[ 0.000000] Linux version 4.9.0-5-amd64 (debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.65-3+deb9u2 (2018-01-04) [ 0.000000] Command line: placeholder root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro rootdelay=10 rootdelay=10 noquiet nosplash acpi=off [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] Released 0 page(s) [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] Xen: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] Xen: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x000000000009e000-0x000000000009efff] reserved [ 0.000000] Xen: [mem 0x000000000009f000-0x000000000009ffff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x00000000881c5fff] usable [ 0.000000] Xen: [mem 0x00000000881c6000-0x00000000881c6fff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000881c7000-0x0000000088210fff] reserved [ 0.000000] Xen: [mem 0x0000000088211000-0x0000000088282fff] usable [ 0.000000] Xen: [mem 0x0000000088283000-0x0000000088302fff] type 20 [ 0.000000] Xen: [mem 0x0000000088303000-0x0000000089ec1fff] reserved [ 0.000000] Xen: [mem 0x0000000089ec2000-0x0000000089f99fff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000089f9a000-0x0000000089ffefff] ACPI data [ 0.000000] Xen: [mem 0x0000000089fff000-0x0000000089ffffff] usable [ 0.000000] Xen: [mem 0x000000008a000000-0x000000008bffffff] reserved [ 0.000000] Xen: [mem 0x0000000090000000-0x0000000095ffffff] reserved [ 0.000000] Xen: [mem 0x0000000098000000-0x000000009dffffff] reserved [ 0.000000] Xen: [mem 0x00000000e00fa000-0x00000000e00fafff] reserved [ 0.000000] Xen: [mem 0x00000000e00fd000-0x00000000e00fdfff] reserved [ 0.000000] Xen: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x0000000861ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI not present or invalid. [ 0.000000] Hypervisor detected: Xen [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x862000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR: Disabled [ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000000] e820: last_pfn = 0x8a000 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] BRK [0x01f36000, 0x01f36fff] PGTABLE [ 0.000000] BRK [0x01f37000, 0x01f37fff] PGTABLE [ 0.000000] BRK [0x01f38000, 0x01f38fff] PGTABLE [ 0.000000] BRK [0x01f39000, 0x01f39fff] PGTABLE [ 0.000000] BRK [0x01f3a000, 0x01f3afff] PGTABLE [ 0.000000] BRK [0x01f3b000, 0x01f3bfff] PGTABLE [ 0.000000] BRK [0x01f3c000, 0x01f3cfff] PGTABLE [ 0.000000] BRK [0x01f3d000, 0x01f3dfff] PGTABLE [ 0.000000] BRK [0x01f3e000, 0x01f3efff] PGTABLE [ 0.000000] BRK [0x01f3f000, 0x01f3ffff] PGTABLE [ 0.000000] BRK [0x01f40000, 0x01f40fff] PGTABLE [ 0.000000] BRK [0x01f41000, 0x01f41fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x02000000-0x0338efff] [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000861ffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x7cbc65000-0x7cbc69fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x0000000861ffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x000000000009f000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000881c5fff] [ 0.000000] node 0: [mem 0x0000000088211000-0x0000000088282fff] [ 0.000000] node 0: [mem 0x0000000089fff000-0x0000000089ffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000861ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000861ffffff] [ 0.000000] On node 0 totalpages: 8298966 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8649 pages used for memmap [ 0.000000] DMA32 zone: 553529 pages, LIFO batch:31 [ 0.000000] Normal zone: 120960 pages used for memmap [ 0.000000] Normal zone: 7741440 pages, LIFO batch:31 [ 0.000000] p2m virtual area at ffffc90000000000, size is 40000000 [ 0.000000] Remapped 491049 page(s) [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org [ 0.000000] smpboot: Boot CPU (id 255) not listed by BIOS [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x881c6000-0x881c6fff] [ 0.000000] PM: Registered nosave memory: [mem 0x881c7000-0x88210fff] [ 0.000000] PM: Registered nosave memory: [mem 0x88283000-0x88302fff] [ 0.000000] PM: Registered nosave memory: [mem 0x88303000-0x89ec1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x89ec2000-0x89f99fff] [ 0.000000] PM: Registered nosave memory: [mem 0x89f9a000-0x89ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0x8a000000-0x8bffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x8c000000-0x8fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0x95ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x96000000-0x97ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x98000000-0x9dffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9e000000-0xe00f9fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00fa000-0xe00fafff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00fb000-0xe00fcfff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00fd000-0xe00fdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00fe000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff] [ 0.000000] e820: [mem 0x9e000000-0xe00f9fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.8.3-pre (preserve-AD) [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] percpu: Embedded 35 pages/cpu @ffff880843800000 s105304 r8192 d29864 u2097152 [ 0.000000] pcpu-alloc: s105304 r8192 d29864 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] xen: PV spinlocks enabled [ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8169272 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: placeholder root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro rootdelay=10 rootdelay=10 noquiet nosplash acpi=off [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] software IO TLB [mem 0x83f800000-0x843800000] (64MB) mapped at [ffff88083f800000-ffff8808437fffff] [ 0.000000] Memory: 31943512K/33195864K available (6196K kernel code, 1159K rwdata, 2848K rodata, 1408K init, 688K bss, 1252352K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1 [ 0.000000] Using NULL legacy PIC [ 0.000000] NR_IRQS:33024 nr_irqs:32 0 [ 0.000000] xen:events: Using FIFO-based ABI [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] tsc: Detected 3800.000 MHz processor [ 3.285631] Calibrating delay loop (skipped), value calculated using timer frequency.. 7584.11 BogoMIPS (lpj=15168224) [ 3.285635] pid_max: default: 32768 minimum: 301 [ 3.285820] Security Framework initialized [ 3.285822] Yama: disabled by default; enable with sysctl kernel.yama.* [ 3.285827] AppArmor: AppArmor disabled by boot time parameter [ 3.288525] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 3.292764] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 3.294288] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 3.294330] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 3.294555] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 3.294557] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 3.294562] CPU: Physical Processor ID: 0 [ 3.294563] CPU: Processor Core ID: 0 [ 3.294567] mce: CPU supports 2 MCE banks [ 3.294581] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 3.294583] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 3.309350] Freeing SMP alternatives memory: 24K [ 3.310349] ftrace: allocating 25212 entries in 99 pages [ 3.316354] cpu 0 spinlock event irq 1 [ 3.316358] smpboot: Max logical packages: 1 [ 3.316360] VPMU disabled by hypervisor. [ 3.316368] Performance Events: Skylake events, PMU not available due to virtualization, using software events only. [ 3.316724] NMI watchdog: disabled (cpu0): hardware events not enabled [ 3.316726] NMI watchdog: Shutting down hard lockup detector on all cpus [ 3.316733] x86: Booted up 1 node, 1 CPUs [ 3.317212] devtmpfs: initialized [ 3.317243] x86/mm: Memory block size: 128MB [ 3.320135] PM: Registering ACPI NVS region [mem 0x881c6000-0x881c6fff] (4096 bytes) [ 3.320139] PM: Registering ACPI NVS region [mem 0x89ec2000-0x89f99fff] (884736 bytes) [ 3.320170] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 3.320177] futex hash table entries: 256 (order: 2, 16384 bytes) [ 3.320193] pinctrl core: initialized pinctrl subsystem [ 3.320248] NET: Registered protocol family 16 [ 3.320254] xen:grant_table: Grant tables using version 1 layout [ 3.320259] Grant table initialized [ 3.320425] PCI: Using configuration type 1 for base access [ 3.321149] ACPI: Interpreter disabled. [ 3.321154] xen:balloon: Initialising balloon driver [ 3.323552] xen_balloon: Initialising balloon driver [ 3.323588] vgaarb: loaded [ 3.323604] dmi: Firmware registration failed. [ 3.323620] PCI: Probing PCI hardware [ 3.323622] PCI: root bus 00: using default resources [ 3.323623] PCI: Probing PCI hardware (bus 00) [ 3.323636] PCI host bridge to bus 0000:00 [ 3.323639] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.323641] pci_bus 0000:00: root bus resource [mem 0x00000000-0x7fffffffff] [ 3.323643] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 3.323654] pci 0000:00:00.0: [8086:5918] type 00 class 0x060000 [ 3.323800] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330 [ 3.323825] pci 0000:00:14.0: reg 0x10: [mem 0xa0d00000-0xa0d0ffff 64bit] [ 3.323916] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 3.323966] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000 [ 3.323991] pci 0000:00:14.2: reg 0x10: [mem 0x8bff01000-0x8bff01fff 64bit] [ 3.324143] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000 [ 3.324182] pci 0000:00:16.0: reg 0x10: [mem 0xa0d17000-0xa0d17fff 64bit] [ 3.324319] pci 0000:00:16.0: PME# supported from D3hot [ 3.324405] pci 0000:00:16.1: [8086:a13b] type 00 class 0x078000 [ 3.324449] pci 0000:00:16.1: reg 0x10: [mem 0xa0d16000-0xa0d16fff 64bit] [ 3.324612] pci 0000:00:16.1: PME# supported from D3hot [ 3.324702] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601 [ 3.324722] pci 0000:00:17.0: reg 0x10: [mem 0xa0d14000-0xa0d15fff] [ 3.324732] pci 0000:00:17.0: reg 0x14: [mem 0xa0d19000-0xa0d190ff] [ 3.324742] pci 0000:00:17.0: reg 0x18: [io 0x5040-0x5047] [ 3.324751] pci 0000:00:17.0: reg 0x1c: [io 0x5048-0x504b] [ 3.324761] pci 0000:00:17.0: reg 0x20: [io 0x5020-0x503f] [ 3.324771] pci 0000:00:17.0: reg 0x24: [mem 0xa0d18000-0xa0d187ff] [ 3.324825] pci 0000:00:17.0: PME# supported from D3hot [ 3.324888] pci 0000:00:1d.0: [8086:a119] type 01 class 0x060400 [ 3.324966] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 3.325013] pci 0000:00:1d.2: [8086:a11a] type 01 class 0x060400 [ 3.325092] pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold [ 3.325135] pci 0000:00:1d.3: [8086:a11b] type 01 class 0x060400 [ 3.325214] pci 0000:00:1d.3: PME# supported from D0 D3hot D3cold [ 3.325271] pci 0000:00:1f.0: [8086:a149] type 00 class 0x060100 [ 3.325432] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000 [ 3.325443] pci 0000:00:1f.2: reg 0x10: [mem 0xa0d10000-0xa0d13fff] [ 3.325538] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500 [ 3.325577] pci 0000:00:1f.4: reg 0x10: [mem 0x8bff00000-0x8bff000ff 64bit] [ 3.325627] pci 0000:00:1f.4: reg 0x20: [io 0x5000-0x501f] [ 3.325783] pci 0000:01:00.0: [102b:0522] type 00 class 0x030000 [ 3.325804] pci 0000:01:00.0: reg 0x10: [mem 0x9f000000-0x9fffffff pref] [ 3.325820] pci 0000:01:00.0: reg 0x14: [mem 0xa0800000-0xa0803fff] [ 3.325836] pci 0000:01:00.0: reg 0x18: [mem 0xa0000000-0xa07fffff] [ 3.325898] pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 3.326039] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 3.326046] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 3.326058] pci 0000:00:1d.0: PCI bridge to [bus 01] [ 3.326065] pci 0000:00:1d.0: bridge window [mem 0xa0000000-0xa08fffff] [ 3.326070] pci 0000:00:1d.0: bridge window [mem 0x9f000000-0x9fffffff 64bit pref] [ 3.326141] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000 [ 3.326162] pci 0000:02:00.0: reg 0x10: [mem 0xa0b00000-0xa0bfffff] [ 3.326194] pci 0000:02:00.0: reg 0x18: [io 0x4000-0x401f] [ 3.326210] pci 0000:02:00.0: reg 0x1c: [mem 0xa0c00000-0xa0c03fff] [ 3.326344] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 3.336359] pci 0000:00:1d.2: PCI bridge to [bus 02] [ 3.336363] pci 0000:00:1d.2: bridge window [io 0x4000-0x4fff] [ 3.336366] pci 0000:00:1d.2: bridge window [mem 0xa0b00000-0xa0cfffff] [ 3.336444] pci 0000:03:00.0: [8086:1533] type 00 class 0x020000 [ 3.336465] pci 0000:03:00.0: reg 0x10: [mem 0xa0900000-0xa09fffff] [ 3.336497] pci 0000:03:00.0: reg 0x18: [io 0x3000-0x301f] [ 3.336513] pci 0000:03:00.0: reg 0x1c: [mem 0xa0a00000-0xa0a03fff] [ 3.336648] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 3.348366] pci 0000:00:1d.3: PCI bridge to [bus 03] [ 3.348371] pci 0000:00:1d.3: bridge window [io 0x3000-0x3fff] [ 3.348374] pci 0000:00:1d.3: bridge window [mem 0xa0900000-0xa0afffff] [ 3.348399] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 03 [ 3.348766] PCI: pci_cache_line_size set to 64 bytes [ 3.348858] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 3.348859] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 3.348860] e820: reserve RAM buffer [mem 0x881c6000-0x8bffffff] [ 3.348860] e820: reserve RAM buffer [mem 0x88283000-0x8bffffff] [ 3.348861] e820: reserve RAM buffer [mem 0x8a000000-0x8bffffff] [ 3.348861] e820: reserve RAM buffer [mem 0x862000000-0x863ffffff] [ 3.348942] clocksource: Switched to clocksource xen [ 3.352624] VFS: Disk quotas dquot_6.6.0 [ 3.352633] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.352645] hugetlbfs: disabling because there are no supported hugepage sizes [ 3.352661] pnp: PnP ACPI: disabled [ 3.353303] pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 3.353333] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0810000-0xa081ffff pref] [ 3.353336] pci 0000:00:1d.0: PCI bridge to [bus 01] [ 3.353342] pci 0000:00:1d.0: bridge window [mem 0xa0000000-0xa08fffff] [ 3.353346] pci 0000:00:1d.0: bridge window [mem 0x9f000000-0x9fffffff 64bit pref] [ 3.353353] pci 0000:00:1d.2: PCI bridge to [bus 02] [ 3.353356] pci 0000:00:1d.2: bridge window [io 0x4000-0x4fff] [ 3.353362] pci 0000:00:1d.2: bridge window [mem 0xa0b00000-0xa0cfffff] [ 3.353371] pci 0000:00:1d.3: PCI bridge to [bus 03] [ 3.353374] pci 0000:00:1d.3: bridge window [io 0x3000-0x3fff] [ 3.353379] pci 0000:00:1d.3: bridge window [mem 0xa0900000-0xa0afffff] [ 3.353388] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 3.353389] pci_bus 0000:00: resource 5 [mem 0x00000000-0x7fffffffff] [ 3.353390] pci_bus 0000:01: resource 1 [mem 0xa0000000-0xa08fffff] [ 3.353390] pci_bus 0000:01: resource 2 [mem 0x9f000000-0x9fffffff 64bit pref] [ 3.353391] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 3.353391] pci_bus 0000:02: resource 1 [mem 0xa0b00000-0xa0cfffff] [ 3.353392] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 3.353393] pci_bus 0000:03: resource 1 [mem 0xa0900000-0xa0afffff] [ 3.353408] NET: Registered protocol family 2 [ 3.353629] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 3.353875] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 3.353948] TCP: Hash tables configured (established 262144 bind 65536) [ 3.353993] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 3.354071] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 3.354126] NET: Registered protocol family 1 [ 3.354141] pci 0000:00:14.0: can't find IRQ for PCI INT A; please try using pci=biosirq [ 3.354529] PCI: CLS 128 bytes, default 64 [ 3.354551] Unpacking initramfs... [ 3.568900] Freeing initrd memory: 20028K [ 3.568988] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 3.569109] audit: initializing netlink subsys (disabled) [ 3.569121] audit: type=2000 audit(1516697156.038:1): initialized [ 3.569311] workingset: timestamp_bits=40 max_order=23 bucket_order=0 [ 3.569322] zbud: loaded [ 3.569602] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 3.569614] io scheduler noop registered [ 3.569616] io scheduler deadline registered [ 3.569622] io scheduler cfq registered (default) [ 3.569655] pcieport 0000:00:1d.0: can't find IRQ for PCI INT B; please try using pci=biosirq [ 3.569750] pcieport 0000:00:1d.2: can't find IRQ for PCI INT C; please try using pci=biosirq [ 3.569830] pcieport 0000:00:1d.3: can't find IRQ for PCI INT D; please try using pci=biosirq [ 3.569926] pcieport 0000:00:1d.0: Signaling PME through PCIe PME interrupt [ 3.569929] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.569933] pcie_pme 0000:00:1d.0:pcie001: service driver pcie_pme loaded [ 3.569946] pcieport 0000:00:1d.2: Signaling PME through PCIe PME interrupt [ 3.569948] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 3.569953] pcie_pme 0000:00:1d.2:pcie001: service driver pcie_pme loaded [ 3.569964] pcieport 0000:00:1d.3: Signaling PME through PCIe PME interrupt [ 3.569966] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 3.569971] pcie_pme 0000:00:1d.3:pcie001: service driver pcie_pme loaded [ 3.569974] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.569978] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 3.569985] intel_idle: MWAIT substates: 0x142120 [ 3.569986] intel_idle: v0.4.1 model 0x9E [ 3.569987] intel_idle: intel_idle yielding to none [ 3.570150] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.591185] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.591350] Linux agpgart interface v0.103 [ 3.591372] AMD IOMMUv2 driver by Joerg Roedel [ 3.591374] AMD IOMMUv2 functionality not available on this system [ 3.591423] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 4.679429] i8042: No controller found [ 4.679435] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d5210d88ec, max_idle_ns: 881591073901 ns [ 4.679465] mousedev: PS/2 mouse device common for all mice [ 4.679780] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 4.679833] genirq: Flags mismatch irq 8. 00000080 (rtc0) vs. 00000000 (xen-pcpu) [ 4.679848] rtc_cmos: probe of rtc_cmos failed with error -16 [ 4.679853] intel_pstate: Intel P-state driver initializing [ 4.679865] ledtrig-cpu: registered to indicate activity on CPUs [ 4.679867] dmi-sysfs: dmi entry is absent. [ 4.679918] NET: Registered protocol family 10 [ 4.680011] mip6: Mobile IPv6 [ 4.680013] NET: Registered protocol family 17 [ 4.680015] mpls_gso: MPLS GSO support [ 4.680041] mce: Unable to init device /dev/mcelog (rc: -16) [ 4.680069] microcode: sig=0x906e9, pf=0x2, revision=0x5e [ 4.680085] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 4.680135] registered taskstats version 1 [ 4.680142] zswap: loaded using pool lzo/zbud [ 4.680194] ima: No TPM chip found, activating TPM-bypass! [ 4.680364] hctosys: unable to open rtc device (rtc0) [ 4.680397] PM: Hibernation image not present or could not be loaded. [ 4.680622] Freeing unused kernel memory: 1408K [ 4.680624] Write protecting the kernel read-only data: 12288k [ 4.682593] Freeing unused kernel memory: 1980K [ 4.682857] Freeing unused kernel memory: 1248K [ 4.703174] x86/mm: Checked W+X mappings: FAILED, 4090 W+X pages found. [ 4.719646] random: udevadm: uninitialized urandom read (16 bytes read) [ 4.719676] random: udevadm: uninitialized urandom read (16 bytes read) [ 4.720221] random: udevadm: uninitialized urandom read (16 bytes read) [ 4.720263] random: udevadm: uninitialized urandom read (16 bytes read) [ 4.720303] random: udevadm: uninitialized urandom read (16 bytes read) [ 4.720342] random: udevadm: uninitialized urandom read (16 bytes read) [ 4.720383] random: udevadm: uninitialized urandom read (16 bytes read) [ 4.720424] random: udevadm: uninitialized urandom read (16 bytes read) [ 4.720461] random: udevadm: uninitialized urandom read (16 bytes read) [ 4.720500] random: udevadm: uninitialized urandom read (16 bytes read) [ 4.742881] SCSI subsystem initialized [ 4.747777] usbcore: registered new interface driver usbfs [ 4.747784] usbcore: registered new interface driver hub [ 4.749887] usbcore: registered new device driver usb [ 4.750536] xhci_hcd 0000:00:14.0: can't find IRQ for PCI INT A; please try using pci=biosirq [ 4.750564] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.750568] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 4.751635] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 [ 4.751642] xhci_hcd 0000:00:14.0: cache line size of 128 is not supported [ 4.752412] pps_core: LinuxPPS API ver. 1 registered [ 4.752415] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 4.752527] PTP clock support registered [ 4.752623] dca service started, version 1.12.1 [ 4.753366] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 4.753368] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.753396] igb 0000:02:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq [ 4.754087] igb 0000:02:00.0: PHY reset is blocked due to SOL/IDER session. [ 4.756562] libata version 3.00 loaded. [ 4.758898] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.758901] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.758904] usb usb1: Product: xHCI Host Controller [ 4.758906] usb usb1: Manufacturer: Linux 4.9.0-5-amd64 xhci-hcd [ 4.758908] usb usb1: SerialNumber: 0000:00:14.0 [ 4.758967] hub 1-0:1.0: USB hub found [ 4.758983] hub 1-0:1.0: 16 ports detected [ 4.759739] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.759742] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 4.759764] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.759766] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.759769] usb usb2: Product: xHCI Host Controller [ 4.759770] usb usb2: Manufacturer: Linux 4.9.0-5-amd64 xhci-hcd [ 4.759772] usb usb2: SerialNumber: 0000:00:14.0 [ 4.760127] hub 2-0:1.0: USB hub found [ 4.760141] hub 2-0:1.0: 10 ports detected [ 4.760563] ACPI: : failed to evaluate _DSM (0x1001) [ 4.760577] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003) [ 4.760589] i801_smbus 0000:00:1f.4: can't find IRQ for PCI INT A; please try using pci=biosirq [ 4.760606] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 4.760622] genirq: Flags mismatch irq 0. 00000080 (i801_smbus) vs. 0003ce00 (timer0) [ 4.760625] i801_smbus 0000:00:1f.4: Failed to allocate irq 0: -16 [ 4.760627] i801_smbus 0000:00:1f.4: SMBus using polling [ 4.760786] ahci 0000:00:17.0: version 3.0 [ 4.760794] ahci 0000:00:17.0: can't find IRQ for PCI INT A; please try using pci=biosirq [ 4.762635] AVX2 version of gcm_enc/dec engaged. [ 4.762637] AES CTR mode by8 optimization enabled [ 4.770945] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 4.770949] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst [ 4.778403] pps pps0: new PPS source ptp0 [ 4.778406] igb 0000:02:00.0: added PHC on eth0 [ 4.778408] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection [ 4.778410] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) a4:bf:01:1f:a0:00 [ 4.778459] igb 0000:02:00.0: eth0: PBA No: 006200-000 [ 4.778461] igb 0000:02:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) [ 4.778533] igb 0000:03:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq [ 4.779219] igb 0000:03:00.0: PHY reset is blocked due to SOL/IDER session. [ 4.802837] pps pps1: new PPS source ptp1 [ 4.802840] igb 0000:03:00.0: added PHC on eth1 [ 4.802842] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection [ 4.802844] igb 0000:03:00.0: eth1: (PCIe:2.5Gb/s:Width x1) a4:bf:01:1f:a0:01 [ 4.802893] igb 0000:03:00.0: eth1: PBA No: 006200-000 [ 4.802895] igb 0000:03:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) [ 4.805179] igb 0000:02:00.0 enp2s0: renamed from eth0 [ 4.807764] igb 0000:03:00.0 enp3s0: renamed from eth1 [ 4.853908] scsi host0: ahci [ 4.854029] scsi host1: ahci [ 4.854140] scsi host2: ahci [ 4.854250] scsi host3: ahci [ 4.854361] scsi host4: ahci [ 4.854469] scsi host5: ahci [ 4.854578] scsi host6: ahci [ 4.854687] scsi host7: ahci [ 4.854713] ata1: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18100 irq 18 [ 4.854716] ata2: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18180 irq 18 [ 4.854719] ata3: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18200 irq 18 [ 4.854722] ata4: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18280 irq 18 [ 4.854725] ata5: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18300 irq 18 [ 4.854728] ata6: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18380 irq 18 [ 4.854731] ata7: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18400 irq 18 [ 4.854734] ata8: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18480 irq 18 [ 5.084947] usb 1-1: new full-speed USB device number 2 using xhci_hcd [ 5.167122] ata3: SATA link down (SStatus 0 SControl 300) [ 5.167139] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.167151] ata4: SATA link down (SStatus 0 SControl 300) [ 5.167164] ata8: SATA link down (SStatus 0 SControl 300) [ 5.167178] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.167189] ata5: SATA link down (SStatus 0 SControl 300) [ 5.171107] ata7: SATA link down (SStatus 0 SControl 300) [ 5.171120] ata6: SATA link down (SStatus 0 SControl 300) [ 5.185427] ata1.00: ATA-9: HGST HUS726040ALA610, A5GNT920, max UDMA/133 [ 5.185429] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 5.185723] ata2.00: ATA-9: HGST HUS726040ALA610, A5GNT920, max UDMA/133 [ 5.185725] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 5.190991] ata1.00: configured for UDMA/133 [ 5.191049] scsi 0:0:0:0: Direct-Access ATA HGST HUS726040AL T920 PQ: 0 ANSI: 5 [ 5.191290] ata2.00: configured for UDMA/133 [ 5.191335] scsi 1:0:0:0: Direct-Access ATA HGST HUS726040AL T920 PQ: 0 ANSI: 5 [ 5.194206] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 5.194213] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 5.194236] sd 0:0:0:0: [sda] Write Protect is off [ 5.194238] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.194241] sd 1:0:0:0: [sdb] Write Protect is off [ 5.194243] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.194251] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.194256] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.240713] sda: sda1 sda2 sda3 sda4 [ 5.240856] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.242292] sdb: sdb1 sdb2 sdb3 sdb4 [ 5.242682] sd 1:0:0:0: [sdb] Attached SCSI disk [ 5.246039] usb 1-1: New USB device found, idVendor=046b, idProduct=ff10 [ 5.246042] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.246044] usb 1-1: Product: Virtual Keyboard and Mouse [ 5.246046] usb 1-1: Manufacturer: American Megatrends Inc. [ 5.246048] usb 1-1: SerialNumber: serial [ 5.247891] hidraw: raw HID events driver (C) Jiri Kosina [ 5.249601] usbcore: registered new interface driver usbhid [ 5.249603] usbhid: USB HID core driver [ 5.250150] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046B:FF10.0001/input/input0 [ 5.250804] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-1/input0 [ 5.250879] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046B:FF10.0002/input/input1 [ 5.250914] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-1/input1 [ 5.339325] random: fast init done [ 5.440252] md: bind [ 5.508791] md: bind [ 5.565775] md: raid1 personality registered for level 1 [ 5.565947] md/raid1:md4: active with 2 out of 2 mirrors [ 5.566153] created bitmap (29 pages) for device md4 [ 5.566786] md4: bitmap initialized from disk: read 2 pages, set 0 of 59234 bits [ 5.580596] md: bind [ 5.602555] md4: detected capacity change from 0 to 3975079198720 [ 5.604621] md: bind [ 5.607062] md/raid1:md2: active with 2 out of 2 mirrors [ 5.607073] md2: detected capacity change from 0 to 20970405888 [ 5.690051] clocksource: Switched to clocksource tsc [ 5.835355] device-mapper: uevent: version 1.0.3 [ 5.835517] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@xxxxxxxxxx [ 6.847797] random: crng init done [ 7.524866] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 7.524870] e100: Copyright(c) 1999-2006 Intel Corporation [ 7.528421] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 7.531445] sis900.c: v1.08.10 Apr. 2 2006 [ 7.534495] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker [ 7.538602] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 7.538604] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 7.542133] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 7.542136] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 7.552761] sky2: driver version 1.30 [ 7.555759] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 7.570351] megasas: 06.811.02.00-rc1 [ 7.596280] md: raid0 personality registered for level 0 [ 7.664945] raid6: sse2x1 gen() 13408 MB/s [ 7.732944] raid6: sse2x1 xor() 9482 MB/s [ 7.800943] raid6: sse2x2 gen() 16702 MB/s [ 7.868945] raid6: sse2x2 xor() 11559 MB/s [ 7.936945] raid6: sse2x4 gen() 19278 MB/s [ 8.004944] raid6: sse2x4 xor() 13312 MB/s [ 8.072944] raid6: avx2x1 gen() 26501 MB/s [ 8.140944] raid6: avx2x2 gen() 31391 MB/s [ 8.208944] raid6: avx2x4 gen() 33433 MB/s [ 8.208945] raid6: using algorithm avx2x4 gen() 33433 MB/s [ 8.208947] raid6: using avx2x2 recovery algorithm [ 8.210746] xor: automatically using best checksumming function avx [ 8.211163] async_tx: api initialized (async) [ 8.216494] md: raid6 personality registered for level 6 [ 8.216497] md: raid5 personality registered for level 5 [ 8.216498] md: raid4 personality registered for level 4 [ 8.222164] Fusion MPT base driver 3.04.20 [ 8.222167] Copyright (c) 1999-2008 LSI Corporation [ 8.223206] Fusion MPT SPI Host driver 3.04.20 [ 8.229819] Fusion MPT SAS Host driver 3.04.20 [ 8.235960] Fusion MPT misc device (ioctl) driver 3.04.20 [ 8.236313] mptctl: Registered with Fusion MPT base driver [ 8.236316] mptctl: /dev/mptctl @ (major,minor=10,220) [ 8.250898] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 8.250902] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 8.257093] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 8.260299] QLogic/NetXen Network Driver v4.0.82 [ 8.266578] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.268993] uhci_hcd: USB Universal Host Controller Interface driver [ 8.272109] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 8.275580] md: linear personality registered for level -1 [ 8.277850] md: multipath personality registered for level -4 [ 8.287025] md: raid10 personality registered for level 10 [ 18.297450] Btrfs loaded, crc32c=crc32c-intel [ 22.265076] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: (null) [ 22.861676] ip_tables: (C) 2000-2006 Netfilter Core Team [ 22.881329] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 22.881362] systemd[1]: Detected virtualization xen. [ 22.881367] systemd[1]: Detected architecture x86-64. [ 22.914477] systemd[1]: Set hostname to . [ 23.271620] systemd[1]: bind9.service: Cannot add dependency job, ignoring: Unit bind9.service is masked. [ 23.271904] systemd[1]: Listening on fsck to fsckd communication Socket. [ 23.271997] systemd[1]: Listening on udev Kernel Socket. [ 23.272114] systemd[1]: Created slice System Slice. [ 23.272210] systemd[1]: Created slice system-getty.slice. [ 23.272300] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 23.426245] EXT4-fs (md2): re-mounted. Opts: errors=remount-ro [ 23.533340] systemd-journald[599]: Received request to flush runtime journal from PID 1 [ 23.789438] igb 0000:02:00.0 enp2s0: igb: enp2s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 23.913654] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 23.913663] mei_me 0000:00:16.1: Device doesn't have valid ME Interface [ 23.917048] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 23.952936] iTCO_vendor_support: vendor-support=0 [ 23.962720] [drm] Initialized [ 23.964739] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 23.964838] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 23.965564] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 23.965582] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 23.975964] igb 0000:03:00.0 eno2: renamed from enp3s0 [ 24.014351] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 24.022813] mgag200 0000:01:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq [ 24.042499] [TTM] Zone kernel: Available graphics memory: 15984100 kiB [ 24.042501] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 24.042503] [TTM] Initializing pool allocator [ 24.042507] [TTM] Initializing DMA pool allocator [ 24.074527] Console: switching to colour frame buffer device 128x48 [ 24.362960] mgag200 0000:01:00.0: fb0: mgadrmfb frame buffer device [ 24.366114] [drm] Initialized mgag200 1.0.0 20110418 for 0000:01:00.0 on minor 0 [ 24.484100] intel_rapl: Found RAPL domain package [ 24.484113] intel_rapl: Found RAPL domain core [ 24.484123] intel_rapl: Found RAPL domain dram [ 24.522104] Adding 4094972k swap on /dev/sdb3. Priority:-1 extents:1 across:4094972k FS [ 25.325498] Adding 4094972k swap on /dev/sda3. Priority:-2 extents:1 across:4094972k FS [ 27.086856] xen:xen_evtchn: Event-channel device installed [ 27.167126] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 27.185491] xenbr0: port 1(eno2) entered blocking state [ 27.185856] xenbr0: port 1(eno2) entered disabled state [ 27.187222] device eno2 entered promiscuous mode [ 27.212828] igb 0000:03:00.0 eno2: igb: eno2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 27.217763] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready [ 28.217119] xenbr0: port 1(eno2) entered blocking state [ 28.217464] xenbr0: port 1(eno2) entered forwarding state [ 28.217932] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready [ 33.537305] xenbr0: port 2(vif1.0) entered blocking state [ 33.537320] xenbr0: port 2(vif1.0) entered disabled state [ 33.537428] device vif1.0 entered promiscuous mode [ 33.538786] IPv6: ADDRCONF(NETDEV_UP): vif1.0: link is not ready [ 33.567607] Bridge firewalling registered [ 34.224748] xen-blkback: backend/vbd/1/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 34.228555] xen-blkback: backend/vbd/1/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 34.308481] vif vif-1-0 vif1.0: Guest Rx ready [ 34.308598] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready [ 34.308626] xenbr0: port 2(vif1.0) entered blocking state [ 34.308637] xenbr0: port 2(vif1.0) entered forwarding state [ 41.403575] xenbr0: port 3(vif2.0) entered blocking state [ 41.403588] xenbr0: port 3(vif2.0) entered disabled state [ 41.403676] device vif2.0 entered promiscuous mode [ 41.491212] IPv6: ADDRCONF(NETDEV_UP): vif2.0: link is not ready [ 42.648483] xen-blkback: backend/vbd/2/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 42.653378] xen-blkback: backend/vbd/2/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 42.815705] vif vif-2-0 vif2.0: Guest Rx ready [ 42.815830] IPv6: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready [ 42.815860] xenbr0: port 3(vif2.0) entered blocking state [ 42.815870] xenbr0: port 3(vif2.0) entered forwarding state [ 49.038271] xenbr0: port 4(vif3.0) entered blocking state [ 49.038287] xenbr0: port 4(vif3.0) entered disabled state [ 49.038393] device vif3.0 entered promiscuous mode [ 49.039650] IPv6: ADDRCONF(NETDEV_UP): vif3.0: link is not ready [ 49.791640] xen-blkback: backend/vbd/3/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 49.796290] xen-blkback: backend/vbd/3/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 50.326686] vif vif-3-0 vif3.0: Guest Rx ready [ 50.326843] IPv6: ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready [ 50.326871] xenbr0: port 4(vif3.0) entered blocking state [ 50.326882] xenbr0: port 4(vif3.0) entered forwarding state [ 57.572001] xenbr0: port 5(vif4.0) entered blocking state [ 57.572016] xenbr0: port 5(vif4.0) entered disabled state [ 57.572264] device vif4.0 entered promiscuous mode [ 57.573836] IPv6: ADDRCONF(NETDEV_UP): vif4.0: link is not ready [ 58.548118] xen-blkback: backend/vbd/4/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 58.609044] xen-blkback: backend/vbd/4/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 59.463178] vif vif-4-0 vif4.0: Guest Rx ready [ 59.463654] IPv6: ADDRCONF(NETDEV_CHANGE): vif4.0: link becomes ready [ 59.464027] xenbr0: port 5(vif4.0) entered blocking state [ 59.464374] xenbr0: port 5(vif4.0) entered forwarding state [ 64.568851] xenbr0: port 6(vif5.0) entered blocking state [ 64.569239] xenbr0: port 6(vif5.0) entered disabled state [ 64.569722] device vif5.0 entered promiscuous mode [ 64.571501] IPv6: ADDRCONF(NETDEV_UP): vif5.0: link is not ready [ 65.637767] xen-blkback: backend/vbd/5/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 65.656995] xen-blkback: backend/vbd/5/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 65.871871] vif vif-5-0 vif5.0: Guest Rx ready [ 65.872361] IPv6: ADDRCONF(NETDEV_CHANGE): vif5.0: link becomes ready [ 65.872752] xenbr0: port 6(vif5.0) entered blocking state [ 65.873116] xenbr0: port 6(vif5.0) entered forwarding state [ 73.236275] xenbr0: port 7(vif6.0) entered blocking state [ 73.236684] xenbr0: port 7(vif6.0) entered disabled state [ 73.237215] device vif6.0 entered promiscuous mode [ 73.238874] IPv6: ADDRCONF(NETDEV_UP): vif6.0: link is not ready [ 74.421130] xen-blkback: backend/vbd/6/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 74.510888] xen-blkback: backend/vbd/6/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 74.928840] vif vif-6-0 vif6.0: Guest Rx ready [ 75.093034] IPv6: ADDRCONF(NETDEV_CHANGE): vif6.0: link becomes ready [ 75.093422] xenbr0: port 7(vif6.0) entered blocking state [ 75.096578] xenbr0: port 7(vif6.0) entered forwarding state [ 79.865032] xenbr0: port 8(vif7.0) entered blocking state [ 79.865414] xenbr0: port 8(vif7.0) entered disabled state [ 79.865921] device vif7.0 entered promiscuous mode [ 79.868205] IPv6: ADDRCONF(NETDEV_UP): vif7.0: link is not ready [ 81.194432] xen-blkback: backend/vbd/7/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 81.201982] xen-blkback: backend/vbd/7/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 81.384701] vif vif-7-0 vif7.0: Guest Rx ready [ 81.385188] IPv6: ADDRCONF(NETDEV_CHANGE): vif7.0: link becomes ready [ 81.385582] xenbr0: port 8(vif7.0) entered blocking state [ 81.385949] xenbr0: port 8(vif7.0) entered forwarding state [ 96.973239] xenbr0: port 9(vif8.0) entered blocking state [ 96.973607] xenbr0: port 9(vif8.0) entered disabled state [ 96.974057] device vif8.0 entered promiscuous mode [ 96.975688] IPv6: ADDRCONF(NETDEV_UP): vif8.0: link is not ready [ 99.509383] xen-blkback: backend/vbd/8/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 99.577978] xen-blkback: backend/vbd/8/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 105.045686] vif vif-8-0 vif8.0: Guest Rx ready [ 105.046199] IPv6: ADDRCONF(NETDEV_CHANGE): vif8.0: link becomes ready [ 105.046603] xenbr0: port 9(vif8.0) entered blocking state [ 105.047023] xenbr0: port 9(vif8.0) entered forwarding state [ 114.699280] xenbr0: port 10(vif9.0) entered blocking state [ 114.699652] xenbr0: port 10(vif9.0) entered disabled state [ 114.700122] device vif9.0 entered promiscuous mode [ 114.702036] IPv6: ADDRCONF(NETDEV_UP): vif9.0: link is not ready [ 115.411529] xen-blkback: backend/vbd/9/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 115.483510] xen-blkback: backend/vbd/9/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 115.890867] vif vif-9-0 vif9.0: Guest Rx ready [ 115.895487] IPv6: ADDRCONF(NETDEV_CHANGE): vif9.0: link becomes ready [ 115.895875] xenbr0: port 10(vif9.0) entered blocking state [ 115.902242] xenbr0: port 10(vif9.0) entered forwarding state [ 125.515538] xenbr0: port 11(vif10.0) entered blocking state [ 125.515911] xenbr0: port 11(vif10.0) entered disabled state [ 125.516392] device vif10.0 entered promiscuous mode [ 125.520525] IPv6: ADDRCONF(NETDEV_UP): vif10.0: link is not ready [ 127.007594] xen-blkback: backend/vbd/10/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 127.611709] xen-blkback: backend/vbd/10/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 132.580164] vif vif-10-0 vif10.0: Guest Rx ready [ 132.580712] IPv6: ADDRCONF(NETDEV_CHANGE): vif10.0: link becomes ready [ 132.581121] xenbr0: port 11(vif10.0) entered blocking state [ 132.581509] xenbr0: port 11(vif10.0) entered forwarding state [ 135.645365] xenbr0: port 12(vif11.0) entered blocking state [ 135.645810] xenbr0: port 12(vif11.0) entered disabled state [ 135.646286] device vif11.0 entered promiscuous mode [ 135.647999] IPv6: ADDRCONF(NETDEV_UP): vif11.0: link is not ready [ 136.330402] xen-blkback: backend/vbd/11/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 136.400596] xen-blkback: backend/vbd/11/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 136.914735] vif vif-11-0 vif11.0: Guest Rx ready [ 136.915241] IPv6: ADDRCONF(NETDEV_CHANGE): vif11.0: link becomes ready [ 136.915630] xenbr0: port 12(vif11.0) entered blocking state [ 136.916003] xenbr0: port 12(vif11.0) entered forwarding state [ 154.602541] xenbr0: port 13(vif12.0) entered blocking state [ 154.602933] xenbr0: port 13(vif12.0) entered disabled state [ 154.609637] device vif12.0 entered promiscuous mode [ 154.633296] IPv6: ADDRCONF(NETDEV_UP): vif12.0: link is not ready [ 157.119674] xen-blkback: backend/vbd/12/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 157.178457] xen-blkback: backend/vbd/12/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 160.380829] vif vif-12-0 vif12.0: Guest Rx ready [ 160.381334] IPv6: ADDRCONF(NETDEV_CHANGE): vif12.0: link becomes ready [ 160.381728] xenbr0: port 13(vif12.0) entered blocking state [ 160.382101] xenbr0: port 13(vif12.0) entered forwarding state [ 298.910121] xenbr0: port 2(vif1.0) entered disabled state [ 298.929983] xenbr0: port 2(vif1.0) entered disabled state [ 298.930393] device vif1.0 left promiscuous mode [ 298.930756] xenbr0: port 2(vif1.0) entered disabled state [ 302.735254] xenbr0: port 3(vif2.0) entered disabled state [ 303.208312] xenbr0: port 3(vif2.0) entered disabled state [ 303.209100] device vif2.0 left promiscuous mode [ 303.210825] xenbr0: port 3(vif2.0) entered disabled state [ 305.976555] xenbr0: port 5(vif4.0) entered disabled state [ 306.894474] xenbr0: port 5(vif4.0) entered disabled state [ 306.894858] device vif4.0 left promiscuous mode [ 306.895226] xenbr0: port 5(vif4.0) entered disabled state [ 307.068003] xenbr0: port 4(vif3.0) entered disabled state [ 308.606199] xenbr0: port 4(vif3.0) entered disabled state [ 308.606604] device vif3.0 left promiscuous mode [ 308.606970] xenbr0: port 4(vif3.0) entered disabled state [ 313.198775] xenbr0: port 12(vif11.0) entered disabled state [ 314.219550] xenbr0: port 8(vif7.0) entered disabled state [ 314.219903] xenbr0: port 9(vif8.0) entered disabled state [ 314.220234] xenbr0: port 10(vif9.0) entered disabled state [ 315.230591] xenbr0: port 13(vif12.0) entered disabled state [ 315.230936] xenbr0: port 7(vif6.0) entered disabled state [ 315.646899] xenbr0: port 12(vif11.0) entered disabled state [ 315.647638] device vif11.0 left promiscuous mode [ 315.647945] xenbr0: port 12(vif11.0) entered disabled state [ 315.879514] xenbr0: port 13(vif12.0) entered disabled state [ 315.879849] device vif12.0 left promiscuous mode [ 315.880149] xenbr0: port 13(vif12.0) entered disabled state [ 316.261866] xenbr0: port 9(vif8.0) entered disabled state [ 316.262216] device vif8.0 left promiscuous mode [ 316.262535] xenbr0: port 9(vif8.0) entered disabled state [ 316.456454] xenbr0: port 7(vif6.0) entered disabled state [ 316.456786] device vif6.0 left promiscuous mode [ 316.457129] xenbr0: port 7(vif6.0) entered disabled state [ 316.608783] xenbr0: port 11(vif10.0) entered disabled state [ 317.344330] xenbr0: port 6(vif5.0) entered disabled state [ 317.345286] device vif5.0 left promiscuous mode [ 317.345578] xenbr0: port 6(vif5.0) entered disabled state [ 317.441349] xenbr0: port 8(vif7.0) entered disabled state [ 317.441683] device vif7.0 left promiscuous mode [ 317.441974] xenbr0: port 8(vif7.0) entered disabled state [ 317.644587] xenbr0: port 10(vif9.0) entered disabled state [ 317.644912] device vif9.0 left promiscuous mode [ 317.645200] xenbr0: port 10(vif9.0) entered disabled state [ 318.096278] xenbr0: port 11(vif10.0) entered disabled state [ 318.096596] device vif10.0 left promiscuous mode [ 318.096917] xenbr0: port 11(vif10.0) entered disabled state