|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v3.1 12/15] xen/x86: populate PVHv2 Dom0 physical memory map
Craft the Dom0 e820 memory map and populate it.
Signed-off-by: Roger Pau Monné <roger.pau@xxxxxxxxxx>
---
Cc: Jan Beulich <jbeulich@xxxxxxxx>
Cc: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
---
Changes since v2:
- Introduce get_order_from_bytes_floor as a local function to
domain_build.c.
- Remove extra asserts.
- Make hvm_populate_memory_range return an error code instead of panicking.
- Fix comments and printks.
- Use ULL sufix instead of casting to uint64_t.
- Rename hvm_setup_vmx_unrestricted_guest to
hvm_setup_vmx_realmode_helpers.
- Only substract two pages from the memory calculation, that will be used
by the MADT replacement.
- Remove some comments.
- Remove printing allocation information.
- Don't stash any pages for the MADT, TSS or ident PT, those will be
subtracted directly from RAM regions of the memory map.
- Count the number of iterations before calling process_pending_softirqs
when populating the memory map.
- Move the initial call to process_pending_softirqs into construct_dom0,
and remove the ones from construct_dom0_hvm and construct_dom0_pv.
- Make memflags global so it can be shared between alloc_chunk and
hvm_populate_memory_range.
Changes since RFC:
- Use IS_ALIGNED instead of checking with PAGE_MASK.
- Use the new %pB specifier in order to print sizes in human readable form.
- Create a VM86 TSS for hardware that doesn't support unrestricted mode.
- Subtract guest RAM for the identity page table and the VM86 TSS.
- Split the creation of the unrestricted mode helper structures to a
separate function.
- Use preemption with paging_set_allocation.
- Use get_order_from_bytes_floor.
---
xen/arch/x86/domain_build.c | 275 ++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 266 insertions(+), 9 deletions(-)
diff --git a/xen/arch/x86/domain_build.c b/xen/arch/x86/domain_build.c
index 2c9ebf2..ec1ac89 100644
--- a/xen/arch/x86/domain_build.c
+++ b/xen/arch/x86/domain_build.c
@@ -22,6 +22,7 @@
#include <xen/compat.h>
#include <xen/libelf.h>
#include <xen/pfn.h>
+#include <xen/guest_access.h>
#include <asm/regs.h>
#include <asm/system.h>
#include <asm/io.h>
@@ -43,6 +44,9 @@ static long __initdata dom0_nrpages;
static long __initdata dom0_min_nrpages;
static long __initdata dom0_max_nrpages = LONG_MAX;
+/* Size of the VM86 TSS for virtual 8086 mode to use. */
+#define HVM_VM86_TSS_SIZE 128
+
/*
* dom0_mem=[min:<min_amt>,][max:<max_amt>,][<amt>]
*
@@ -190,6 +194,14 @@ struct vcpu *__init alloc_dom0_vcpu0(struct domain *dom0)
return setup_dom0_vcpu(dom0, 0, cpumask_first(&dom0_cpus));
}
+static unsigned int __init get_order_from_bytes_floor(paddr_t size)
+{
+ unsigned int order;
+
+ order = get_order_from_bytes(size + 1);
+ return order > 0 ? order - 1 : order;
+}
+
#ifdef CONFIG_SHADOW_PAGING
bool __initdata opt_dom0_shadow;
boolean_param("dom0_shadow", opt_dom0_shadow);
@@ -213,11 +225,12 @@ boolean_param("ro-hpet", ro_hpet);
#define round_pgup(_p) (((_p)+(PAGE_SIZE-1))&PAGE_MASK)
#define round_pgdown(_p) ((_p)&PAGE_MASK)
+static unsigned int __initdata memflags = MEMF_no_dma|MEMF_exact_node;
+
static struct page_info * __init alloc_chunk(
struct domain *d, unsigned long max_pages)
{
static unsigned int __initdata last_order = MAX_ORDER;
- static unsigned int __initdata memflags = MEMF_no_dma|MEMF_exact_node;
struct page_info *page;
unsigned int order = get_order_from_pages(max_pages), free_order;
@@ -302,7 +315,8 @@ static unsigned long __init compute_dom0_nr_pages(
avail -= max_pdx >> s;
}
- need_paging = opt_dom0_shadow || (is_pvh_domain(d) && !iommu_hap_pt_share);
+ need_paging = opt_dom0_shadow || (has_hvm_container_domain(d) &&
+ (!iommu_hap_pt_share || !paging_mode_hap(d)));
for ( ; ; need_paging = 0 )
{
nr_pages = dom0_nrpages;
@@ -334,7 +348,8 @@ static unsigned long __init compute_dom0_nr_pages(
avail -= dom0_paging_pages(d, nr_pages);
}
- if ( (parms->p2m_base == UNSET_ADDR) && (dom0_nrpages <= 0) &&
+ if ( is_pv_domain(d) &&
+ (parms->p2m_base == UNSET_ADDR) && (dom0_nrpages <= 0) &&
((dom0_min_nrpages <= 0) || (nr_pages > min_pages)) )
{
/*
@@ -545,11 +560,12 @@ static __init void pvh_map_all_iomem(struct domain *d,
unsigned long nr_pages)
ASSERT(nr_holes == 0);
}
-static __init void pvh_setup_e820(struct domain *d, unsigned long nr_pages)
+static __init void hvm_setup_e820(struct domain *d, unsigned long nr_pages)
{
struct e820entry *entry, *entry_guest;
unsigned int i;
unsigned long pages, cur_pages = 0;
+ uint64_t start, end;
/*
* Craft the e820 memory map for Dom0 based on the hardware e820 map.
@@ -577,8 +593,19 @@ static __init void pvh_setup_e820(struct domain *d,
unsigned long nr_pages)
continue;
}
- *entry_guest = *entry;
- pages = PFN_UP(entry_guest->size);
+ /*
+ * Make sure the start and length are aligned to PAGE_SIZE, because
+ * that's the minimum granularity of the 2nd stage translation.
+ */
+ start = ROUNDUP(entry->addr, PAGE_SIZE);
+ end = (entry->addr + entry->size) & PAGE_MASK;
+ if ( start >= end )
+ continue;
+
+ entry_guest->type = E820_RAM;
+ entry_guest->addr = start;
+ entry_guest->size = end - start;
+ pages = PFN_DOWN(entry_guest->size);
if ( (cur_pages + pages) > nr_pages )
{
/* Truncate region */
@@ -1010,8 +1037,6 @@ static int __init construct_dom0_pv(
BUG_ON(d->vcpu[0] == NULL);
BUG_ON(v->is_initialised);
- process_pending_softirqs();
-
printk("*** LOADING DOMAIN 0 ***\n");
d->max_pages = ~0U;
@@ -1637,7 +1662,7 @@ static int __init construct_dom0_pv(
dom0_update_physmap(d, pfn, mfn, 0);
pvh_map_all_iomem(d, nr_pages);
- pvh_setup_e820(d, nr_pages);
+ hvm_setup_e820(d, nr_pages);
}
if ( d->domain_id == hardware_domid )
@@ -1653,15 +1678,246 @@ out:
return rc;
}
+/* Populate an HVM memory range using the biggest possible order. */
+static int __init hvm_populate_memory_range(struct domain *d, uint64_t start,
+ uint64_t size)
+{
+ unsigned int order, i = 0;
+ struct page_info *page;
+ int rc;
+#define MAP_MAX_ITER 64
+
+ ASSERT(IS_ALIGNED(size, PAGE_SIZE) && IS_ALIGNED(start, PAGE_SIZE));
+
+ order = MAX_ORDER;
+ while ( size != 0 )
+ {
+ order = min(get_order_from_bytes_floor(size), order);
+ page = alloc_domheap_pages(d, order, memflags);
+ if ( page == NULL )
+ {
+ if ( order == 0 && memflags )
+ {
+ /* Try again without any memflags. */
+ memflags = 0;
+ order = MAX_ORDER;
+ continue;
+ }
+ if ( order == 0 )
+ {
+ printk("Unable to allocate memory with order 0!\n");
+ return -ENOMEM;
+ }
+ order--;
+ continue;
+ }
+
+ rc = guest_physmap_add_page(d, _gfn(PFN_DOWN(start)),
+ _mfn(page_to_mfn(page)), order);
+ if ( rc != 0 )
+ {
+ printk("Failed to populate memory: [%" PRIx64 ",%" PRIx64 ") %d\n",
+ start, start + ((1ULL) << (order + PAGE_SHIFT)), rc);
+ return -ENOMEM;
+ }
+ start += 1ULL << (order + PAGE_SHIFT);
+ size -= 1ULL << (order + PAGE_SHIFT);
+ if ( (++i % MAP_MAX_ITER) == 0 )
+ process_pending_softirqs();
+ }
+
+ return 0;
+#undef MAP_MAX_ITER
+}
+
+static int __init hvm_steal_ram(struct domain *d, unsigned long size,
+ paddr_t limit, paddr_t *addr)
+{
+ unsigned int i;
+
+ for ( i = 1; i <= d->arch.nr_e820; i++ )
+ {
+ struct e820entry *entry = &d->arch.e820[d->arch.nr_e820 - i];
+
+ if ( entry->type != E820_RAM || entry->size < size )
+ continue;
+
+ /* Subtract from the beginning. */
+ if ( entry->addr + size < limit && entry->addr >= MB(1) )
+ {
+ *addr = entry->addr;
+ entry->addr += size;
+ entry->size -= size;
+ return 0;
+ }
+ }
+
+ return -ENOMEM;
+}
+
+static int __init hvm_setup_vmx_realmode_helpers(struct domain *d)
+{
+ p2m_type_t p2mt;
+ uint32_t rc, *ident_pt;
+ uint8_t *tss;
+ mfn_t mfn;
+ paddr_t gaddr;
+ unsigned int i;
+
+ /*
+ * Steal some space from the last found RAM region. One page will be
+ * used for the identity page tables, and the remaining space for the
+ * VM86 TSS. Note that after this not all e820 regions will be aligned
+ * to PAGE_SIZE.
+ */
+ if ( hvm_steal_ram(d, PAGE_SIZE + HVM_VM86_TSS_SIZE, ULONG_MAX, &gaddr) )
+ {
+ printk("Unable to find memory to stash the identity map and TSS\n");
+ return -ENOMEM;
+ }
+
+ /*
+ * Identity-map page table is required for running with CR0.PG=0
+ * when using Intel EPT. Create a 32-bit non-PAE page directory of
+ * superpages.
+ */
+ ident_pt = map_domain_gfn(p2m_get_hostp2m(d), _gfn(PFN_DOWN(gaddr)),
+ &mfn, &p2mt, 0, &rc);
+ if ( ident_pt == NULL )
+ {
+ printk("Unable to map identity page tables\n");
+ return -ENOMEM;
+ }
+ for ( i = 0; i < PAGE_SIZE / sizeof(*ident_pt); i++ )
+ ident_pt[i] = ((i << 22) | _PAGE_PRESENT | _PAGE_RW | _PAGE_USER |
+ _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_PSE);
+ unmap_domain_page(ident_pt);
+ put_page(mfn_to_page(mfn_x(mfn)));
+ d->arch.hvm_domain.params[HVM_PARAM_IDENT_PT] = gaddr;
+ gaddr += PAGE_SIZE;
+ ASSERT(IS_ALIGNED(gaddr, PAGE_SIZE));
+
+ tss = map_domain_gfn(p2m_get_hostp2m(d), _gfn(PFN_DOWN(gaddr)),
+ &mfn, &p2mt, 0, &rc);
+ if ( tss == NULL )
+ {
+ printk("Unable to map VM86 TSS area\n");
+ return 0;
+ }
+
+ memset(tss, 0, HVM_VM86_TSS_SIZE);
+ unmap_domain_page(tss);
+ put_page(mfn_to_page(mfn_x(mfn)));
+ d->arch.hvm_domain.params[HVM_PARAM_VM86_TSS] = gaddr;
+
+ return 0;
+}
+
+static int __init hvm_setup_p2m(struct domain *d)
+{
+ struct vcpu *saved_current, *v = d->vcpu[0];
+ unsigned long nr_pages;
+ int i, rc;
+ bool preempted;
+
+ nr_pages = compute_dom0_nr_pages(d, NULL, 0);
+
+ hvm_setup_e820(d, nr_pages);
+ do {
+ preempted = false;
+ paging_set_allocation(d, dom0_paging_pages(d, nr_pages),
+ &preempted);
+ process_pending_softirqs();
+ } while ( preempted );
+
+ /*
+ * Special treatment for memory < 1MB:
+ * - Copy the data in e820 regions marked as RAM (BDA, BootSector...).
+ * - Identity map everything else.
+ * NB: all this only makes sense if booted from legacy BIOSes.
+ * NB2: regions marked as RAM in the memory map are backed by RAM pages
+ * in the p2m, and the original data is copied over. This is done because
+ * at least FreeBSD places the AP boot trampoline in a RAM region found
+ * below the first MB, and the real-mode emulator found in Xen cannot
+ * deal with code that resides in guest pages marked as MMIO. This can
+ * cause problems if the memory map is not correct, and for example the
+ * EBDA or the video ROM region is marked as RAM.
+ */
+ rc = modify_identity_mmio(d, 0, PFN_DOWN(MB(1)), true);
+ if ( rc )
+ {
+ printk("Failed to identity map low 1MB: %d\n", rc);
+ return rc;
+ }
+
+ /* Populate memory map. */
+ for ( i = 0; i < d->arch.nr_e820; i++ )
+ {
+ if ( d->arch.e820[i].type != E820_RAM )
+ continue;
+
+ rc = hvm_populate_memory_range(d, d->arch.e820[i].addr,
+ d->arch.e820[i].size);
+ if ( rc )
+ return rc;
+ if ( d->arch.e820[i].addr < MB(1) )
+ {
+ unsigned long end = min_t(unsigned long,
+ d->arch.e820[i].addr + d->arch.e820[i].size,
MB(1));
+
+ saved_current = current;
+ set_current(v);
+ rc = hvm_copy_to_guest_phys(d->arch.e820[i].addr,
+ maddr_to_virt(d->arch.e820[i].addr),
+ end - d->arch.e820[i].addr);
+ set_current(saved_current);
+ if ( rc != HVMCOPY_okay )
+ {
+ printk("Unable to copy RAM region %#lx - %#lx\n",
+ d->arch.e820[i].addr, end);
+ return -EFAULT;
+ }
+ }
+ }
+
+ if ( cpu_has_vmx && paging_mode_hap(d) && !vmx_unrestricted_guest(v) )
+ {
+ /*
+ * Since Dom0 cannot be migrated, we will only setup the
+ * unrestricted guest helpers if they are needed by the current
+ * hardware we are running on.
+ */
+ rc = hvm_setup_vmx_realmode_helpers(d);
+ if ( rc )
+ return rc;
+ }
+
+ return 0;
+}
+
static int __init construct_dom0_hvm(struct domain *d, const module_t *image,
unsigned long image_headroom,
module_t *initrd,
void *(*bootstrap_map)(const module_t *),
char *cmdline)
{
+ int rc;
printk("** Building a PVH Dom0 **\n");
+ /* Sanity! */
+ BUG_ON(d->domain_id);
+ BUG_ON(!d->vcpu[0]);
+
+ iommu_hwdom_init(d);
+
+ rc = hvm_setup_p2m(d);
+ if ( rc )
+ {
+ printk("Failed to setup Dom0 physical memory map\n");
+ return rc;
+ }
+
return 0;
}
@@ -1670,6 +1926,7 @@ int __init construct_dom0(struct domain *d, const
module_t *image,
void *(*bootstrap_map)(const module_t *),
char *cmdline)
{
+ process_pending_softirqs();
return (is_hvm_domain(d) ? construct_dom0_hvm : construct_dom0_pv)
(d, image, image_headroom, initrd,bootstrap_map, cmdline);
--
2.7.4 (Apple Git-66)
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |