[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Dom0 kernel 4.14 with SMP randomly crashing





On Tue, Nov 6, 2018 at 5:47 PM Wei Liu <wei.liu2@xxxxxxxxxx> wrote:
On Tue, Nov 06, 2018 at 03:31:31PM +0530, Rishi wrote:
>
> So after knowing the stack trace, it appears that the CPU was getting stuck
> for xen_hypercall_xen_version

That hypercall is used when a PV kernel (re-)enables interrupts. See
xen_irq_enable. The purpose is to force the kernel to switch to
hypervisor.

>
> watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [swapper/0:0]
>
>
> [30569.582740] watchdog: BUG: soft lockup - CPU#0 stuck for 23s!
> [swapper/0:0]
>
> [30569.588186] Kernel panic - not syncing: softlockup: hung tasks
>
> [30569.591307] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G             L    4.19.1
> #1
>
> [30569.595110] Hardware name: Xen HVM domU, BIOS 4.4.1-xs132257 12/12/2016
>
> [30569.598356] Call Trace:
>
> [30569.599597]  <IRQ>
>
> [30569.600920]  dump_stack+0x5a/0x73
>
> [30569.602998]  panic+0xe8/0x249
>
> [30569.604806]  watchdog_timer_fn+0x200/0x230
>
> [30569.607029]  ? softlockup_fn+0x40/0x40
>
> [30569.609246]  __hrtimer_run_queues+0x133/0x270
>
> [30569.611712]  hrtimer_interrupt+0xfb/0x260
>
> [30569.613800]  xen_timer_interrupt+0x1b/0x30
>
> [30569.616972]  __handle_irq_event_percpu+0x69/0x1a0
>
> [30569.619831]  handle_irq_event_percpu+0x30/0x70
>
> [30569.622382]  handle_percpu_irq+0x34/0x50
>
> [30569.625048]  generic_handle_irq+0x1e/0x30
>
> [30569.627216]  __evtchn_fifo_handle_events+0x163/0x1a0
>
> [30569.629955]  __xen_evtchn_do_upcall+0x41/0x70
>
> [30569.632612]  xen_evtchn_do_upcall+0x27/0x50
>
> [30569.635136]  xen_do_hypervisor_callback+0x29/0x40
>
> [30569.638181] RIP: e030:xen_hypercall_xen_version+0xa/0x20

What is the asm code for this RIP?


Wei.

The issue of crash is getting resolved with appending "noirqbalance" at xen command line. This way all dom0 cpus are available but not irq balanced at xen.

Even though I'm running irqbalance service in dom0 the irqs seems to be not moving. <- this is dom0 perspective, I do not know yet, if it follows Xen irq.

I tried objdump, while I have  have the function in out but there is no asm code of it. Its just "..."

ffffffff81001220 <xen_hypercall_xen_version>:

        ...


ffffffff81001240 <xen_hypercall_console_io>:

        ...

All "hypercalls" appear similarly.

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.