[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v2 11/45] ARM: timer: Handle level triggered IRQs correctly



Hi Andre,

On 03/15/2018 08:30 PM, Andre Przywara wrote:
The ARM Generic Timer uses a level-sensitive interrupt semantic. We
easily catch when the line goes high, as this triggers the hardware IRQ.
However we have to sync the state of the interrupt condition at certain
points to catch when the line goes low and we can remove the vtimer vIRQ
from the vGIC (and the LR).
The VGIC in Xen so far only implemented edge triggered vIRQs, really, so
we need to add new functionality to re-sample the interrupt state.
Do this only when the new VGIC is in use.

Signed-off-by: Andre Przywara <andre.przywara@xxxxxxxxxx>

Please address my comments from :
<fd911249-cc73-977b-9176-b5a20ae569ef@xxxxxxx>

Cheers,

---
Changelog v1 ... v2:
- restrict to new VGIC
- add TODO: comment

  xen/arch/arm/time.c     | 36 ++++++++++++++++++++++++++++++++++++
  xen/arch/arm/traps.c    | 11 +++++++++++
  xen/include/xen/timer.h |  2 ++
  3 files changed, 49 insertions(+)

diff --git a/xen/arch/arm/time.c b/xen/arch/arm/time.c
index c11fcfeadd..c0ae781ecd 100644
--- a/xen/arch/arm/time.c
+++ b/xen/arch/arm/time.c
@@ -263,6 +263,42 @@ static void vtimer_interrupt(int irq, void *dev_id, struct 
cpu_user_regs *regs)
      vgic_inject_irq(current->domain, current, current->arch.virt_timer.irq, 
true);
  }
+/**
+ * vtimer_sync() - update the state of the virtual timer after a guest run
+ * @vcpu: The VCPU to sync the arch timer state
+ *
+ * After returning from a guest, update the state of the virtual interrupt
+ * line, to model the level triggered interrupt correctly.
+ * If the guest has handled a timer interrupt, the virtual interrupt line
+ * needs to be lowered explicitly. vgic_inject_irq() takes care of that.
+ */
+void vtimer_sync(struct vcpu *vcpu)
+{
+    struct vtimer *vtimer = &vcpu->arch.virt_timer;
+    uint32_t vtimer_ctl = READ_SYSREG32(CNTV_CTL_EL0);
+    bool level;
+
+    /*
+     * Technically the mask should include the CNTx_CTL_MASK bit here,
+     * to catch if the timer interrupt is masked. However Xen always masks
+     * the timer upon entering the hypervisor, leaving it up to the guest
+     * to un-mask it. So we would always read a "low" level, despite the
+     * condition being actually "high".
+     * Ignoring the mask bit solves this (for now).
+     * Another possible check would be to compare the value of CNTVCT_EL0
+     * against vtimer->cval and derive the interrupt state from that.
+     */
+    vtimer_ctl &= (CNTx_CTL_ENABLE | CNTx_CTL_PENDING);
+    level = (vtimer_ctl == (CNTx_CTL_ENABLE | CNTx_CTL_PENDING));
+
+     /*
+      * TODO: The proper fix for this is to make vtimer vIRQ hardware mapped,
+      * but this requires reworking the arch timer to implement this.
+      */
+
+    vgic_inject_irq(vcpu->domain, vcpu, vtimer->irq, level);
+}
+
  /*
   * Arch timer interrupt really ought to be level triggered, since the
   * design of the timer/comparator mechanism is based around that
diff --git a/xen/arch/arm/traps.c b/xen/arch/arm/traps.c
index 7411bff7a7..46464d7bb9 100644
--- a/xen/arch/arm/traps.c
+++ b/xen/arch/arm/traps.c
@@ -2024,6 +2024,17 @@ static void enter_hypervisor_head(struct cpu_user_regs 
*regs)
          if ( current->arch.hcr_el2 & HCR_VA )
              current->arch.hcr_el2 = READ_SYSREG(HCR_EL2);
+#ifdef CONFIG_NEW_VGIC
+        /*
+         * We need to update the state of our emulated devices using level
+         * triggered interrupts before syncing back the VGIC state.
+         *
+         * TODO: Investigate whether this is necessary to do on every
+         * trap and how it can be optimised.
+         */
+        vtimer_sync(current);
+#endif
+
          vgic_sync_from_lrs(current);
      }
  }
diff --git a/xen/include/xen/timer.h b/xen/include/xen/timer.h
index 4513260b0d..eddbbf3903 100644
--- a/xen/include/xen/timer.h
+++ b/xen/include/xen/timer.h
@@ -94,6 +94,8 @@ DECLARE_PER_CPU(s_time_t, timer_deadline);
  /* Arch-defined function to reprogram timer hardware for new deadline. */
  int reprogram_timer(s_time_t timeout);
+void vtimer_sync(struct vcpu *vcpu);
+
  /* Calculate the aligned first tick time for a given periodic timer. */
  s_time_t align_timer(s_time_t firsttick, uint64_t period);

--
Julien Grall

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.