[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH RESEND v1 0/7] Intel Processor Trace virtulization enabling



> > Here is a patch-series which adding Processor Trace enabling in XEN guest. 
> > You can get It's software developer manuals from:
> > https://software.intel.com/sites/default/files/managed/c5/15/architect
> > ure-instruction-set-extensions-programming-reference.pdf
> > In Chapter 5 INTEL PROCESSOR TRACE: VMX IMPROVEMENTS.
> >
> > Introduction:
> > Intel Processor Trace (Intel PT) is an extension of Intel Architecture that 
> > captures information about software execution using
> dedicated hardware facilities that cause only minimal performance 
> perturbation to the software being traced. Details on the Intel PT
> infrastructure and trace capabilities can be found in the Intel 64 and IA-32 
> Architectures Software Developer’s Manual, Volume 3C.
> >
> > The suite of architecture changes serve to simplify the process of 
> > virtualizing Intel PT for use by a guest software. There are two
> primary elements to this new architecture support for VMX support 
> improvements made for Intel PT.
> > 1. Addition of a new guest IA32_RTIT_CTL value field to the VMCS.
> >   — This serves to speed and simplify the process of disabling trace on VM 
> > exit, and restoring it on VM entry.
> > 2. Enabling use of EPT to redirect PT output.
> >   — This enables the VMM to elect to virtualize the PT output buffer using 
> > EPT. In this mode, the CPU will treat PT output
> addresses as Guest Physical Addresses (GPAs) and translate them using EPT. 
> This means that Intel PT output reads (of the ToPA
> table) and writes (of trace output) can cause EPT violations, and other 
> output events.
> >
> 
> A high level question, SDM vol 3 "Emulation of Intel PT Traced State"
> says:
> 
> "If a VMM emulates an element of processor state by taking a VM exit on reads 
> and/or writes to that piece of state, and the state
> element impacts Intel PT packet generation or values, it may be incumbent 
> upon the VMM to insert or modify the output trace
> data."
> 
> The immediately follows that paragraph is an example of CR3 causing vmexit 
> which leads to missing packet. IIRC Xen does that,
> however the code as is doesn't seem to handle that at all.

Yes, I need add some code on this. I propose if this can be handled by hardware 
but...

> 
> Another thing is Xen's vmevent allows intercepting several other traced 
> states. It seems that a more generic framework is needed to
> make PT work with vmevent subsystem? What is your thought on that?

Hi Wei,
    I am not fully clear what is the "vmevent subsystem" and what is your mean 
of " several other traced states ". 
    I guess vmevent is use VPMU collect performance counter? and save/load vpmu 
MSRs when it's scheduled?

Thanks,
Luwei Kang

> 
> Wei.
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.