[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [RFC PATCH v2 11/26] ARM: GICv3: enable ITS and LPIs on the host



Now that the host part of the ITS code is in place, we can enable the
ITS and also LPIs on each redistributor to get the show rolling.
At this point there would be no LPIs mapped, as guests don't know about
the ITS yet.

Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
---
 xen/arch/arm/gic-its.c |  4 ++++
 xen/arch/arm/gic-v3.c  | 19 +++++++++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/xen/arch/arm/gic-its.c b/xen/arch/arm/gic-its.c
index 0d4ca1b..602e19a 100644
--- a/xen/arch/arm/gic-its.c
+++ b/xen/arch/arm/gic-its.c
@@ -375,6 +375,10 @@ int gicv3_its_init(struct host_its *hw_its)
     its_send_cmd_mapc(hw_its, smp_processor_id(), smp_processor_id());
     its_send_cmd_sync(hw_its, smp_processor_id());
 
+    /* Now enable interrupt translation on that ITS. */
+    reg = readl_relaxed(hw_its->its_base + GITS_CTLR);
+    writel_relaxed(reg | GITS_CTLR_ENABLE, hw_its->its_base + GITS_CTLR);
+
     return 0;
 }
 
diff --git a/xen/arch/arm/gic-v3.c b/xen/arch/arm/gic-v3.c
index d2461cb..5bfdf24 100644
--- a/xen/arch/arm/gic-v3.c
+++ b/xen/arch/arm/gic-v3.c
@@ -648,6 +648,21 @@ static int gicv3_rdist_init_lpis(void __iomem * rdist_base)
     return 0;
 }
 
+/* Enable LPIs on this redistributor (only useful when the host has an ITS. */
+static bool gicv3_enable_lpis(void)
+{
+    uint32_t val;
+
+    val = readl_relaxed(GICD_RDIST_BASE + GICR_TYPER);
+    if ( !(val & GICR_TYPER_PLPIS) )
+        return false;
+
+    val = readl_relaxed(GICD_RDIST_BASE + GICR_CTLR);
+    writel_relaxed(val | GICR_CTLR_ENABLE_LPIS, GICD_RDIST_BASE + GICR_CTLR);
+
+    return true;
+}
+
 static int __init gicv3_populate_rdist(void)
 {
     int i;
@@ -755,6 +770,10 @@ static int gicv3_cpu_init(void)
     if ( gicv3_enable_redist() )
         return -ENODEV;
 
+    /* If the host has any ITSes, enable LPIs now. */
+    if ( !list_empty(&host_its_list) )
+        gicv3_enable_lpis();
+
     /* Set priority on PPI and SGI interrupts */
     priority = (GIC_PRI_IPI << 24 | GIC_PRI_IPI << 16 | GIC_PRI_IPI << 8 |
                 GIC_PRI_IPI);
-- 
2.9.0


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.