[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v6 12/36] ARM: GICv3: forward pending LPIs to guests



Upon receiving an LPI on the host, we need to find the right VCPU and
virtual IRQ number to get this IRQ injected.
Iterate our two-level LPI table to find this information quickly when
the host takes an LPI. Call the existing injection function to let the
GIC emulation deal with this interrupt.
Also we enhance struct pending_irq to cache the pending bit and the
priority information for LPIs. Reading the information from there is
faster than accessing the property table from guest memory. Also it
use some padding area, so does not require more memory.
This introduces a do_LPI() as a hardware gic_ops and a function to
retrieve the (cached) priority value of an LPI and a vgic_ops.

Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
---
 xen/arch/arm/gic-v2.c            |  7 +++++
 xen/arch/arm/gic-v3-lpi.c        | 56 ++++++++++++++++++++++++++++++++++++++++
 xen/arch/arm/gic-v3.c            |  1 +
 xen/arch/arm/gic.c               |  8 +++++-
 xen/arch/arm/vgic-v2.c           |  7 +++++
 xen/arch/arm/vgic-v3.c           | 12 +++++++++
 xen/arch/arm/vgic.c              |  7 ++++-
 xen/include/asm-arm/domain.h     |  3 ++-
 xen/include/asm-arm/gic.h        |  2 ++
 xen/include/asm-arm/gic_v3_its.h |  8 ++++++
 xen/include/asm-arm/vgic.h       |  8 ++++++
 11 files changed, 116 insertions(+), 3 deletions(-)

diff --git a/xen/arch/arm/gic-v2.c b/xen/arch/arm/gic-v2.c
index 270a136..ffbe47c 100644
--- a/xen/arch/arm/gic-v2.c
+++ b/xen/arch/arm/gic-v2.c
@@ -1217,6 +1217,12 @@ static int __init gicv2_init(void)
     return 0;
 }
 
+static void gicv2_do_LPI(unsigned int lpi)
+{
+    /* No LPIs in a GICv2 */
+    BUG();
+}
+
 const static struct gic_hw_operations gicv2_ops = {
     .info                = &gicv2_info,
     .init                = gicv2_init,
@@ -1244,6 +1250,7 @@ const static struct gic_hw_operations gicv2_ops = {
     .make_hwdom_madt     = gicv2_make_hwdom_madt,
     .map_hwdom_extra_mappings = gicv2_map_hwdown_extra_mappings,
     .iomem_deny_access   = gicv2_iomem_deny_access,
+    .do_LPI              = gicv2_do_LPI,
 };
 
 /* Set up the GIC */
diff --git a/xen/arch/arm/gic-v3-lpi.c b/xen/arch/arm/gic-v3-lpi.c
index 292f2d0..5f3fe2c 100644
--- a/xen/arch/arm/gic-v3-lpi.c
+++ b/xen/arch/arm/gic-v3-lpi.c
@@ -136,6 +136,62 @@ uint64_t gicv3_get_redist_address(unsigned int cpu, bool 
use_pta)
         return per_cpu(lpi_redist, cpu).redist_id << 16;
 }
 
+/*
+ * Handle incoming LPIs, which are a bit special, because they are potentially
+ * numerous and also only get injected into guests. Treat them specially here,
+ * by just looking up their target vCPU and virtual LPI number and hand it
+ * over to the injection function.
+ * Please note that LPIs are edge-triggered only, also have no active state,
+ * so spurious interrupts on the host side are no issue (we can just ignore
+ * them).
+ * Also a guest cannot expect that firing interrupts that haven't been
+ * fully configured yet will reach the CPU, so we don't need to care about
+ * this special case.
+ */
+void gicv3_do_LPI(unsigned int lpi)
+{
+    struct domain *d;
+    union host_lpi *hlpip, hlpi;
+    struct vcpu *vcpu;
+
+    /* EOI the LPI already. */
+    WRITE_SYSREG32(lpi, ICC_EOIR1_EL1);
+
+    /* Find out if a guest mapped something to this physical LPI. */
+    hlpip = gic_get_host_lpi(lpi);
+    if ( !hlpip )
+        return;
+
+    hlpi.data = read_u64_atomic(&hlpip->data);
+
+    /*
+     * Unmapped events are marked with an invalid LPI ID. We can safely
+     * ignore them, as they have no further state and no-one can expect
+     * to see them if they have not been mapped.
+     */
+    if ( hlpi.virt_lpi == INVALID_LPI )
+        return;
+
+    d = rcu_lock_domain_by_id(hlpi.dom_id);
+    if ( !d )
+        return;
+
+    /* Make sure we don't step beyond the vcpu array. */
+    if ( hlpi.vcpu_id >= d->max_vcpus )
+    {
+        rcu_unlock_domain(d);
+        return;
+    }
+
+    vcpu = d->vcpu[hlpi.vcpu_id];
+
+    /* Check if the VCPU is ready to receive LPIs. */
+    if ( vcpu->arch.vgic.flags & VGIC_V3_LPIS_ENABLED )
+        vgic_vcpu_inject_irq(vcpu, hlpi.virt_lpi);
+
+    rcu_unlock_domain(d);
+}
+
 static int gicv3_lpi_allocate_pendtable(uint64_t *reg)
 {
     uint64_t val;
diff --git a/xen/arch/arm/gic-v3.c b/xen/arch/arm/gic-v3.c
index a559e5e..63dbc21 100644
--- a/xen/arch/arm/gic-v3.c
+++ b/xen/arch/arm/gic-v3.c
@@ -1670,6 +1670,7 @@ static const struct gic_hw_operations gicv3_ops = {
     .make_hwdom_dt_node  = gicv3_make_hwdom_dt_node,
     .make_hwdom_madt     = gicv3_make_hwdom_madt,
     .iomem_deny_access   = gicv3_iomem_deny_access,
+    .do_LPI              = gicv3_do_LPI,
 };
 
 static int __init gicv3_dt_preinit(struct dt_device_node *node, const void 
*data)
diff --git a/xen/arch/arm/gic.c b/xen/arch/arm/gic.c
index 44c34b1..a6fb927 100644
--- a/xen/arch/arm/gic.c
+++ b/xen/arch/arm/gic.c
@@ -728,7 +728,13 @@ void gic_interrupt(struct cpu_user_regs *regs, int is_fiq)
             do_IRQ(regs, irq, is_fiq);
             local_irq_disable();
         }
-        else if (unlikely(irq < 16))
+        else if ( is_lpi(irq) )
+        {
+            local_irq_enable();
+            gic_hw_ops->do_LPI(irq);
+            local_irq_disable();
+        }
+        else if ( unlikely(irq < 16) )
         {
             do_sgi(regs, irq);
         }
diff --git a/xen/arch/arm/vgic-v2.c b/xen/arch/arm/vgic-v2.c
index 0587569..df91940 100644
--- a/xen/arch/arm/vgic-v2.c
+++ b/xen/arch/arm/vgic-v2.c
@@ -709,11 +709,18 @@ static struct pending_irq *vgic_v2_lpi_to_pending(struct 
domain *d,
     BUG();
 }
 
+static int vgic_v2_lpi_get_priority(struct domain *d, unsigned int vlpi)
+{
+    /* Dummy function, no LPIs on a VGICv2. */
+    BUG();
+}
+
 static const struct vgic_ops vgic_v2_ops = {
     .vcpu_init   = vgic_v2_vcpu_init,
     .domain_init = vgic_v2_domain_init,
     .domain_free = vgic_v2_domain_free,
     .lpi_to_pending = vgic_v2_lpi_to_pending,
+    .lpi_get_priority = vgic_v2_lpi_get_priority,
     .max_vcpus = 8,
 };
 
diff --git a/xen/arch/arm/vgic-v3.c b/xen/arch/arm/vgic-v3.c
index f25125e..6bc3d76 100644
--- a/xen/arch/arm/vgic-v3.c
+++ b/xen/arch/arm/vgic-v3.c
@@ -1553,12 +1553,24 @@ static struct pending_irq 
*vgic_v3_lpi_to_pending(struct domain *d,
     return pirq;
 }
 
+/* Retrieve the priority of an LPI from its struct pending_irq. */
+static int vgic_v3_lpi_get_priority(struct domain *d, uint32_t vlpi)
+{
+    struct pending_irq *p = vgic_v3_lpi_to_pending(d, vlpi);
+
+    if ( !p )
+        return GIC_PRI_IRQ;
+
+    return p->lpi_priority;
+}
+
 static const struct vgic_ops v3_ops = {
     .vcpu_init   = vgic_v3_vcpu_init,
     .domain_init = vgic_v3_domain_init,
     .domain_free = vgic_v3_domain_free,
     .emulate_reg  = vgic_v3_emulate_reg,
     .lpi_to_pending = vgic_v3_lpi_to_pending,
+    .lpi_get_priority = vgic_v3_lpi_get_priority,
     /*
      * We use both AFF1 and AFF0 in (v)MPIDR. Thus, the max number of CPU
      * that can be supported is up to 4096(==256*16) in theory.
diff --git a/xen/arch/arm/vgic.c b/xen/arch/arm/vgic.c
index a7a50bc..e6c97b2 100644
--- a/xen/arch/arm/vgic.c
+++ b/xen/arch/arm/vgic.c
@@ -226,10 +226,15 @@ struct vcpu *vgic_get_target_vcpu(struct vcpu *v, 
unsigned int virq)
 
 static int vgic_get_virq_priority(struct vcpu *v, unsigned int virq)
 {
-    struct vgic_irq_rank *rank = vgic_rank_irq(v, virq);
+    struct vgic_irq_rank *rank;
     unsigned long flags;
     int priority;
 
+    /* LPIs don't have a rank, also store their priority separately. */
+    if ( is_lpi(virq) )
+        return v->domain->arch.vgic.handler->lpi_get_priority(v->domain, virq);
+
+    rank = vgic_rank_irq(v, virq);
     vgic_lock_rank(v, rank, flags);
     priority = rank->priority[virq & INTERRUPT_RANK_MASK];
     vgic_unlock_rank(v, rank, flags);
diff --git a/xen/include/asm-arm/domain.h b/xen/include/asm-arm/domain.h
index 91dfe0a..583d491 100644
--- a/xen/include/asm-arm/domain.h
+++ b/xen/include/asm-arm/domain.h
@@ -259,7 +259,8 @@ struct arch_vcpu
 
         /* GICv3: redistributor base and flags for this vCPU */
         paddr_t rdist_base;
-#define VGIC_V3_RDIST_LAST  (1 << 0)        /* last vCPU of the rdist */
+#define VGIC_V3_RDIST_LAST      (1 << 0)        /* last vCPU of the rdist */
+#define VGIC_V3_LPIS_ENABLED    (1 << 1)
         uint8_t flags;
     } vgic;
 
diff --git a/xen/include/asm-arm/gic.h b/xen/include/asm-arm/gic.h
index 836a103..42963c0 100644
--- a/xen/include/asm-arm/gic.h
+++ b/xen/include/asm-arm/gic.h
@@ -366,6 +366,8 @@ struct gic_hw_operations {
     int (*map_hwdom_extra_mappings)(struct domain *d);
     /* Deny access to GIC regions */
     int (*iomem_deny_access)(const struct domain *d);
+    /* Handle LPIs, which require special handling */
+    void (*do_LPI)(unsigned int lpi);
 };
 
 void register_gic_ops(const struct gic_hw_operations *ops);
diff --git a/xen/include/asm-arm/gic_v3_its.h b/xen/include/asm-arm/gic_v3_its.h
index 29559a3..7470779 100644
--- a/xen/include/asm-arm/gic_v3_its.h
+++ b/xen/include/asm-arm/gic_v3_its.h
@@ -134,6 +134,8 @@ void gicv3_its_dt_init(const struct dt_device_node *node);
 
 bool gicv3_its_host_has_its(void);
 
+void gicv3_do_LPI(unsigned int lpi);
+
 int gicv3_lpi_init_rdist(void __iomem * rdist_base);
 
 /* Initialize the host structures for LPIs and the host ITSes. */
@@ -175,6 +177,12 @@ static inline bool gicv3_its_host_has_its(void)
     return false;
 }
 
+static inline void gicv3_do_LPI(unsigned int lpi)
+{
+    /* We don't enable LPIs without an ITS. */
+    BUG();
+}
+
 static inline int gicv3_lpi_init_rdist(void __iomem * rdist_base)
 {
     return -ENODEV;
diff --git a/xen/include/asm-arm/vgic.h b/xen/include/asm-arm/vgic.h
index 04972d3..52856ca 100644
--- a/xen/include/asm-arm/vgic.h
+++ b/xen/include/asm-arm/vgic.h
@@ -60,18 +60,25 @@ struct pending_irq
      * vcpu while it is still inflight and on an GICH_LR register on the
      * old vcpu.
      *
+     * GIC_IRQ_GUEST_LPI_PENDING: this caches the pending bit of an LPI.
+     * On hardware the LPI pending bit is stored in a table in system
+     * memory, which would require us to access guest memory every time
+     * we want to learn the state. So we cache the state here.
+     *
      */
 #define GIC_IRQ_GUEST_QUEUED   0
 #define GIC_IRQ_GUEST_ACTIVE   1
 #define GIC_IRQ_GUEST_VISIBLE  2
 #define GIC_IRQ_GUEST_ENABLED  3
 #define GIC_IRQ_GUEST_MIGRATING   4
+#define GIC_IRQ_GUEST_LPI_PENDING 5
     unsigned long status;
     struct irq_desc *desc; /* only set it the irq corresponds to a physical 
irq */
     unsigned int irq;
 #define GIC_INVALID_LR         (uint8_t)~0
     uint8_t lr;
     uint8_t priority;
+    uint8_t lpi_priority;       /* Caches the priority if this is an LPI. */
     /* inflight is used to append instances of pending_irq to
      * vgic.inflight_irqs */
     struct list_head inflight;
@@ -136,6 +143,7 @@ struct vgic_ops {
     bool (*emulate_reg)(struct cpu_user_regs *regs, union hsr hsr);
     /* lookup the struct pending_irq for a given LPI interrupt */
     struct pending_irq *(*lpi_to_pending)(struct domain *d, unsigned int vlpi);
+    int (*lpi_get_priority)(struct domain *d, uint32_t vlpi);
     /* Maximum number of vCPU supported */
     const unsigned int max_vcpus;
 };
-- 
2.9.0


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.