[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH 0/1] drm/xen-zcopy: Add Xen zero-copy helper DRM driver



On 04/17/2018 10:59 AM, Daniel Vetter wrote:
On Mon, Apr 16, 2018 at 12:29:05PM -0700, Dongwon Kim wrote:
Yeah, I definitely agree on the idea of expanding the use case to the
general domain where dmabuf sharing is used. However, what you are
targetting with proposed changes is identical to the core design of
hyper_dmabuf.

On top of this basic functionalities, hyper_dmabuf has driver level
inter-domain communication, that is needed for dma-buf remote tracking
(no fence forwarding though), event triggering and event handling, extra
meta data exchange and hyper_dmabuf_id that represents grefs
(grefs are shared implicitly on driver level)
This really isn't a positive design aspect of hyperdmabuf imo. The core
code in xen-zcopy (ignoring the ioctl side, which will be cleaned up) is
very simple & clean.

If there's a clear need later on we can extend that. But for now xen-zcopy
seems to cover the basic use-case needs, so gets the job done.
After we decided to remove DRM PRIME code from the zcopy driver
I think we can extend the existing Xen drivers instead of introducing
a new one:
gntdev [1], [2] - to handle export/import of the dma-bufs to/from grefs
balloon [3] - to allow allocating CMA buffers
Also it is designed with frontend (common core framework) + backend
(hyper visor specific comm and memory sharing) structure for portability.
We just can't limit this feature to Xen because we want to use the same
uapis not only for Xen but also other applicable hypervisor, like ACORN.
See the discussion around udmabuf and the needs for kvm. I think trying to
make an ioctl/uapi that works for multiple hypervisors is misguided - it
likely won't work.

On top of that the 2nd hypervisor you're aiming to support is ACRN. That's
not even upstream yet, nor have I seen any patches proposing to land linux
support for ACRN. Since it's not upstream, it doesn't really matter for
upstream consideration. I'm doubting that ACRN will use the same grant
references as xen, so the same uapi won't work on ACRN as on Xen anyway.

So I am wondering we can start with this hyper_dmabuf then modify it for
your use-case if needed and polish and fix any glitches if we want to
to use this for all general dma-buf usecases.
Imo xen-zcopy is a much more reasonable starting point for upstream, which
can then be extended (if really proven to be necessary).

Also, I still have one unresolved question regarding the export/import flow
in both of hyper_dmabuf and xen-zcopy.

@danvet: Would this flow (guest1->import existing dmabuf->share underlying
pages->guest2->map shared pages->create/export dmabuf) be acceptable now?
I think if you just look at the pages, and make sure you handle the
sg_page == NULL case it's ok-ish. It's not great, but mostly it should
work. The real trouble with hyperdmabuf was the forwarding of all these
calls, instead of just passing around a list of grant references.
-Daniel

Regards,
DW
On Mon, Apr 16, 2018 at 05:33:46PM +0300, Oleksandr Andrushchenko wrote:
Hello, all!

After discussing xen-zcopy and hyper-dmabuf [1] approaches
Even more context for the discussion [4], so Xen community can
catch up
it seems that xen-zcopy can be made not depend on DRM core any more

and be dma-buf centric (which it in fact is).

The DRM code was mostly there for dma-buf's FD import/export

with DRM PRIME UAPI and with DRM use-cases in mind, but it comes out that if

the proposed 2 IOCTLs (DRM_XEN_ZCOPY_DUMB_FROM_REFS and
DRM_XEN_ZCOPY_DUMB_TO_REFS)

are extended to also provide a file descriptor of the corresponding dma-buf,
then

PRIME stuff in the driver is not needed anymore.

That being said, xen-zcopy can safely be detached from DRM and moved from

drivers/gpu/drm/xen into drivers/xen/dma-buf-backend(?).

This driver then becomes a universal way to turn any shared buffer between
Dom0/DomD

and DomU(s) into a dma-buf, e.g. one can create a dma-buf from any grant
references

or represent a dma-buf as grant-references for export.

This way the driver can be used not only for DRM use-cases, but also for
other

use-cases which may require zero copying between domains.

For example, the use-cases we are about to work in the nearest future will
use

V4L, e.g. we plan to support cameras, codecs etc. and all these will benefit

from zero copying much. Potentially, even block/net devices may benefit,

but this needs some evaluation.


I would love to hear comments for authors of the hyper-dmabuf

and Xen community, as well as DRI-Devel and other interested parties.


Thank you,

Oleksandr


On 03/29/2018 04:19 PM, Oleksandr Andrushchenko wrote:
From: Oleksandr Andrushchenko <oleksandr_andrushchenko@xxxxxxxx>

Hello!

When using Xen PV DRM frontend driver then on backend side one will need
to do copying of display buffers' contents (filled by the
frontend's user-space) into buffers allocated at the backend side.
Taking into account the size of display buffers and frames per seconds
it may result in unneeded huge data bus occupation and performance loss.

This helper driver allows implementing zero-copying use-cases
when using Xen para-virtualized frontend display driver by
implementing a DRM/KMS helper driver running on backend's side.
It utilizes PRIME buffers API to share frontend's buffers with
physical device drivers on backend's side:

  - a dumb buffer created on backend's side can be shared
    with the Xen PV frontend driver, so it directly writes
    into backend's domain memory (into the buffer exported from
    DRM/KMS driver of a physical display device)
  - a dumb buffer allocated by the frontend can be imported
    into physical device DRM/KMS driver, thus allowing to
    achieve no copying as well

For that reason number of IOCTLs are introduced:
  -  DRM_XEN_ZCOPY_DUMB_FROM_REFS
     This will create a DRM dumb buffer from grant references provided
     by the frontend
  - DRM_XEN_ZCOPY_DUMB_TO_REFS
    This will grant references to a dumb/display buffer's memory provided
    by the backend
  - DRM_XEN_ZCOPY_DUMB_WAIT_FREE
    This will block until the dumb buffer with the wait handle provided
    be freed

With this helper driver I was able to drop CPU usage from 17% to 3%
on Renesas R-Car M3 board.

This was tested with Renesas' Wayland-KMS and backend running as DRM master.

Thank you,
Oleksandr

Oleksandr Andrushchenko (1):
   drm/xen-zcopy: Add Xen zero-copy helper DRM driver

  Documentation/gpu/drivers.rst               |   1 +
  Documentation/gpu/xen-zcopy.rst             |  32 +
  drivers/gpu/drm/xen/Kconfig                 |  25 +
  drivers/gpu/drm/xen/Makefile                |   5 +
  drivers/gpu/drm/xen/xen_drm_zcopy.c         | 880 ++++++++++++++++++++++++++++
  drivers/gpu/drm/xen/xen_drm_zcopy_balloon.c | 154 +++++
  drivers/gpu/drm/xen/xen_drm_zcopy_balloon.h |  38 ++
  include/uapi/drm/xen_zcopy_drm.h            | 129 ++++
  8 files changed, 1264 insertions(+)
  create mode 100644 Documentation/gpu/xen-zcopy.rst
  create mode 100644 drivers/gpu/drm/xen/xen_drm_zcopy.c
  create mode 100644 drivers/gpu/drm/xen/xen_drm_zcopy_balloon.c
  create mode 100644 drivers/gpu/drm/xen/xen_drm_zcopy_balloon.h
  create mode 100644 include/uapi/drm/xen_zcopy_drm.h

[1]
https://lists.xenproject.org/archives/html/xen-devel/2018-02/msg01202.html
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
[1] https://elixir.bootlin.com/linux/v4.17-rc1/source/include/uapi/xen/gntdev.h
[2] https://elixir.bootlin.com/linux/v4.17-rc1/source/drivers/xen/gntdev.c
[3] https://elixir.bootlin.com/linux/v4.17-rc1/source/drivers/xen/balloon.c
[4] https://lkml.org/lkml/2018/4/16/355

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.