[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v16] xen/sndif: Add sound-device ABI



From: Oleksandr Andrushchenko <oleksandr_andrushchenko@xxxxxxxx>

This is the ABI for the two halves of a para-virtualized
sound driver to communicate with each other.

The ABI allows implementing audio playback and capture as
well as volume control and possibility to mute/unmute
audio sources.

Note: depending on the use-case backend can expose more sound
cards and PCM devices/streams than the underlying HW physically
has by employing SW mixers, configuring virtual sound streams,
channels etc. Thus, allowing fine tunned configurations per
frontend.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@xxxxxxxx>
Signed-off-by: Oleksandr Grytsov <oleksandr_grytsov@xxxxxxxx>
Signed-off-by: Oleksandr Dmytryshyn <oleksandr.dmytryshyn@xxxxxxxxxxxxxxx>
Signed-off-by: Iurii Konovalenko <iurii.konovalenko@xxxxxxxxxxxxxxx>

---
Changes since v1:
 * removed __attribute__((__packed__)) from all structures definitions

Changes since v2:
 * removed all C structures
 * added protocol description between frontend and backend drivers

Changes since v3:
 * fixed some typos
 * renamed XENSND_PCM_FORMAT_FLOAT_** to XENSND_PCM_FORMAT_F32_**
 * renamed XENSND_PCM_FORMAT_FLOAT64_** to XENSND_PCM_FORMAT_F64_**
 * added 'id' field to the request and response packets
 * renamed 'stream_id' to 'stream' in the packets description
 * renamed 'pcm_data_rate' to 'pcm_rate' in the packets description
 * renamed 'pcm_stream_type' to 'pcm_type' in the packets description
 * removed 'stream_id' field from the response packets

Changes since v4:
 * renamed 'stream_id' back to the to 'stream' in the packets description
 * moved 'id' field to the upper position in the response packets

Changes since v5:
 * Slightly reworked request/response packets
 * Size of the request/response packet is changed to the 64 bytes
 * Now parameters for the XENSND_OP_SET_VOLUME/XENSND_OP_GET_VOLUME are
   passed via shared page
 * Added parameters for the XenBus nodes (now each stream can be mapped
   to the defined sound device in the backend using those parameters)
 * Added XenBus state diagrams description

Changes since v6:
 * Reworked streams description  in the Backend XenBus Nodes

Changes since v7:
 * re-worked backend device parameters to be more generic and flexible
 * extended frontend device parameters
 * slightly updated state machine description added mute/unmute commands
 * added constants for XenStore configuration strings
   (fields, PCM formats etc.)
 * changed request/response structure size from 64 octets to 16
 * introduced dynamic buffer allocation instead of
   static XENSND_MAX_PAGES_PER_REQUEST
 * re-worked open request to allow dynamic buffer allocation
 * re-worked read/write/volume requests, so they don't pass grefs:
   buffer from the open request is used for these operations to pass data
 * specified type of the volume value to be a signed value in steps
   of 0.001 dBm, while 0 being 0dBm.
 * added Linux include file with structure definitions

Changes since v8:
 * changed frontend-id to frontend_id
 * single sound card support, configured with bunch of
   devices/streams
 * clarifucation made on sample rates and formats expressed as
   decimals w/o any particular ordering
 * put description of migration/disconnection state
 * replaced __attribute__((packed)) to __packed
 * changed padding of ring structures to 64 to fit cache line
 * removeed #ifdef __KERNEL
 * explicitly stated which indices in XenStore configuration
   are contiguous
 * added description to what frontend's defaults are
 * made names of virtual card/devices optional
 * removed PCM_FORMAT_SPECIAL
 * changed volume units from dBm to dB

Changes since v9:
 * removed sndif_linux.h
 * moved all structures from sndif_linux.h to sndif.h
 * structures padded where needed
 * fixed Hz comment

Changes since v10:
 * fixed tabs to 4 spaces to comply with Xen coding style
 * added placeholders to empty structures (C89 concern)
 * added missing header includes

Changes since v11:
 * added XENSND_RSP_NOTSUPP error code
 * changed gref[0] to gref[1] with comment
 * modified comments on empty structures
 * removed "__" from member names
 * fixed indentation
 * added padding in union xensnd_resp
 * changed __XEN_PUBLIC_IO_XENSND_H__ to __XEN_PUBLIC_IO_SNDIF_H__

Changes since v12:
 * changed indentation for defines
 * missed ";" after gref[1]
 * documentation changes
 * changed req/resp structures
 * changed xensnd_page_directory structure
 * pass buffer size in open request

Changes since v13:
 * note on usage of grant ref 0
 * all page sizes are XEN_PAGE_SIZE
 * padding/reserved cleanup/fixes
 * removed empty structures

Changes since v14:
 * turn padding into reserved

Changes since v15:
 * protocol description reworked
 * added offset to block notations
 * used -XEN_EXX for status reporting
 * added protocol versioning
 * removed stream_idx from the packet structure
 * changed xenstore paths
---

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@xxxxxxxx>
---
 xen/include/public/io/sndif.h | 725 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 725 insertions(+)
 create mode 100644 xen/include/public/io/sndif.h

diff --git a/xen/include/public/io/sndif.h b/xen/include/public/io/sndif.h
new file mode 100644
index 000000000000..5f7b078aab6f
--- /dev/null
+++ b/xen/include/public/io/sndif.h
@@ -0,0 +1,725 @@
+/******************************************************************************
+ * sndif.h
+ *
+ * Unified sound-device I/O interface for Xen guest OSes.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (C) 2013-2015 GlobalLogic Inc.
+ * Copyright (C) 2016-2017 EPAM Systems Inc.
+ *
+ * Authors: Oleksandr Andrushchenko <oleksandr_andrushchenko@xxxxxxxx>
+ *          Oleksandr Grytsov <oleksandr_grytsov@xxxxxxxx>
+ *          Oleksandr Dmytryshyn <oleksandr.dmytryshyn@xxxxxxxxxxxxxxx>
+ *          Iurii Konovalenko <iurii.konovalenko@xxxxxxxxxxxxxxx>
+ */
+
+#ifndef __XEN_PUBLIC_IO_SNDIF_H__
+#define __XEN_PUBLIC_IO_SNDIF_H__
+
+#include "ring.h"
+#include "../grant_table.h"
+
+/*
+ *****************************************************************************
+ *                  Feature and Parameter Negotiation
+ *****************************************************************************
+ *
+ * Front->back notifications: when enqueuing a new request, sending a
+ * notification can be made conditional on xensnd_req (i.e., the generic
+ * hold-off mechanism provided by the ring macros). Backends must set
+ * xensnd_req appropriately (e.g., using RING_FINAL_CHECK_FOR_REQUESTS()).
+ *
+ * Back->front notifications: when enqueuing a new response, sending a
+ * notification can be made conditional on xensnd_resp (i.e., the generic
+ * hold-off mechanism provided by the ring macros). Frontends must set
+ * xensnd_resp appropriately (e.g., using RING_FINAL_CHECK_FOR_RESPONSES()).
+ *
+ * The two halves of a para-virtual sound card driver utilize nodes within
+ * XenStore to communicate capabilities and to negotiate operating parameters.
+ * This section enumerates these nodes which reside in the respective front and
+ * backend portions of XenStore, following the XenBus convention.
+ *
+ * All data in XenStore is stored as strings. Nodes specifying numeric
+ * values are encoded in decimal. Integer value ranges listed below are
+ * expressed as fixed sized integer types capable of storing the conversion
+ * of a properly formated node string, without loss of information.
+ *
+ ******************************************************************************
+ *                        Example configuration
+ ******************************************************************************
+ *
+ * Note: depending on the use-case backend can expose more sound cards and
+ * PCM devices/streams than the underlying HW physically has by employing
+ * SW mixers, configuring virtual sound streams, channels etc.
+ *
+ * This is an example of backend and frontend configuration:
+ *
+ *--------------------------------- Backend -----------------------------------
+ *
+ * /local/domain/0/backend/vsnd/1/0/frontend-id = "1"
+ * /local/domain/0/backend/vsnd/1/0/frontend = "/local/domain/1/device/vsnd/0"
+ * /local/domain/0/backend/vsnd/1/0/state = "4"
+ * /local/domain/0/backend/vsnd/1/0/versions = "1,2"
+ *
+ *--------------------------------- Frontend ----------------------------------
+ *
+ * /local/domain/1/device/vsnd/0/backend-id = "0"
+ * /local/domain/1/device/vsnd/0/backend = "/local/domain/0/backend/vsnd/1/0"
+ * /local/domain/1/device/vsnd/0/state = "4"
+ *
+ *----------------------------- Card configuration ----------------------------
+ *
+ * /local/domain/1/device/vsnd/0/version = "1"
+ *
+ * /local/domain/1/device/vsnd/0/short-name = "Card short name"
+ * /local/domain/1/device/vsnd/0/long-name = "Card long name"
+ * /local/domain/1/device/vsnd/0/sample-rates = "8000,32000,44100,48000,96000"
+ * /local/domain/1/device/vsnd/0/sample-formats = "s8,u8,s16_le,s16_be"
+ * /local/domain/1/device/vsnd/0/buffer-size = "262144"
+ *
+ *------------------------------- PCM device 0 --------------------------------
+ *
+ * /local/domain/1/device/vsnd/0/pcm-dev/0/name = "General analog"
+ * /local/domain/1/device/vsnd/0/pcm-dev/0/channels-max = "5"
+ *
+ *----------------------------- Stream 0, playback ----------------------------
+ *
+ * /local/domain/1/device/vsnd/0/pcm-dev/0/stream-0/type = "p"
+ * /local/domain/1/device/vsnd/0/pcm-dev/0/stream-0/sample-formats = "s8,u8"
+ * /local/domain/1/device/vsnd/0/pcm-dev/0/stream-0/unique-id = "0"
+ *
+ * /local/domain/1/device/vsnd/0/pcm-dev/0/stream-0/ring-ref = "386"
+ * /local/domain/1/device/vsnd/0/pcm-dev/0/stream-0/event-channel = "15"
+ *
+ *------------------------------ Stream 1, capture ----------------------------
+ *
+ * /local/domain/1/device/vsnd/0/pcm-dev/0/stream-1/type = "c"
+ * /local/domain/1/device/vsnd/0/pcm-dev/0/stream-1/channels-max = "2"
+ * /local/domain/1/device/vsnd/0/pcm-dev/0/stream-1/unique-id = "1"
+ *
+ * /local/domain/1/device/vsnd/0/pcm-dev/0/stream-1/ring-ref = "384"
+ * /local/domain/1/device/vsnd/0/pcm-dev/0/stream-1/event-channel = "13"
+ *
+ *------------------------------- PCM device 3 --------------------------------
+ *
+ * /local/domain/1/device/vsnd/0/pcm-dev/3/name = "HDMI-0"
+ * /local/domain/1/device/vsnd/0/pcm-dev/3/sample-rates = "8000,32000,44100"
+ *
+ *------------------------------ Stream 0, capture ----------------------------
+ *
+ * /local/domain/1/device/vsnd/0/pcm-dev/3/stream-0/type = "c"
+ * /local/domain/1/device/vsnd/0/pcm-dev/3/stream-0/unique-id = "2"
+ *
+ * /local/domain/1/device/vsnd/0/pcm-dev/3/stream-0/ring-ref = "387"
+ * /local/domain/1/device/vsnd/0/pcm-dev/3/stream-0/event-channel = "151"
+ *
+ *------------------------------- PCM device 7 --------------------------------
+ *
+ * /local/domain/1/device/vsnd/0/pcm-dev/7/name = "SPDIF"
+ *
+ *----------------------------- Stream 0, playback ----------------------------
+ *
+ * /local/domain/1/device/vsnd/0/pcm-dev/7/stream-0/type = "p"
+ * /local/domain/1/device/vsnd/0/pcm-dev/7/stream-0/unique-id = "3"
+ *
+ * /local/domain/1/device/vsnd/0/pcm-dev/7/stream-0/ring-ref = "389"
+ * /local/domain/1/device/vsnd/0/pcm-dev/7/stream-0/event-channel = "152"
+ *
+ *
+ ******************************************************************************
+ *                            Backend XenBus Nodes
+ ******************************************************************************
+ *
+ *----------------------------- Protocol version ------------------------------
+ *
+ * versions
+ *      Values:         <string>
+ *
+ *      List of XENSND_LIST_SEPARATOR separated protocol versions supported
+ *      by the backend. For example "1,2,3".
+ *
+ ******************************************************************************
+ *                            Frontend XenBus Nodes
+ ******************************************************************************
+ *
+ *-------------------------------- Addressing ---------------------------------
+ *
+ * dev-id
+ *      Values:         <uint8_t>
+ *
+ *      Unique device ID. Doesn't have to be zero based and/or to be 
contiguous.
+ *      Example:
+ *         /local/domain/1/device/vsnd/0/pcm-dev/<dev-id>/...
+ *
+ * stream-idx
+ *      Values:         <uint8_t>
+ *
+ *      Zero based contiguous index of the stream of the device.
+ *      Example:
+ *        
/local/domain/1/device/vsnd/0/pcm-dev/<dev-id>/stream-<stream-idx>/...
+ *
+ *----------------------------- Protocol version ------------------------------
+ *
+ * version
+ *      Values:         <string>
+ *
+ *      Protocol version, chosen among the ones supported by the backend.
+ *
+ *------------------------------- PCM settings --------------------------------
+ *
+ * Every virtualized sound frontend has a set of PCM devices and streams, each
+ * could be individually configured. Part of the PCM configuration can be
+ * defined at higher level of the hierarchy and be fully or partially re-used
+ * by the underlying layers. These configuration values are:
+ *  o number of channels (min/max)
+ *  o supported sample rates
+ *  o supported sample formats.
+ * E.g. one can define these values for the whole card, device or stream.
+ * Every underlying layer in turn can re-define some or all of them to better
+ * fit its needs. For example, card may define number of channels to be
+ * in [1; 8] range, and some particular stream may be limited to [1; 2] only.
+ * The rule is that the underlying layer must be a subset of the upper layer
+ * range.
+ *
+ * channels-min
+ *      Values:         <uint8_t>
+ *
+ *      The minimum amount of channels that is supported, [1; channels-max].
+ *      Optional, if not set or omitted a value of 1 is used.
+ *
+ * channels-max
+ *      Values:         <uint8_t>
+ *
+ *      The maximum amount of channels that is supported.
+ *      Must be at least <channels-min>.
+ *
+ * sample-rates
+ *      Values:         <list of uint32_t>
+ *
+ *      List of supported sample rates separated by XENSND_LIST_SEPARATOR.
+ *      Sample rates are expressed as a list of decimal values w/o any
+ *      ordering requirement.
+ *
+ * sample-formats
+ *      Values:         <list of XENSND_PCM_FORMAT_XXX_STR>
+ *
+ *      List of supported sample formats separated by XENSND_LIST_SEPARATOR.
+ *      Items must not exceed XENSND_SAMPLE_FORMAT_MAX_LEN length.
+ *
+ * buffer-size
+ *      Values:         <uint32_t>
+ *
+ *      The maximum size in octets of the buffer to allocate per stream.
+ *
+ *----------------------- Virtual sound card settings 
--------------------------
+ * short-name
+ *      Values:         <char[32]>
+ *
+ *      Short name of the virtual sound card. Optional.
+ *
+ * long-name
+ *      Values:         <char[80]>
+ *
+ *      Long name of the virtual sound card. Optional.
+ *
+ *----------------------------- Device settings 
--------------------------------
+ * name
+ *      Values:         <char[80]>
+ *
+ *      Name of the sound device within the virtual sound card. Optional.
+ *
+ *----------------------------- Stream settings -------------------------------
+ *
+ * type
+ *      Values:         "p", "c"
+ *
+ *      Stream type: "p" - playback stream, "c" - capture stream
+ *
+ *      If both capture and playback are needed then two streams need to be
+ *      defined under the same device.
+ *
+ * unique-id
+ *      Values:         <uint32_t>
+ *
+ *      After stream initialization it is assigned a unique ID (within the 
front
+ *      driver), so every stream of the frontend can be identified by the
+ *      backend by this ID. This is not equal to stream-idx as the later is
+ *      zero based within the device, but this index is contigous within the
+ *      driver.
+ *
+ *-------------------- Stream Request Transport Parameters --------------------
+ *
+ * event-channel
+ *      Values:         <uint32_t>
+ *
+ *      The identifier of the Xen event channel used to signal activity
+ *      in the ring buffer.
+ *
+ * ring-ref
+ *      Values:         <uint32_t>
+ *
+ *      The Xen grant reference granting permission for the backend to map
+ *      a sole page in a single page sized ring buffer.
+ *
+ ******************************************************************************
+ *                               STATE DIAGRAMS
+ ******************************************************************************
+ *
+ * Tool stack creates front and back state nodes with initial state
+ * XenbusStateInitialising.
+ * Tool stack creates and sets up frontend sound configuration nodes per 
domain.
+ *
+ * Front                                Back
+ * =================================    =====================================
+ * XenbusStateInitialising              XenbusStateInitialising
+ *                                       o Query backend device identification
+ *                                         data.
+ *                                       o Open and validate backend device.
+ *                                                      |
+ *                                                      |
+ *                                                      V
+ *                                      XenbusStateInitWait
+ *
+ * o Query frontend configuration
+ * o Allocate and initialize
+ *   event channels per configured
+ *   playback/capture stream.
+ * o Publish transport parameters
+ *   that will be in effect during
+ *   this connection.
+ *              |
+ *              |
+ *              V
+ * XenbusStateInitialised
+ *
+ *                                       o Query frontend transport parameters.
+ *                                       o Connect to the event channels.
+ *                                                      |
+ *                                                      |
+ *                                                      V
+ *                                      XenbusStateConnected
+ *
+ *  o Create and initialize OS
+ *  virtual sound device instances
+ *  as per configuration.
+ *              |
+ *              |
+ *              V
+ * XenbusStateConnected
+ *
+ *                                      XenbusStateUnknown
+ *                                      XenbusStateClosed
+ *                                      XenbusStateClosing
+ * o Remove virtual sound device
+ * o Remove event channels
+ *              |
+ *              |
+ *              V
+ * XenbusStateClosed
+ *
+ ******************************************************************************
+ *                             PCM FORMATS
+ ******************************************************************************
+ *
+ * XENSND_PCM_FORMAT_<format>[_<endian>]
+ *
+ * format: <S/U/F><bits> or <name>
+ *     S - signed, U - unsigned, F - float
+ *     bits - 8, 16, 24, 32
+ *     name - MU_LAW, GSM, etc.
+ *
+ * endian: <LE/BE>, may be absent
+ *     LE - Little endian, BE - Big endian
+ */
+#define XENSND_PCM_FORMAT_S8            0
+#define XENSND_PCM_FORMAT_U8            1
+#define XENSND_PCM_FORMAT_S16_LE        2
+#define XENSND_PCM_FORMAT_S16_BE        3
+#define XENSND_PCM_FORMAT_U16_LE        4
+#define XENSND_PCM_FORMAT_U16_BE        5
+#define XENSND_PCM_FORMAT_S24_LE        6
+#define XENSND_PCM_FORMAT_S24_BE        7
+#define XENSND_PCM_FORMAT_U24_LE        8
+#define XENSND_PCM_FORMAT_U24_BE        9
+#define XENSND_PCM_FORMAT_S32_LE        10
+#define XENSND_PCM_FORMAT_S32_BE        11
+#define XENSND_PCM_FORMAT_U32_LE        12
+#define XENSND_PCM_FORMAT_U32_BE        13
+#define XENSND_PCM_FORMAT_F32_LE        14 /* 4-byte float, IEEE-754 32-bit, */
+#define XENSND_PCM_FORMAT_F32_BE        15 /* range -1.0 to 1.0              */
+#define XENSND_PCM_FORMAT_F64_LE        16 /* 8-byte float, IEEE-754 64-bit, */
+#define XENSND_PCM_FORMAT_F64_BE        17 /* range -1.0 to 1.0              */
+#define XENSND_PCM_FORMAT_IEC958_SUBFRAME_LE 18
+#define XENSND_PCM_FORMAT_IEC958_SUBFRAME_BE 19
+#define XENSND_PCM_FORMAT_MU_LAW        20
+#define XENSND_PCM_FORMAT_A_LAW         21
+#define XENSND_PCM_FORMAT_IMA_ADPCM     22
+#define XENSND_PCM_FORMAT_MPEG          23
+#define XENSND_PCM_FORMAT_GSM           24
+
+/*
+ ******************************************************************************
+ *                             REQUEST CODES
+ ******************************************************************************
+ */
+#define XENSND_OP_OPEN                  0
+#define XENSND_OP_CLOSE                 1
+#define XENSND_OP_READ                  2
+#define XENSND_OP_WRITE                 3
+#define XENSND_OP_SET_VOLUME            4
+#define XENSND_OP_GET_VOLUME            5
+#define XENSND_OP_MUTE                  6
+#define XENSND_OP_UNMUTE                7
+
+/*
+ ******************************************************************************
+ *               XENSTORE FIELD AND PATH NAME STRINGS, HELPERS
+ ******************************************************************************
+ */
+#define XENSND_DRIVER_NAME              "vsnd"
+
+#define XENSND_LIST_SEPARATOR           ","
+/* Path entries */
+#define XENSND_PATH_PCM_DEVICE          "pcm-dev"
+#define XENSND_PATH_STREAM_FMT          "stream-%d"
+/* Field names */
+#define XENSND_FIELD_VCARD_SHORT_NAME   "short-name"
+#define XENSND_FIELD_VCARD_LONG_NAME    "long-name"
+#define XENSND_FIELD_RING_REF           "ring-ref"
+#define XENSND_FIELD_EVT_CHNL           "event-channel"
+#define XENSND_FIELD_DEVICE_NAME        "name"
+#define XENSND_FIELD_TYPE               "type"
+#define XENSND_FIELD_STREAM_UNIQUE_ID   "unique-id"
+#define XENSND_FIELD_CHANNELS_MIN       "channels-min"
+#define XENSND_FIELD_CHANNELS_MAX       "channels-max"
+#define XENSND_FIELD_SAMPLE_RATES       "sample-rates"
+#define XENSND_FIELD_SAMPLE_FORMATS     "sample-formats"
+#define XENSND_FIELD_BUFFER_SIZE        "buffer-size"
+
+/* Stream type field values. */
+#define XENSND_STREAM_TYPE_PLAYBACK     "p"
+#define XENSND_STREAM_TYPE_CAPTURE      "c"
+/* Sample rate max string length */
+#define XENSND_SAMPLE_RATE_MAX_LEN      11
+/* Sample format field values */
+#define XENSND_SAMPLE_FORMAT_MAX_LEN    24
+
+#define XENSND_PCM_FORMAT_S8_STR        "s8"
+#define XENSND_PCM_FORMAT_U8_STR        "u8"
+#define XENSND_PCM_FORMAT_S16_LE_STR    "s16_le"
+#define XENSND_PCM_FORMAT_S16_BE_STR    "s16_be"
+#define XENSND_PCM_FORMAT_U16_LE_STR    "u16_le"
+#define XENSND_PCM_FORMAT_U16_BE_STR    "u16_be"
+#define XENSND_PCM_FORMAT_S24_LE_STR    "s24_le"
+#define XENSND_PCM_FORMAT_S24_BE_STR    "s24_be"
+#define XENSND_PCM_FORMAT_U24_LE_STR    "u24_le"
+#define XENSND_PCM_FORMAT_U24_BE_STR    "u24_be"
+#define XENSND_PCM_FORMAT_S32_LE_STR    "s32_le"
+#define XENSND_PCM_FORMAT_S32_BE_STR    "s32_be"
+#define XENSND_PCM_FORMAT_U32_LE_STR    "u32_le"
+#define XENSND_PCM_FORMAT_U32_BE_STR    "u32_be"
+#define XENSND_PCM_FORMAT_F32_LE_STR    "float_le"
+#define XENSND_PCM_FORMAT_F32_BE_STR    "float_be"
+#define XENSND_PCM_FORMAT_F64_LE_STR    "float64_le"
+#define XENSND_PCM_FORMAT_F64_BE_STR    "float64_be"
+#define XENSND_PCM_FORMAT_IEC958_SUBFRAME_LE_STR "iec958_subframe_le"
+#define XENSND_PCM_FORMAT_IEC958_SUBFRAME_BE_STR "iec958_subframe_be"
+#define XENSND_PCM_FORMAT_MU_LAW_STR    "mu_law"
+#define XENSND_PCM_FORMAT_A_LAW_STR     "a_law"
+#define XENSND_PCM_FORMAT_IMA_ADPCM_STR "ima_adpcm"
+#define XENSND_PCM_FORMAT_MPEG_STR      "mpeg"
+#define XENSND_PCM_FORMAT_GSM_STR       "gsm"
+
+
+/*
+ ******************************************************************************
+ *                          STATUS RETURN CODES
+ ******************************************************************************
+ *
+ * Status return code is zero on success and -XEN_EXX on failure.
+ *
+ ******************************************************************************
+ *                              Assumptions
+ ******************************************************************************
+ * o usage of grant reference 0 as invalid grant reference:
+ *   grant reference 0 is valid, but never exposed to a PV driver,
+ *   because of the fact it is already in use/reserved by the PV console.
+ * o all references in this document to page sizes must be treated
+ *   as pages of size XEN_PAGE_SIZE unless otherwise noted.
+ *
+ ******************************************************************************
+ *       Description of the protocol between frontend and backend driver
+ ******************************************************************************
+ *
+ * The two halves of a Para-virtual sound driver communicate with
+ * each other using shared pages and event channels.
+ * Shared page contains a ring with request/response packets.
+ *
+ * All reserved fields in the structures below must be 0.
+ *
+ *---------------------------------- Requests ---------------------------------
+ *
+ * All request packets have the same length (32 octets)
+ * All request packets have common header:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |    operation   |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ *   id - uint16_t, private guest value, echoed in response
+ *   operation - uint8_t, operation code, XENSND_OP_???
+ *
+ * Request open - open a PCM stream for playback or capture:
+ *
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                | XENSND_OP_OPEN |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                             pcm_rate                              | 12
+ * +----------------+----------------+----------------+----------------+
+ * |  pcm_format    |  pcm_channels  |             reserved            | 16
+ * +----------------+----------------+----------------+----------------+
+ * |                             buffer_sz                             | 20
+ * +----------------+----------------+----------------+----------------+
+ * |                        gref_directory_start                       | 24
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 28
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 32
+ * +----------------+----------------+----------------+----------------+
+ *
+ * pcm_rate - uint32_t, stream data rate, Hz
+ * pcm_format - uint8_t, XENSND_PCM_FORMAT_XXX value
+ * pcm_channels - uint8_t, number of channels of this stream,
+ *   [channels-min; channels-max]
+ * buffer_sz - uint32_t, buffer size to be allocated, octets
+ * gref_directory_start - grant_ref_t, a reference to the first shared page
+ *   describing shared buffer references. At least one page exists. If shared
+ *   buffer size  (buffer_sz) exceeds what can be addressed by this single 
page,
+ *   then reference to the next page must be supplied (see gref_dir_next_page
+ *   below)
+ */
+
+struct xensnd_open_req {
+    uint32_t pcm_rate;
+    uint8_t pcm_format;
+    uint8_t pcm_channels;
+    uint16_t reserved;
+    uint32_t buffer_sz;
+    grant_ref_t gref_directory_start;
+};
+
+/*
+ * Shared page for XENSND_OP_OPEN buffer descriptor (gref_directory in the
+ *   request) employs a list of pages, describing all pages of the shared data
+ *   buffer:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |                        gref_dir_next_page                         | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                              gref[0]                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                              gref[i]                              | i*4+8
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             gref[N - 1]                           | N*4+8
+ * +----------------+----------------+----------------+----------------+
+ *
+ * gref_dir_next_page - grant_ref_t, reference to the next page describing
+ *   page directory. Must be 0 if there are no more pages in the list.
+ * gref[i] - grant_ref_t, reference to a shared page of the buffer
+ *   allocated at XENSND_OP_OPEN
+ *
+ * Number of grant_ref_t entries in the whole page directory is not
+ * passed, but instead can be calculated as:
+ *   num_grefs_total = (XENSND_OP_OPEN.buffer_sz + XEN_PAGE_SIZE - 1) /
+ *       XEN_PAGE_SIZE
+ */
+
+struct xensnd_page_directory {
+    grant_ref_t gref_dir_next_page;
+    grant_ref_t gref[1]; /* Variable length */
+};
+
+/*
+ *  Request close - close an opened pcm stream:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                | XENSND_OP_CLOSE|    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 32
+ * +----------------+----------------+----------------+----------------+
+ *
+ * Request read/write - used for read (for capture) or write (for playback):
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |   operation    |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                              offset                               | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                              length                               | 16
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 20
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 32
+ * +----------------+----------------+----------------+----------------+
+ *
+ * operation - XENSND_OP_READ for read or XENSND_OP_WRITE for write
+ * offset - uint32_t, read or write data offset within the shared buffer,
+ *   passed with XENSND_OP_OPEN request, octets. Must be less than buffer_sz.
+ * length - uint32_t, read or write data length, octets
+ */
+
+struct xensnd_rw_req {
+    uint32_t offset;
+    uint32_t len;
+};
+
+/*
+ * Request set/get volume - set/get channels' volume of the stream given:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |   operation    |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 32
+ * +----------------+----------------+----------------+----------------+
+ *
+ * operation - XENSND_OP_SET_VOLUME for volume set
+ *   or XENSND_OP_GET_VOLUME for volume get
+ * Buffer passed with XENSND_OP_OPEN is used to exchange volume
+ * values:
+ *
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |                             channel[0]                            | 4
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             channel[i]                            | i*4
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                           channel[N - 1]                          | 
(N-1)*4
+ * +----------------+----------------+----------------+----------------+
+ *
+ * N = XENSND_OP_OPEN.pcm_channels
+ * i - uint8_t, index of a channel
+ * channel[i] - sint32_t, volume of i-th channel
+ * Volume is expressed as a signed value in steps of 0.001 dB,
+ * while 0 being 0 dB.
+ *
+ * Request mute/unmute - mute/unmute stream:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |   operation    |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 32
+ * +----------------+----------------+----------------+----------------+
+ *
+ * operation - XENSND_OP_MUTE for mute or XENSND_OP_UNMUTE for unmute
+ * Buffer passed with XENSND_OP_OPEN is used to exchange mute/unmute
+ * values:
+ *
+ *                                   0                                 octet
+ * +----------------+----------------+----------------+----------------+
+ * |                             channel[0]                            | 4
+ * +----------------+----------------+----------------+----------------+
+ * +/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             channel[i]                            | i*4
+ * +----------------+----------------+----------------+----------------+
+ * +/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                           channel[N - 1]                          | 
(N-1)*4
+ * +----------------+----------------+----------------+----------------+
+ *
+ * N = XENSND_OP_OPEN.pcm_channels
+ * i - uint8_t, index of a channel
+ * channel[i] - uint8_t, non-zero if i-th channel needs to be muted/unmuted
+ *
+ *---------------------------------- Responses --------------------------------
+ *
+ * All response packets have the same length (32 octets)
+ *
+ * Response for all requests:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |    operation   |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                               status                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 12
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 32
+ * +----------------+----------------+----------------+----------------+
+ *
+ * id - uint16_t, copied from the request
+ * operation - uint8_t, XENSND_OP_* - copied from request
+ * status - int32_t, response status, zero on success and -XEN_EXX on failure
+ */
+
+struct xensnd_req {
+    uint16_t id;
+    uint8_t operation;
+    uint8_t reserved[5];
+    union {
+        struct xensnd_open_req open;
+        struct xensnd_rw_req rw;
+        uint8_t reserved[24];
+    } op;
+};
+
+struct xensnd_resp {
+    uint16_t id;
+    uint8_t operation;
+    uint8_t reserved;
+    int32_t status;
+    uint8_t reserved1[24];
+};
+
+DEFINE_RING_TYPES(xen_sndif, struct xensnd_req, struct xensnd_resp);
+
+#endif /* __XEN_PUBLIC_IO_SNDIF_H__ */
-- 
2.7.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.