks & Regards,
> Ravi Pichholiya
> 
> 
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.