Re: [Xen-devel] [PATCH V2] Xen/pciback: Implement PCI slot or bus reset with 'do_flr' SysFS attribute

["Jan Beulich" <JBeulich@xxxxxxxx>]

>>> On 30.11.17 at 15:15, <govinda.tatti@xxxxxxxxxx> wrote:
> On 11/30/2017 2:27 AM, Jan Beulich wrote:
>>>>> On 29.11.17 at 18:38, <govinda.tatti@xxxxxxxxxx> wrote:
>>>>> In the case of bus or slot reset, our goal is to reset connected PCIe
>>>>> fabric/card/endpoint.
>>>>> The connected card/endpoint can be multi-function device. So, same
>>>>> walk-through and checking
>>>>> is needed irrespective of type of reset being used.
>>>> I don't follow: The scope of other devices/functions possibly
>>>> affected by a reset depends on the type of reset, doesn't it?
>>> For PCIe platforms, both slot and bus reset endup resetting all connected
>>> device/functions on thesecondary bus (behind the root-port or
>>> downstream-port).
>> According to my understanding this contradicts the comment
>> ahead of pci_reset_slot(), which talks of multiple slots per bus.
>> In such a setup, I can't see why resetting on slot would affect
>> other slots on the same bus. At the same time the comment
>> says that the slot reset may resolve to a bus one when there's
>> just a single slot on the bus.
> For legacy PCI/PCI-X, we can have multiple slots per bus but not with 
> PCI-Express
> (each link will be on a separate bus).

Is that true even for root complex integrated end points? A
random system's lspci output doesn't seem to agree with what
you say. A typical example would be USB controllers all sitting
on bus 0, but having different slot numbers. You clearly won't
be able to ever bus-reset these, and if you checked all devices
on bus 0 you would then also not be able to slot-reset them.

Jan


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel