[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Xen-devel] Regarding changing memory for DOM0
On 03/08/17 14:46, Andrii Anisov wrote:
On 03.08.17 16:38, Andrii Anisov wrote:
If I recall correctly related issue was fixed in 4.9.
It's ugly.
I've reproduced the setup on my table, with the current master. It does
not work.
XEN allocated Dom0 memory properly:
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Loading kernel from boot module @ 000000007a000000
(XEN) Allocating 1:1 mappings totalling 2048MB for dom0:
(XEN) BANK[0] 0x00000050000000-0x00000078000000 (640MB)
(XEN) BANK[1] 0x00000600000000-0x00000640000000 (1024MB)
(XEN) BANK[2] 0x00000718000000-0x00000730000000 (384MB)
(XEN) Grant table range: 0x0000073fe00000-0x0000073fe64000
(XEN) Loading zImage from 000000007a000000 to
0000000050080000-0000000052080000
(XEN) Allocating PPI 16 for event channel interrupt
(XEN) Loading dom0 DTB to 0x0000000058000000-0x000000005800fd09
(XEN) Scrubbing Free RAM on 1 nodes using 4 CPUs
(XEN) ........done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
But my nfs-root is not mounted :(
Looking at the log, there is 640MB of RAM allocated below 4GB. So is it
the same issue?
Also, which version of Xen are you comparing with?
Cheers,
--
Julien Grall
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel
|
