[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v4 16/18] xen/pvcalls: implement read



On Wed, 21 Jun 2017, Boris Ostrovsky wrote:
> On 06/15/2017 03:09 PM, Stefano Stabellini wrote:
> > When an active socket has data available, increment the io and read
> > counters, and schedule the ioworker.
> >
> > Implement the read function by reading from the socket, writing the data
> > to the data ring.
> >
> > Set in_error on error.
> >
> > Signed-off-by: Stefano Stabellini <stefano@xxxxxxxxxxx>
> > CC: boris.ostrovsky@xxxxxxxxxx
> > CC: jgross@xxxxxxxx
> > ---
> >  drivers/xen/pvcalls-back.c | 85 
> > ++++++++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 85 insertions(+)
> >
> > diff --git a/drivers/xen/pvcalls-back.c b/drivers/xen/pvcalls-back.c
> > index b9a10b9..65d9eba 100644
> > --- a/drivers/xen/pvcalls-back.c
> > +++ b/drivers/xen/pvcalls-back.c
> > @@ -100,6 +100,81 @@ static int pvcalls_back_release_active(struct 
> > xenbus_device *dev,
> >  
> >  static void pvcalls_conn_back_read(void *opaque)
> >  {
> > +   struct sock_mapping *map = (struct sock_mapping *)opaque;
> > +   struct msghdr msg;
> > +   struct kvec vec[2];
> > +   RING_IDX cons, prod, size, wanted, array_size, masked_prod, masked_cons;
> > +   int32_t error;
> > +   struct pvcalls_data_intf *intf = map->ring;
> > +   struct pvcalls_data *data = &map->data;
> > +   unsigned long flags;
> > +   int ret;
> > +
> > +   array_size = XEN_FLEX_RING_SIZE(map->ring_order);
> 
> I noticed that in the next patch you call this 'ring_size. Can you make
> those things consistent? (There may be more than just this variable and,
> in fact, perhaps some things can be factored out? There are code
> fragments that look similar)

Yes, I'll make them more consistent. I don't think we can actually share
code between the two functions are they do different things.


> > +   cons = intf->in_cons;
> > +   prod = intf->in_prod;
> > +   error = intf->in_error;
> > +   /* read the indexes first, then deal with the data */
> > +   virt_mb();
> > +
> > +   if (error)
> > +           return;
> > +
> > +   size = pvcalls_queued(prod, cons, array_size);
> > +   if (size >= array_size)
> > +           return;
> > +   spin_lock_irqsave(&map->sock->sk->sk_receive_queue.lock, flags);
> > +   if (skb_queue_empty(&map->sock->sk->sk_receive_queue)) {
> > +           atomic_set(&map->read, 0);
> > +           spin_unlock_irqrestore(&map->sock->sk->sk_receive_queue.lock,
> > +                           flags);
> > +           return;
> > +   }
> > +   spin_unlock_irqrestore(&map->sock->sk->sk_receive_queue.lock, flags);
> > +   wanted = array_size - size;
> > +   masked_prod = pvcalls_mask(prod, array_size);
> > +   masked_cons = pvcalls_mask(cons, array_size);
> > +
> > +   memset(&msg, 0, sizeof(msg));
> > +   msg.msg_iter.type = ITER_KVEC|WRITE;
> > +   msg.msg_iter.count = wanted;
> > +   if (masked_prod < masked_cons) {
> > +           vec[0].iov_base = data->in + masked_prod;
> > +           vec[0].iov_len = wanted;
> > +           msg.msg_iter.kvec = vec;
> > +           msg.msg_iter.nr_segs = 1;
> > +   } else {
> > +           vec[0].iov_base = data->in + masked_prod;
> > +           vec[0].iov_len = array_size - masked_prod;
> > +           vec[1].iov_base = data->in;
> > +           vec[1].iov_len = wanted - vec[0].iov_len;
> > +           msg.msg_iter.kvec = vec;
> > +           msg.msg_iter.nr_segs = 2;
> > +   }
> 
> 
> This is probably obvious to everyone but me but can you explain what is
> going on here? ;-)

We are setting up iovecs based on the "in" array (similarly the write
function does the same for the "out" array). Then we are passing the
iovecs to inet_recvmsg to do IO. Depending on the indexes on the array
we need one iovec entry or two, in case we need to wrap around the
circular buffer.

 
> > +
> > +   atomic_set(&map->read, 0);
> 
> Is this not atomic_dec() by any chance?

It is meant to be atomic_set: the idea is that we are going to drain all
the data. If there is any remaming data after inet_recvmsg, we'll
increase map->read again.


> > +   ret = inet_recvmsg(map->sock, &msg, wanted, MSG_DONTWAIT);
> > +   WARN_ON(ret > wanted);
> > +   if (ret == -EAGAIN) /* shouldn't happen */
> > +           return;
> > +   if (!ret)
> > +           ret = -ENOTCONN;
> > +   spin_lock_irqsave(&map->sock->sk->sk_receive_queue.lock, flags);
> > +   if (ret > 0 && !skb_queue_empty(&map->sock->sk->sk_receive_queue))
> > +           atomic_inc(&map->read);
> > +   spin_unlock_irqrestore(&map->sock->sk->sk_receive_queue.lock, flags);
> > +
> > +   /* write the data, then modify the indexes */
> > +   virt_wmb();
> > +   if (ret < 0)
> > +           intf->in_error = ret;
> > +   else
> > +           intf->in_prod = prod + ret;
> > +   /* update the indexes, then notify the other end */
> > +   virt_wmb();
> > +   notify_remote_via_irq(map->irq);
> > +
> > +   return;
> >  }
> >  
> >  static int pvcalls_conn_back_write(struct sock_mapping *map)
> > @@ -172,6 +247,16 @@ static void pvcalls_sk_state_change(struct sock *sock)
> >  
> >  static void pvcalls_sk_data_ready(struct sock *sock)
> >  {
> > +   struct sock_mapping *map = sock->sk_user_data;
> > +   struct pvcalls_ioworker *iow;
> > +
> > +   if (map == NULL)
> > +           return;
> > +
> > +   iow = &map->ioworker;
> > +   atomic_inc(&map->read);
> > +   atomic_inc(&map->io);
> > +   queue_work(iow->wq, &iow->register_work);
> >  }
> >  
> >  static struct sock_mapping *pvcalls_new_active_socket(
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.