[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v2 01/15] docs: create Memory Bandwidth Allocation (MBA) feature document



This patch creates MBA feature document in doc/features/. It describes
key points to implement MBA which is described in details in Intel SDM
"Introduction to Memory Bandwidth Allocation".

Signed-off-by: Yi Sun <yi.y.sun@xxxxxxxxxxxxxxx>
---
v2:
    - declare 'HW' in Terminology.
      (suggested by Chao Peng)
    - replace 'COS ID of VCPU' to 'COS ID of domain'.
      (suggested by Chao Peng)
    - replace 'COS register' to 'Thrtl MSR'.
      (suggested by Chao Peng)
    - add description for 'psr-mba-show' to state that the decimal value is
      shown for linear mode but hexadecimal value is shown for non-linear mode.
      (suggested by Chao Peng)
    - remove content in 'Areas for improvement'.
      (suggested by Chao Peng)
    - use '<>' to specify mandatory argument to a command.
      (suggested by Wei Liu)
v1:
    - remove a special character to avoid the error when building pandoc.
---
 docs/features/intel_psr_mba.pandoc | 256 +++++++++++++++++++++++++++++++++++++
 1 file changed, 256 insertions(+)
 create mode 100644 docs/features/intel_psr_mba.pandoc

diff --git a/docs/features/intel_psr_mba.pandoc 
b/docs/features/intel_psr_mba.pandoc
new file mode 100644
index 0000000..21592e8
--- /dev/null
+++ b/docs/features/intel_psr_mba.pandoc
@@ -0,0 +1,256 @@
+% Intel Memory Bandwidth Allocation (MBA) Feature
+% Revision 1.4
+
+\clearpage
+
+# Basics
+
+---------------- ----------------------------------------------------
+         Status: **Tech Preview**
+
+Architecture(s): Intel x86
+
+   Component(s): Hypervisor, toolstack
+
+       Hardware: MBA is supported on Skylake Server and beyond
+---------------- ----------------------------------------------------
+
+# Terminology
+
+* CAT         Cache Allocation Technology
+* CBM         Capacity BitMasks
+* CDP         Code and Data Prioritization
+* COS/CLOS    Class of Service
+* HW          Hardware
+* MBA         Memory Bandwidth Allocation
+* MSRs        Machine Specific Registers
+* PSR         Intel Platform Shared Resource
+* THRTL       Throttle value or delay value
+
+# Overview
+
+The Memory Bandwidth Allocation (MBA) feature provides indirect and approximate
+control over memory bandwidth available per-core. This feature provides OS/
+hypervisor the ability to slow misbehaving apps/domains or create advanced
+closed-loop control system via exposing control over a credit-based throttling
+mechanism.
+
+# User details
+
+* Feature Enabling:
+
+  Add "psr=mba" to boot line parameter to enable MBA feature.
+
+* xl interfaces:
+
+  1. `psr-mba-show [domain-id]`:
+
+     Show memory bandwidth throttling for domain. For linear mode, it shows the
+     decimal value. For non-linear mode, it shows hexadecimal value.
+
+  2. `psr-mba-set [OPTIONS] <domain-id> <throttling>`:
+
+     Set memory bandwidth throttling for domain.
+
+     Options:
+     '-s': Specify the socket to process, otherwise all sockets are processed.
+
+     Throttling value set in register implies memory bandwidth blocked, i.e.
+     higher throttling value results in lower bandwidth. The max throttling
+     value can be got through CPUID.
+
+     The response of the throttling value could be linear mode or non-linear
+     mode.
+
+     Linear mode: the input precision is defined as 100-(MBA_MAX). For 
instance,
+     if the MBA_MAX value is 90, the input precision is 10%. Values not an even
+     multiple of the precision (e.g., 12%) will be rounded down (e.g., to 10%
+     delay applied) by HW automatically.
+
+     Non-linear mode: input delay values are powers-of-two from zero to the
+     MBA_MAX value from CPUID. In this case any values not a power of two will
+     be rounded down the next nearest power of two by HW automatically.
+
+# Technical details
+
+MBA is a member of Intel PSR features, it shares the base PSR infrastructure
+in Xen.
+
+## Hardware perspective
+
+  MBA defines a range of MSRs to support specifying a delay value (Thrtl) per
+  COS, with details below.
+
+  ```
+   +----------------------------+----------------+
+   | MSR (per socket)           |    Address     |
+   +----------------------------+----------------+
+   | IA32_L2_QOS_Ext_BW_Thrtl_0 |     0xD50      |
+   +----------------------------+----------------+
+   | ...                        |  ...           |
+   +----------------------------+----------------+
+   | IA32_L2_QOS_Ext_BW_Thrtl_n | 0xD50+n (n<64) |
+   +----------------------------+----------------+
+  ```
+
+  When context switch happens, the COS ID of domain is written to per-thread 
MSR
+  `IA32_PQR_ASSOC`, and then hardware enforces bandwidth allocation according
+  to the throttling value stored in the Thrtl MSR register.
+
+## The relationship between MBA and CAT/CDP
+
+  Generally speaking, MBA is completely independent of CAT/CDP, and any
+  combination may be applied at any time, e.g. enabling MBA with CAT
+  disabled.
+
+  But it needs to be noticed that MBA shares COS infrastructure with CAT,
+  although MBA is enumerated by different CPUID leaf from CAT (which
+  indicates that the max COS of MBA may be different from CAT). In some
+  cases, a domain is permitted to have a COS that is beyond one (or more)
+  of PSR features but within the others. For instance, let's assume the max
+  COS of MBA is 8 but the max COS of L3 CAT is 16, when a domain is assigned
+  9 as COS, the L3 CAT CBM associated to COS 9 would be enforced, but for MBA,
+  the HW works as default value is set since COS 9 is beyond the max COS (8)
+  of MBA.
+
+## Design Overview
+
+* Core COS/Thrtl association
+
+  When enforcing Memory Bandwidth Allocation, all cores of domains have
+  the same default Thrtl MSR (COS0) which stores the same Thrtl (0). The
+  default Thrtl MSR is used only in hypervisor and is transparent to tool stack
+  and user.
+
+  System administrator can change PSR allocation policy at runtime by
+  tool stack. Since MBA shares COS ID with CAT/CDP, a COS ID corresponds to a
+  2-tuple, like [CBM, Thrtl] with only-CAT enalbed, when CDP is enabled,
+  the COS ID corresponds to a 3-tuple, like [Code_CBM, Data_CBM, Thrtl]. If
+  neither CAT nor CDP is enabled, things would be easier, one COS ID 
corresponds
+  to one Thrtl.
+
+* VCPU schedule
+
+  This part reuses CAT COS infrastructure.
+
+* Multi-sockets
+
+  Different sockets may have different MBA ability (like max COS)
+  although it is consistent on the same socket. So the capability
+  of per-socket MBA is specified.
+
+  This part reuses CAT COS infrastructure.
+
+## Implementation Description
+
+* Hypervisor interfaces:
+
+  1. Boot line param: "psr=mba" to enable the feature.
+
+  2. SYSCTL:
+          - XEN_SYSCTL_PSR_MBA_get_info: Get system MBA information.
+
+  3. DOMCTL:
+          - XEN_DOMCTL_PSR_MBA_OP_GET_THRTL: Get throttling for a domain.
+          - XEN_DOMCTL_PSR_MBA_OP_SET_THRTL: Set throttling for a domain.
+
+* xl interfaces:
+
+  1. psr-mba-show [domain-id]
+          Show system/domain runtime MBA throttling value. For linear mode,
+          it shows the decimal value. For non-linear mode, it shows hexadecimal
+          value.
+          => XEN_SYSCTL_PSR_MBA_get_info/XEN_DOMCTL_PSR_MBA_OP_GET_THRTL
+
+  2. psr-mba-set [OPTIONS] <domain-id> <throttling>
+          Set bandwidth throttling for a domain.
+          => XEN_DOMCTL_PSR_MBA_OP_SET_THRTL
+
+  3. psr-hwinfo
+          Show PSR HW information, including L3 CAT/CDP/L2 CAT/MBA.
+          => XEN_SYSCTL_PSR_MBA_get_info
+
+* Key data structure:
+
+  1. Feature HW info
+
+     ```
+     struct {
+         unsigned int thrtl_max;
+         unsigned int linear;
+     } mba_info;
+
+     - Member `thrtl_max`
+
+       `thrtl_max` is the max throttling value to be set.
+
+     - Member `linear`
+
+       `linear` means the response of delay value is linear or not.
+
+     As mentioned above, MBA is a member of Intel PSR features, it would
+     share the base PSR infrastructure in Xen. For example, the 'cos_max'
+     is a common HW property for all features. So, for other data structure
+     details, please refer 'intel_psr_cat_cdp.pandoc'.
+
+# Limitations
+
+MBA can only work on HW which enables it (check by CPUID).
+
+# Testing
+
+We can execute these commands to verify MBA on different HWs supporting them.
+
+For example:
+    root@:~$ xl psr-hwinfo --mba
+    Memory Bandwidth Allocation (MBA):
+    Socket ID       : 0
+    Linear Mode     : Enabled
+    Maximum COS     : 7
+    Maximum Throttling Value: 90
+    Default Throttling Value: 0
+
+    root@:~$ xl psr-mba-set 1 0xa
+
+    root@:~$ xl psr-mba-show 1
+    Socket ID       : 0
+    Default THRTL   : 0
+       ID                     NAME            THRTL
+        1                 ubuntu14             0xa
+
+# Areas for improvement
+
+N/A
+
+# Known issues
+
+N/A
+
+# References
+
+"INTEL RESOURCE DIRECTOR TECHNOLOGY (INTEL RDT) ALLOCATION FEATURES" [Intel 64 
and IA-32 Architectures Software Developer Manuals, 
vol3](http://www.intel.com/content/www/us/en/processors/architectures-software-developer-manuals.html)
+
+# History
+
+------------------------------------------------------------------------
+Date       Revision Version  Notes
+---------- -------- -------- -------------------------------------------
+2017-01-10 1.0      Xen 4.9  Design document written
+2017-07-10 1.1      Xen 4.10 Changes:
+                             1. Modify data structure according to latest
+                                codes;
+                             2. Add content for 'Areas for improvement';
+                             3. Other minor changes.
+2017-08-09 1.2      Xen 4.10 Changes:
+                             1. Remove a special character to avoid error when
+                                building pandoc.
+2017-08-15 1.3      Xen 4.10 Changes:
+                             1. Add terminology 'HW'.
+                             2. Change 'COS ID of VCPU' to 'COS ID of domain'.
+                             3. Change 'COS register' to 'Thrtl MSR'.
+                             4. Explain the value shown for 'psr-mba-show' 
under
+                                different modes.
+                             5. Remove content in 'Areas for improvement'.
+2017-08-16 1.4      Xen 4.10 Changes:
+                             1. Add '<>' for mandatory argument.
+---------- -------- -------- -------------------------------------------
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.