[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [seabios test] 118668: regressions - FAIL



flight 118668 seabios real [real]
http://logs.test-lab.xenproject.org/osstest/logs/118668/

Regressions :-(

Tests which did not succeed and are blocking,
including tests which could not be run:
 test-amd64-amd64-xl-qemuu-ws16-amd64 17 guest-stop       fail REGR. vs. 115539

Tests which did not succeed, but are not blocking:
 test-amd64-i386-xl-qemuu-win7-amd64 17 guest-stop             fail like 115539
 test-amd64-amd64-xl-qemuu-win7-amd64 17 guest-stop            fail like 115539
 test-amd64-i386-xl-qemuu-ws16-amd64 17 guest-stop             fail like 115539
 test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm 11 migrate-support-check 
fail never pass
 test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm 11 migrate-support-check 
fail never pass
 test-amd64-amd64-qemuu-nested-amd 17 debian-hvm-install/l1/l2  fail never pass
 test-amd64-amd64-xl-qemuu-win10-i386 10 windows-install        fail never pass
 test-amd64-i386-xl-qemuu-win10-i386 10 windows-install         fail never pass

version targeted for testing:
 seabios              4a6dbcea3e412fe12effa2f812f50dd7eae90955
baseline version:
 seabios              0ca6d6277dfafc671a5b3718cbeb5c78e2a888ea

Last test of basis   115539  2017-11-03 20:48:58 Z   97 days
Failing since        115733  2017-11-10 17:19:59 Z   90 days  113 attempts
Testing same since   118668  2018-02-08 04:50:43 Z    1 days    1 attempts

------------------------------------------------------------
People who touched revisions under test:
  Kevin O'Connor <kevin@xxxxxxxxxxxx>
  Marcel Apfelbaum <marcel@xxxxxxxxxx>
  Michael S. Tsirkin <mst@xxxxxxxxxx>
  Nikolay Nikolov <nickysn@xxxxxxxxxxxxxxxxxxxxx>
  Paul Menzel <pmenzel@xxxxxxxxxxxxx>
  Stefan Berger <stefanb@xxxxxxxxxxxxxxxxxx>

jobs:
 build-amd64-xsm                                              pass    
 build-i386-xsm                                               pass    
 build-amd64                                                  pass    
 build-i386                                                   pass    
 build-amd64-libvirt                                          pass    
 build-i386-libvirt                                           pass    
 build-amd64-pvops                                            pass    
 build-i386-pvops                                             pass    
 test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm           pass    
 test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm            pass    
 test-amd64-amd64-xl-qemuu-debianhvm-amd64-xsm                pass    
 test-amd64-i386-xl-qemuu-debianhvm-amd64-xsm                 pass    
 test-amd64-amd64-qemuu-nested-amd                            fail    
 test-amd64-i386-qemuu-rhel6hvm-amd                           pass    
 test-amd64-amd64-xl-qemuu-debianhvm-amd64                    pass    
 test-amd64-i386-xl-qemuu-debianhvm-amd64                     pass    
 test-amd64-amd64-xl-qemuu-win7-amd64                         fail    
 test-amd64-i386-xl-qemuu-win7-amd64                          fail    
 test-amd64-amd64-xl-qemuu-ws16-amd64                         fail    
 test-amd64-i386-xl-qemuu-ws16-amd64                          fail    
 test-amd64-amd64-xl-qemuu-win10-i386                         fail    
 test-amd64-i386-xl-qemuu-win10-i386                          fail    
 test-amd64-amd64-qemuu-nested-intel                          pass    
 test-amd64-i386-qemuu-rhel6hvm-intel                         pass    


------------------------------------------------------------
sg-report-flight on osstest.test-lab.xenproject.org
logs: /home/logs/logs
images: /home/logs/images

Logs, config files, etc. are available at
    http://logs.test-lab.xenproject.org/osstest/logs

Explanation of these reports, and of osstest in general, is at
    http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master
    http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master

Test harness code can be found at
    http://xenbits.xen.org/gitweb?p=osstest.git;a=summary


Not pushing.

------------------------------------------------------------
commit 4a6dbcea3e412fe12effa2f812f50dd7eae90955
Author: Nikolay Nikolov <nickysn@xxxxxxxxxxxxxxxxxxxxx>
Date:   Sun Feb 4 17:27:01 2018 +0200

    floppy: Use timer_check() in floppy_wait_irq()
    
    Use timer_check() instead of using floppy_motor_counter in BDA for the
    timeout check in floppy_wait_irq().
    
    The problem with using floppy_motor_counter was that, after it reaches
    0, it immediately stops the floppy motors, which is not what is
    supposed to happen on real hardware. Instead, after a timeout (like in
    the end of every floppy operation, regardless of the result - success,
    timeout or error), the floppy motors must be kept spinning for
    additional 2 seconds (the FLOPPY_MOTOR_TICKS). So, now the
    floppy_motor_counter is initialized to 255 (the max value) in the
    beginning of the floppy operation. For IRQ timeouts, a different
    timeout is used, specified by the new FLOPPY_IRQ_TIMEOUT constant
    (currently set to 5 seconds - a fairly conservative value, but should
    work reliably on most floppies).
    
    After the floppy operation, floppy_drive_pio() resets the
    floppy_motor_counter to 2 seconds (FLOPPY_MOTOR_TICKS).
    
    This is also consistent with what other PC BIOSes do.
    
    Signed-off-by: Nikolay Nikolov <nickysn@xxxxxxxxxxxxxxxxxxxxx>

commit 488ede2297461af9d60dd21cff853a49afdc2c70
Author: Nikolay Nikolov <nickysn@xxxxxxxxxxxxxxxxxxxxx>
Date:   Sun Feb 4 17:27:00 2018 +0200

    floppy: Reset the floppy motor count in floppy_drive_pio()
    
    Reset the floppy motor count, so the motor keeps spinning 2 seconds
    after a floppy operation, performed by floppy_drive_pio().
    
    Signed-off-by: Nikolay Nikolov <nickysn@xxxxxxxxxxxxxxxxxxxxx>

commit 53d82f0ee8eba571689f64b748bca8e9badda8b2
Author: Nikolay Nikolov <nickysn@xxxxxxxxxxxxxxxxxxxxx>
Date:   Sun Feb 4 17:26:59 2018 +0200

    floppy: Preserve motor and drive sel bits when resetting the floppy 
controller
    
    In case of read or write errors, the floppy system is usually reset and the
    operation is retried. In that case, the floppy motor state must be preserved
    in order to avoid creating jitter and keep the floppy motor spinning 
smoothly
    at a constant speed. Additionally, the drive select bits should probably 
also
    be preserved, because some systems might need a small delay after selecting 
a
    new drive. In that case, the operation would be retried, without changing
    the currently selected drive.
    
    In floppy_enable_controller(), the IRQ bit is now enabled first, before the
    reset bit is set. I'm not completely sure whether this is necessary. It is
    done just in case some hardware introduces a delay between setting this bit
    and actually enabling the IRQ, which would cause us to miss the IRQ, sent by
    the controller immediately after reset.
    
    Signed-off-by: Nikolay Nikolov <nickysn@xxxxxxxxxxxxxxxxxxxxx>

commit 53fc631307b2c4a403e183afcc5ffe27987349a6
Author: Nikolay Nikolov <nickysn@xxxxxxxxxxxxxxxxxxxxx>
Date:   Sun Feb 4 17:26:58 2018 +0200

    floppy: Introduce FLOPPY_DOR_XXX constants
    
    Signed-off-by: Nikolay Nikolov <nickysn@xxxxxxxxxxxxxxxxxxxxx>

commit 5157a7882de8b50c2365fd9166c5d91861a478a2
Author: Nikolay Nikolov <nickysn@xxxxxxxxxxxxxxxxxxxxx>
Date:   Sun Feb 4 17:26:57 2018 +0200

    floppy: Introduce floppy_dor_mask()
    
    Signed-off-by: Nikolay Nikolov <nickysn@xxxxxxxxxxxxxxxxxxxxx>

commit 3ddb42f38f5054aa6eed7971f10da0adc076c74e
Author: Nikolay Nikolov <nickysn@xxxxxxxxxxxxxxxxxxxxx>
Date:   Sun Feb 4 17:26:56 2018 +0200

    floppy: Introduce the floppy_dor_read() function
    
    Signed-off-by: Nikolay Nikolov <nickysn@xxxxxxxxxxxxxxxxxxxxx>

commit 14d91c353e19b7085fdbb7b2dcc43f3355665670
Author: Marcel Apfelbaum <marcel@xxxxxxxxxx>
Date:   Thu Jan 11 22:15:12 2018 +0200

    pci: fix 'io hints' capability for RedHat PCI bridges
    
    Commit ec6cb17f (pci: enable RedHat PCI bridges to reserve additional
                     resources on PCI init)
    added a new vendor specific PCI capability for RedHat PCI bridges
    allowing them to reserve additional buses and/or IO/MEM space.
    
    When adding the IO hints PCI capability to the pcie-root-port
    without specifying a value for bus reservation, the subordinate bus
    computation is wrong and the guest kernel gets messed up.
    
    Fix it by returning to prev code if the value for bus
    reservation is not set.
    
    Removed also a wrong debug print "PCI: invalid QEMU resource reserve
    cap offset" which appears if the 'IO hints' capability is not present.
    
    Acked-by: Michael S. Tsirkin <mst@xxxxxxxxxx>
    Signed-off-by: Marcel Apfelbaum <marcel@xxxxxxxxxx>

commit 844b86464a5cbfffb62b87808632018ca250d867
Author: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
Date:   Mon Oct 2 08:13:13 2017 +0200

    docs/Download: Use more secure HTTPS URLs where possible
    
    Signed-off-by: Paul Menzel <pmenzel@xxxxxxxxxxxxx>

commit df46d10c8a7b88eb82f3ceb2aa31782dee15593d
Author: Stefan Berger <stefanb@xxxxxxxxxxxxxxxxxx>
Date:   Tue Nov 14 15:03:47 2017 -0500

    tpm: Add support for TPM2 ACPI table
    
    Add support for the TPM2 ACPI table. If we find it and its
    of the appropriate size, we can get the log_area_start_address
    and log_area_minimum_size from it.
    
    The latest version of the spec can be found here:
    
    https://trustedcomputinggroup.org/tcg-acpi-specification/
    
    Signed-off-by: Stefan Berger <stefanb@xxxxxxxxxxxxxxxxxx>

commit 0541f2f0f246e77d7c726926976920e8072d1119
Author: Kevin O'Connor <kevin@xxxxxxxxxxxx>
Date:   Fri Nov 10 12:20:35 2017 -0500

    paravirt: Only enable sercon in NOGRAPHIC mode if no other console specified
    
    Signed-off-by: Kevin O'Connor <kevin@xxxxxxxxxxxx>

commit 9ce6778f08c632c52b25bc8f754291ef18710d53
Author: Kevin O'Connor <kevin@xxxxxxxxxxxx>
Date:   Fri Nov 10 12:16:36 2017 -0500

    docs: Add sercon-port to Runtime_config.md documentation
    
    Signed-off-by: Kevin O'Connor <kevin@xxxxxxxxxxxx>

commit 63451fca13c75870e1703eb3e20584d91179aebc
Author: Kevin O'Connor <kevin@xxxxxxxxxxxx>
Date:   Fri Nov 10 11:49:19 2017 -0500

    docs: Note v1.11.0 release
    
    Signed-off-by: Kevin O'Connor <kevin@xxxxxxxxxxxx>

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.