|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH 2/2] xen/input: add multi-touch support
Hi Oleksandr,
On Thu, Apr 13, 2017 at 02:38:04PM +0300, Oleksandr Andrushchenko wrote:
> From: Oleksandr Andrushchenko <oleksandr_andrushchenko@xxxxxxxx>
>
> Extend xen_kbdfront to provide multi-touch support
> to unprivileged domains.
>
> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@xxxxxxxx>
> ---
> drivers/input/misc/xen-kbdfront.c | 142
> +++++++++++++++++++++++++++++++++++++-
> 1 file changed, 140 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/input/misc/xen-kbdfront.c
> b/drivers/input/misc/xen-kbdfront.c
> index 01c27b4c3288..e5d064aaa237 100644
> --- a/drivers/input/misc/xen-kbdfront.c
> +++ b/drivers/input/misc/xen-kbdfront.c
> @@ -17,6 +17,7 @@
> #include <linux/errno.h>
> #include <linux/module.h>
> #include <linux/input.h>
> +#include <linux/input/mt.h>
> #include <linux/slab.h>
>
> #include <asm/xen/hypervisor.h>
> @@ -34,11 +35,14 @@
> struct xenkbd_info {
> struct input_dev *kbd;
> struct input_dev *ptr;
> + struct input_dev *mtouch;
> struct xenkbd_page *page;
> int gref;
> int irq;
> struct xenbus_device *xbdev;
> char phys[32];
> + /* current MT slot/contact ID we are injecting events in */
> + int mtouch_cur_contact_id;
> };
>
> enum { KPARAM_X, KPARAM_Y, KPARAM_CNT };
> @@ -47,6 +51,12 @@ module_param_array(ptr_size, int, NULL, 0444);
> MODULE_PARM_DESC(ptr_size,
> "Pointing device width, height in pixels (default 800,600)");
>
> +enum { KPARAM_MT_X, KPARAM_MT_Y, KPARAM_MT_CNT };
> +static int mtouch_size[KPARAM_MT_CNT] = { XENFB_WIDTH, XENFB_HEIGHT };
> +module_param_array(mtouch_size, int, NULL, 0444);
> +MODULE_PARM_DESC(ptr_size,
> + "Multi-touch device width, height in pixels (default 800,600)");
> +
Why do you need separate module parameters for multi-touch device?
> static int xenkbd_remove(struct xenbus_device *);
> static int xenkbd_connect_backend(struct xenbus_device *, struct xenkbd_info
> *);
> static void xenkbd_disconnect_backend(struct xenkbd_info *);
> @@ -100,6 +110,60 @@ static irqreturn_t input_handler(int rq, void *dev_id)
> input_report_rel(dev, REL_WHEEL,
> -event->pos.rel_z);
> break;
> + case XENKBD_TYPE_MTOUCH:
> + dev = info->mtouch;
> + if (unlikely(!dev))
> + break;
> + if (unlikely(event->mtouch.contact_id !=
> + info->mtouch_cur_contact_id)) {
Why is this unlikely? Does contact ID changes once in 1000 packets or
even less?
> + info->mtouch_cur_contact_id =
> + event->mtouch.contact_id;
> + input_mt_slot(dev, event->mtouch.contact_id);
> + }
> + switch (event->mtouch.event_type) {
> + case XENKBD_MT_EV_DOWN:
> + input_mt_report_slot_state(dev, MT_TOOL_FINGER,
> + true);
> + input_event(dev, EV_ABS, ABS_MT_POSITION_X,
> + event->mtouch.u.pos.abs_x);
> + input_event(dev, EV_ABS, ABS_MT_POSITION_Y,
> + event->mtouch.u.pos.abs_y);
> + input_event(dev, EV_ABS, ABS_X,
> + event->mtouch.u.pos.abs_x);
> + input_event(dev, EV_ABS, ABS_Y,
> + event->mtouch.u.pos.abs_y);
> + break;
> + case XENKBD_MT_EV_UP:
> + input_mt_report_slot_state(dev, MT_TOOL_FINGER,
> + false);
> + break;
> + case XENKBD_MT_EV_MOTION:
> + input_event(dev, EV_ABS, ABS_MT_POSITION_X,
> + event->mtouch.u.pos.abs_x);
> + input_event(dev, EV_ABS, ABS_MT_POSITION_Y,
> + event->mtouch.u.pos.abs_y);
> + input_event(dev, EV_ABS, ABS_X,
> + event->mtouch.u.pos.abs_x);
> + input_event(dev, EV_ABS, ABS_Y,
> + event->mtouch.u.pos.abs_y);
> + break;
> + case XENKBD_MT_EV_SYN:
> + input_mt_sync_frame(dev);
> + break;
> + case XENKBD_MT_EV_SHAPE:
> + input_event(dev, EV_ABS, ABS_MT_TOUCH_MAJOR,
> + event->mtouch.u.shape.major);
> + input_event(dev, EV_ABS, ABS_MT_TOUCH_MINOR,
> + event->mtouch.u.shape.minor);
> + break;
> + case XENKBD_MT_EV_ORIENT:
> + input_event(dev, EV_ABS, ABS_MT_ORIENTATION,
> + event->mtouch.u.orientation);
> + break;
> + }
> + /* only report syn when requested */
> + if (event->mtouch.event_type != XENKBD_MT_EV_SYN)
> + dev = NULL;
> }
> if (dev)
> input_sync(dev);
> @@ -115,9 +179,9 @@ static int xenkbd_probe(struct xenbus_device *dev,
> const struct xenbus_device_id *id)
> {
> int ret, i;
> - unsigned int abs;
> + unsigned int abs, touch;
> struct xenkbd_info *info;
> - struct input_dev *kbd, *ptr;
> + struct input_dev *kbd, *ptr, *mtouch;
>
> info = kzalloc(sizeof(*info), GFP_KERNEL);
> if (!info) {
> @@ -152,6 +216,17 @@ static int xenkbd_probe(struct xenbus_device *dev,
> }
> }
>
> + touch = xenbus_read_unsigned(dev->nodename,
> + XENKBD_FIELD_FEAT_MTOUCH, 0);
> + if (touch) {
> + ret = xenbus_write(XBT_NIL, dev->nodename,
> + XENKBD_FIELD_REQ_MTOUCH, "1");
> + if (ret) {
> + pr_warning("xenkbd: can't request multi-touch");
> + touch = 0;
> + }
> + }
> +
> /* keyboard */
> kbd = input_allocate_device();
> if (!kbd)
> @@ -208,6 +283,67 @@ static int xenkbd_probe(struct xenbus_device *dev,
> }
> info->ptr = ptr;
>
> + /* multi-touch device */
> + if (touch) {
> + int num_cont, width, height;
> +
> + mtouch = input_allocate_device();
> + if (!mtouch)
> + goto error_nomem;
> +
> + num_cont = xenbus_read_unsigned(info->xbdev->nodename,
> + XENKBD_FIELD_MT_NUM_CONTACTS,
> + 1);
> + width = xenbus_read_unsigned(info->xbdev->nodename,
> + XENKBD_FIELD_MT_WIDTH,
> + XENFB_WIDTH);
> + height = xenbus_read_unsigned(info->xbdev->nodename,
> + XENKBD_FIELD_MT_HEIGHT,
> + XENFB_HEIGHT);
Curious why you need separate parameters here too...
> +
> + mtouch->name = "Xen Virtual Multi-touch";
> + mtouch->phys = info->phys;
> + mtouch->id.bustype = BUS_PCI;
> + mtouch->id.vendor = 0x5853;
> + mtouch->id.product = 0xfffd;
> +
> + __set_bit(EV_ABS, mtouch->evbit);
> + __set_bit(EV_KEY, mtouch->evbit);
> + __set_bit(BTN_TOUCH, mtouch->keybit);
> +
> + input_set_abs_params(mtouch, ABS_X,
> + 0, width, 0, 0);
> + input_set_abs_params(mtouch, ABS_Y,
> + 0, height, 0, 0);
> + input_set_abs_params(mtouch, ABS_PRESSURE,
> + 0, 255, 0, 0);
> +
> + input_set_abs_params(mtouch, ABS_MT_TOUCH_MAJOR,
> + 0, 255, 0, 0);
> + input_set_abs_params(mtouch, ABS_MT_POSITION_X,
> + 0, width, 0, 0);
> + input_set_abs_params(mtouch, ABS_MT_POSITION_Y,
> + 0, height, 0, 0);
> + input_set_abs_params(mtouch, ABS_MT_PRESSURE,
> + 0, 255, 0, 0);
> +
> + input_mt_init_slots(mtouch, num_cont, 0);
> +
> + mtouch_size[KPARAM_MT_X] = width;
> + mtouch_size[KPARAM_MT_Y] = height;
> + info->mtouch_cur_contact_id = -1;
> +
> + ret = input_register_device(mtouch);
> + if (ret) {
> + input_free_device(mtouch);
> + xenbus_dev_fatal(info->xbdev, ret,
> + "input_register_device(mtouch)");
> + goto error;
> + }
> + info->mtouch_cur_contact_id = -1;
> + info->mtouch = mtouch;
> + }
> +
> ret = xenkbd_connect_backend(dev, info);
> if (ret < 0)
> goto error;
> @@ -240,6 +376,8 @@ static int xenkbd_remove(struct xenbus_device *dev)
> input_unregister_device(info->kbd);
> if (info->ptr)
> input_unregister_device(info->ptr);
> + if (info->mtouch)
> + input_unregister_device(info->mtouch);
> free_page((unsigned long)info->page);
> kfree(info);
> return 0;
> --
> 2.7.4
>
Thanks.
--
Dmitry
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |